General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by JL 1/27/21, 5:20 PM
13 Replies · 126 ViewsLast post 1/28/21, 8:53 PM by John in NM -
Solid drawer bottoms: bevel vs rabbet 2
by Adrian Mariano 1/25/21, 7:51 PM
32 Replies · 345 ViewsLast post 1/27/21, 11:53 PM by Derek Cohen (in Perth, Australia) -
Finished leveling my slabs....
by Barry Irby 1/27/21, 1:43 PM
2 Replies · 53 ViewsLast post 1/27/21, 5:28 PM by J Barrett Irby Jr -
by Mark Mandell 1/26/21, 2:15 PM
9 Replies · 83 ViewsLast post 1/27/21, 2:48 PM by John in NM -
by Bill Tindall, E.TN. 1/22/21, 6:29 PM
16 Replies · 85 ViewsLast post 1/25/21, 5:47 PM by johannaj -
by Pat Evans 1/24/21, 1:55 PM
10 Replies · 86 ViewsLast post 1/25/21, 2:27 PM by Ray Carson - Lawrenceville, NJ -
Underbench cabinet: 14. Dovetailing for blood! *LINK* 2
by Derek Cohen (in Perth, Australia) 1/17/21, 2:03 AM
43 Replies · 183 ViewsLast post 1/24/21, 6:13 PM by John in NM -
Made firewood this past weekend
by Joe 1/18/21, 1:37 PM
12 Replies · 126 ViewsLast post 1/24/21, 3:46 PM by Larry Clinton At Frankfort, (Central) Indiana -
by Joe 1/24/21, 2:58 AM
1 Reply · 65 ViewsLast post 1/24/21, 3:51 AM by John in NM -
by Michael van pelt 1/23/21, 1:16 PM
10 Replies · 87 ViewsLast post 1/24/21, 12:59 AM by Michael van pelt -
by Tom Norton 1/19/21, 2:08 PM
16 Replies · 186 ViewsLast post 1/23/21, 7:44 PM by GolfSteve in Calgary -
by Buck Nall 1/21/21, 10:05 PM
18 Replies · 114 ViewsLast post 1/23/21, 5:25 PM by Jack Dover -
by John K Jordan 1/22/21, 8:06 PM
6 Replies · 103 ViewsLast post 1/23/21, 3:41 AM by John K Jordan -
by Buck Nall 1/22/21, 9:04 PM
0 Replies · 67 ViewsLast post 1/22/21, 9:04 PM by Buck Nall -
by Doug Ridley 1/21/21, 12:17 PM
7 Replies · 71 ViewsLast post 1/22/21, 8:16 PM by paul in AZ -
by Johanna Johanson 1/20/21, 8:37 PM
4 Replies · 83 ViewsLast post 1/22/21, 6:18 PM by John in NM -
by Joe W 1/18/21, 9:24 PM
9 Replies · 89 ViewsLast post 1/22/21, 2:11 AM by William Duffield -
OT - Anybody ever use a palm nailer underwater?
by Tim Greif - West of Chicago 1/20/21, 11:12 PM
6 Replies · 437 ViewsLast post 1/22/21, 1:15 AM by William Duffield -
Lighting question...Asking for a friend
by Barry Irby 1/19/21, 2:11 PM
6 Replies · 72 ViewsLast post 1/21/21, 9:02 PM by Pete in Holland MI -
by Jerry Gibbs 1/21/21, 1:07 AM
3 Replies · 64 ViewsLast post 1/21/21, 8:32 PM by Clint Searl -
Question on leveling slabs for table
by J Barrett Irby Jr 1/18/21, 11:23 PM
8 Replies · 137 ViewsLast post 1/20/21, 7:35 PM by William Duffield -
by J Barrett Irby Jr 1/20/21, 6:49 PM
0 Replies · 73 ViewsLast post 1/20/21, 6:49 PM by J Barrett Irby Jr -
Assembling the drawer and other cases
by Bill Tindall, E.TN. 1/20/21, 3:55 PM
0 Replies · 79 ViewsLast post 1/20/21, 3:55 PM by Bill Tindall, E.TN. -
by Derek Cohen (in Perth, Australia) 1/18/21, 3:17 PM
11 Replies · 69 ViewsLast post 1/20/21, 12:44 PM by Larry Clinton At Frankfort, (Central) Indiana -
by Tom Dunlap 1/18/21, 8:17 PM
0 Replies · 70 ViewsLast post 1/18/21, 8:17 PM by Tom Dunlap -
Payment received for furniture
by Bill Tindall, E.TN. 1/17/21, 1:55 PM
11 Replies · 55 ViewsLast post 1/18/21, 4:17 PM by Joe Fleming -
Drawer parts before dovetailing the drawers *LINK*
by Derek Cohen (in Perth, Australia) 1/15/21, 4:53 AM
8 Replies · 117 ViewsLast post 1/17/21, 5:31 PM by Henry (Raleigh NC) -
by Yonak 1/16/21, 6:10 AM
13 Replies · 72 ViewsLast post 1/17/21, 1:16 AM by Lee Schierer in McKean, PA -
by Tara Desmond 1/14/21, 8:35 PM
13 Replies · 99 ViewsLast post 1/16/21, 4:14 PM by Wiley Horne -
O.T. - R.I.P. Craftsman Shop Vacuum
by Jerry Nicholson 1/14/21, 7:02 PM
6 Replies · 85 ViewsLast post 1/16/21, 3:08 AM by Bill Houghton