General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Jack Guzman from Maine 1/15/20, 6:16 PM
4 Replies · 39 ViewsLast post 1/15/20, 10:45 PM by Dick Coers -
More on removing waste from half blind sockets
by Derek Cohen (in Perth, Australia) 1/15/20, 10:27 AM
0 Replies · 73 ViewsLast post 1/15/20, 10:27 AM by Derek Cohen (in Perth, Australia) -
Scorched Earth Advice on Shellac
by David Weaver 1/13/20, 3:50 PM
13 Replies · 47 ViewsLast post 1/14/20, 10:16 PM by David Weaver -
by Bill Tindall, E.TN. 1/12/20, 5:26 PM
20 Replies · 62 ViewsLast post 1/14/20, 6:57 AM by Derek Cohen (in Perth, Australia) -
by Ralph Lipeles 1/13/20, 10:57 PM
3 Replies · 43 ViewsLast post 1/14/20, 3:33 AM by David Yoho -
Pinakothek der Moderne - Part 1
by Derek Cohen (in Perth, Australia) 1/12/20, 8:39 PM
8 Replies · 59 ViewsLast post 1/13/20, 4:36 PM by Derek Cohen (in Perth, Australia) -
Bed side dressers are underway.
by Bill Tindall, E.TN. 1/12/20, 2:30 PM
4 Replies · 50 ViewsLast post 1/13/20, 4:20 PM by Bill Tindall, E.TN. -
Making my first piece from reclaimed pallet wood
by Barry Irby 1/11/20, 11:46 PM
10 Replies · 71 ViewsLast post 1/13/20, 10:40 AM by JL -
by Bill Tindall, E.TN. 1/12/20, 9:54 PM
1 Reply · 40 ViewsLast post 1/12/20, 11:34 PM by roger lance -
by Bill Tindall, E.TN. 1/12/20, 2:53 PM
2 Replies · 44 ViewsLast post 1/12/20, 10:37 PM by Derek Cohen (in Perth, Australia) -
by Tom Norton 1/12/20, 1:27 PM
1 Reply · 48 ViewsLast post 1/12/20, 8:56 PM by Joe -
You Tube Woodworker Observations.....
by Alan Young 1/8/20, 8:50 PM
22 Replies · 78 ViewsLast post 1/12/20, 4:58 PM by David Weaver -
by Keith Newton 1/9/20, 11:34 PM
12 Replies · 85 ViewsLast post 1/11/20, 7:43 PM by Yonak -
Somewhat OT - shed floor paint
by JL 1/11/20, 3:50 PM
2 Replies · 46 ViewsLast post 1/11/20, 7:12 PM by Clint Searl -
by Barry Irby 1/7/20, 5:45 PM
27 Replies · 197 ViewsLast post 1/11/20, 4:37 AM by Hank Knight -
by JL 1/10/20, 8:53 PM
1 Reply · 45 ViewsLast post 1/10/20, 11:14 PM by Bill Tindall, E.TN. -
Over the blade dust pick up question????
by Barry Irby 1/8/20, 2:14 PM
9 Replies · 76 ViewsLast post 1/10/20, 6:20 PM by Barry Irby -
by Pete in Holland MI 1/9/20, 12:59 PM
6 Replies · 49 ViewsLast post 1/10/20, 4:18 PM by John McGaw -
Interesting rope bed joinery - PICS
by Joe 1/7/20, 1:55 PM
5 Replies · 52 ViewsLast post 1/10/20, 1:44 PM by Joe -
by Joe 1/5/20, 5:10 PM
17 Replies · 81 ViewsLast post 1/10/20, 4:18 AM by Barry Irby -
by Tom Norton 1/9/20, 4:48 PM
4 Replies · 44 ViewsLast post 1/10/20, 1:02 AM by Barry Irby -
by Barry Irby 1/8/20, 10:13 PM
5 Replies · 78 ViewsLast post 1/9/20, 4:38 PM by Henry (Raleigh NC) -
by Barry Irby 1/8/20, 1:55 PM
4 Replies · 67 ViewsLast post 1/9/20, 12:56 PM by AZ -
by Joe 1/8/20, 10:48 PM
1 Reply · 46 ViewsLast post 1/9/20, 6:28 AM by Mike in Zuni VA -
by howgor 1/5/20, 8:57 PM
6 Replies · 49 ViewsLast post 1/7/20, 5:56 PM by Barry Irby -
by mark 1/4/20, 5:29 PM
14 Replies · 177 ViewsLast post 1/7/20, 2:57 PM by Bill Tindall, E.TN. -
by Joe 1/5/20, 5:23 PM
7 Replies · 57 ViewsLast post 1/7/20, 2:24 AM by Stuart Hough -
by Gary 12/31/19, 7:04 PM
10 Replies · 91 ViewsLast post 1/6/20, 9:34 PM by Yonak -
by howgor 1/5/20, 8:53 PM
1 Reply · 44 ViewsLast post 1/6/20, 5:17 AM by Dick Coers -
by Gary Smyth 1/1/20, 9:22 PM
14 Replies · 89 ViewsLast post 1/5/20, 4:51 PM by Joe shelton



