Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Stanley 55 question

Posts

Stanley 55 question

#1

Stanley 55 question

Bill Tindall, E.TN

>When was this plane set first made?

I inherited a Stanley 55. I was told it belonged to a distant relative who could not have been actively woodworking much into the 1900's. So, I am wondering if it in fact could have been his plane.

I also have a set of wooden planes and a brace also attributed to this cabinet maker. I would presume the wood planes and Stanley are from the same relative, who ever they are.

Re: Stanley 55 question

#2

Re: Stanley 55 question

walt q

>1897-1962

not a type study but Patrick has a decent amount of info:

http://www.supertool.com/StanleyBG/stan8.htm#num55

there's a type study of the 45 in the back of my Walter's book, I think it would translate fairly well to the 55

quick and dirty

check the logo (should be on one of the skates)...use Bob Kaune's logo guide..

http://www.antique-used-tools.com/stantms.htm

that'll get you close enough for rock 'n roll

walt

Re: Stanley 55 question

#3

"close enough for rock 'n roll"

Bill Houghton, Sebastopol, CA

>Is that a more or less precise tolerance than "good enough for government work?"

Re: Stanley 55 question

#4

Jim DeLaney, Austintown, Ohio

Re: Stanley 55 question

Jim DeLaney, Austintown, Ohio

>Walter's book says "Manufactured 1897~1963.

Type 1 (1897~1905) will have the 9/19/1893 and 1/22/1895 patents stamped on the skates.

Jim D.

Re: Stanley 55 question

#5

Re: "close enough for rock 'n roll"

Kevin French Antrim, NH

>Come on Bill, I resemble that remark. ;>)

Re: Stanley 55 question

#6

So did I

Bill Houghton, Sebastopol, CA

>I figure I can get away with it, after 30 years as a gubmint bureaucrat. Side note: I read, somewhere, that somebody did a survey of workers and found that government workers, as a group, did the most unpaid overtime. That sure makes sense to me, thinking about all the extra hours I offered the university.

Bill, currently dealing with a private bureaucracy that ignored a letter I sent them a year and a half ago, requiring me to send another letter now to get probably $100 on behalf of my parents...

Re: Stanley 55 question

#7

thanks

Bill Tindall, E.TN

>It could be the relative's plane. The plane/cutters have not been used much which is consistent with it being bought late in his cabinet making career.

Re: Stanley 55 question

#8

Re: Stanley 55 question

Dave Thompson

>Looking it up in Dave Heckel's 133 page Stanley #45 type study, he attributes Traut and Schade's patent of Jaunary 22, 1895 (#532,842) to what eventually became the Standly #55. That seems to align with an 1897 production date mentioned earlier.