General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Curt Putnam 1/4/21, 6:46 PM
16 Replies · 95 ViewsLast post 1/15/21, 11:22 PM by John McGaw -
by Buck Nall 1/13/21, 8:12 PM
6 Replies · 79 ViewsLast post 1/15/21, 10:43 PM by John K Jordan -
by Barry Irby 1/14/21, 1:27 AM
9 Replies · 72 ViewsLast post 1/15/21, 3:50 PM by Ralph Lipeles -
by Buck Nall 1/15/21, 2:44 AM
0 Replies · 67 ViewsLast post 1/15/21, 2:44 AM by Buck Nall -
by Tom Norton 1/12/21, 9:47 PM
10 Replies · 93 ViewsLast post 1/15/21, 12:54 AM by Don Stephan -
OT: How to Test Ungrounded GFCI's?
by Don Stephan 1/4/21, 11:52 PM
6 Replies · 79 ViewsLast post 1/15/21, 12:46 AM by Don Stephan -
by Bill Tindall, E.TN. 1/11/21, 12:12 AM
7 Replies · 72 ViewsLast post 1/14/21, 10:13 PM by William Duffield -
OT - the old is new again *LINK*
by Bill Houghton 1/14/21, 8:20 PM
0 Replies · 69 ViewsLast post 1/14/21, 8:20 PM by Bill Houghton -
by Ken Krawford 1/12/21, 12:46 PM
9 Replies · 89 ViewsLast post 1/14/21, 11:02 AM by Ken Krawford -
Construction, not woodworking....
by John in NM 1/10/21, 5:34 PM
12 Replies · 109 ViewsLast post 1/13/21, 10:41 PM by John in NM -
Making a flag case quick question...
by Joe 1/11/21, 2:34 PM
8 Replies · 117 ViewsLast post 1/13/21, 7:15 PM by Bruce, a MN Galoot -
Restoring color to exterior cedar
by Ralph Lipeles 1/12/21, 4:39 PM
4 Replies · 76 ViewsLast post 1/13/21, 12:36 PM by BernadetteBond -
by Barry Irby 1/9/21, 10:07 PM
4 Replies · 241 ViewsLast post 1/12/21, 7:26 PM by Jack Dover -
by Tom Norton 1/11/21, 1:53 PM
10 Replies · 107 ViewsLast post 1/12/21, 12:00 AM by walta -
Veritas MKII sharpening questions
by Barry Irby 1/9/21, 10:17 PM
3 Replies · 86 ViewsLast post 1/10/21, 9:34 PM by Paul Leuba -
by Joe 10/21/20, 1:06 PM
13 Replies · 289 ViewsLast post 1/10/21, 8:17 PM by romclark -
by Tom Dunlap 1/6/21, 6:08 PM
8 Replies · 153 ViewsLast post 1/10/21, 2:11 PM by Larry Clinton At Frankfort, (Central) Indiana -
by John lucas 1/8/21, 2:17 PM
10 Replies · 168 ViewsLast post 1/10/21, 1:48 AM by Jack Dover -
Drawers Step 1 nailing them together
by Bill Tindall, E.TN. 1/9/21, 7:48 PM
0 Replies · 88 ViewsLast post 1/9/21, 7:48 PM by Bill Tindall, E.TN. -
Starting a drawer campaign with some tips
by Bill Tindall, E.TN. 1/9/21, 3:51 PM
0 Replies · 91 ViewsLast post 1/9/21, 3:51 PM by Bill Tindall, E.TN. -
Photographing art work class *LINK*
by john lucas 1/8/21, 1:09 PM
9 Replies · 71 ViewsLast post 1/9/21, 1:05 PM by john lucas -
Porter Cable 24: Omni Jig 77240
by Michael van pelt 1/8/21, 6:56 PM
3 Replies · 122 ViewsLast post 1/9/21, 12:40 AM by Michael van pelt -
incorporating nostalgia in a desk
by Bill Tindall, E.TN. 1/8/21, 11:56 PM
0 Replies · 60 ViewsLast post 1/8/21, 11:56 PM by Bill Tindall, E.TN. -
by Bill Tindall, E.TN. 1/6/21, 3:26 PM
21 Replies · 143 ViewsLast post 1/8/21, 6:49 PM by Johanna Johanson -
How to know when vaccine for your cohort is
by Bill Tindall, E.TN. 1/5/21, 1:50 PM
9 Replies · 72 ViewsLast post 1/8/21, 3:14 PM by David Weaver -
by Svante Nilsson 1/7/21, 5:01 PM
3 Replies · 60 ViewsLast post 1/7/21, 7:27 PM by Bill Tindall, E.TN. -
Underbench cabinet: 12. Before the drawers
by Derek Cohen (in Perth, Australia) 1/7/21, 4:42 PM
0 Replies · 89 ViewsLast post 1/7/21, 4:42 PM by Derek Cohen (in Perth, Australia) -
by Bill Tindall, E.TN. 1/7/21, 12:34 AM
1 Reply · 44 ViewsLast post 1/7/21, 1:56 PM by David Weaver -
by Alan Young 1/7/21, 3:04 AM
2 Replies · 88 ViewsLast post 1/7/21, 6:19 AM by Martin S. -
Underbench cabinet: 10. A blind sliding dovetail
by Derek Cohen (in Perth, Australia) 1/3/21, 4:49 PM
9 Replies · 99 ViewsLast post 1/7/21, 1:46 AM by gwold