Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Made this timber mallet today. (a.k.a."persuader")

Posts

Made this timber mallet today. (a.k.a."persuader")

#1

Made this timber mallet today. (a.k.a."persuader")

Alan DuBoff

>The head is made of laminated hard maple, 12 1/2" long, 5 1/2" wide, and 7" high. The head weighs about 12 lbs. without the handle.

I got the handle from Homer, it's a 36" hickory 6 - 16 lb. sledge handle.

Kinda dwarfs my chisel mallet sitting next to it.

Cheers,

Alan


img

Re: Made this timber mallet today. (a.k.a."persuader")

#2

Re: Made this timber mallet today. (a.k.a."persuad

Wiley Horne--So. Calif.

>Alan,

Is that for when you want to move the house over a skosh bit on the foundation? Very impressive!

Wiley

Re: Made this timber mallet today. (a.k.a."persuader")

#3

Re: Made this timber mallet today. (a.k.a."persuad

Alan DuBoff

>Wiley,

Not just for the sills, but for all the timber.

When you fit them together, you need one of these to knock them in place, making sure they fit nice and (*hopefully*) tight.

They sell one at Japan Woodworker and a couple of the log home supply stores that is 5" x 5" x 9 3/4" and has metal straps around the ends so it doesn't split, but honestly, you don't hit the logs that hard, you just need to knock them in place but need something that has enough mass to do the job.

Cheers,

Alan (planning out a tool tote, this mallet will not go inside;-)

Re: Made this timber mallet today. (a.k.a."persuader")

#4

Re: Made this timber mallet today. (a.k.a."persuad

Bill Houghton, Sebastopol, CA

>Nice. Classier than the chunk of log Sloane shows in his books.

what's that interesting looking piece of steel or something dark to the left of the persuader?