Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

In praise of Southern pine

Posts

In praise of Southern pine

#1

In praise of Southern pine

Patrick Gibbons, Katy, TX

>I've been building a tool chest and because of romantic notions chose to use Southern yellow pine. Poplar would have been a cheaper and somewhat easier choice. I needed wood that was a full one inch thick after surfacing (5/4 stock obviously). Surprisingly, it's very difficult, even here in the pine forest, to get yellow pine other than two by stock. My easiest remedy was to buy stair treads at either borg. My local Home Depot has not just the usual 4 footers but is stocking six foot stair treads. After I cut off the bullnose they are about 10 7/8" wide. I'm getting lots of riftsawn or quartersawn boards out of these and they're seven and a half board feet for only $10.99 S4S and bullnosed. I've been researching longleaf pine, the so-called heart pine that is available from reclaimed boards. It is a true loss that this wood is not available as it was a century ago. It is as hard as red oak on the Janka scale, stable, strong, beautiful stuff. It requires periodic fires in the forest to weed out other trees to allow the pure stands that were here in the beginning. That and its slow growth means I won't be seeing its resurgence in my lifetime.

Re: In praise of Southern pine

#2

Re: In praise of Southern pine

Dave Thompson

>I don't use it very often, though once I built a large storage workbench out of SYP. I enjoyed working with it. Mortising SYP was a pleasure. 45 degree planes worked cleaner than York as I recall.