General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
Delta 12" bandsaw and starter capacitor
by Terry Alexander 1/7/08, 7:54 PM
4 Replies · 33 ViewsLast post 1/9/08, 6:03 PM by Paul Leuba -
by Todd 1/8/08, 3:49 AM
7 Replies · 32 ViewsLast post 1/9/08, 5:23 PM by Craig H -
Impatience With JessEm Out Of Stock Conditions
by George@Colonel's Workshop 1/7/08, 5:20 PM
3 Replies · 30 ViewsLast post 1/9/08, 4:22 PM by Brian Murphy -
binary woodworking - for the geeks here *LINK*
by Mike Hamilton 1/8/08, 3:22 AM
9 Replies · 28 ViewsLast post 1/9/08, 3:55 PM by Dan Donaldson -
Comments on the new Jointer/planner combo from Jet
by Rick Snyder 1/9/08, 4:04 AM
1 Reply · 23 ViewsLast post 1/9/08, 3:06 PM by Doug in VA -
by Barry Irby 1/6/08, 2:39 PM
9 Replies · 48 ViewsLast post 1/9/08, 2:31 PM by Mark Mandell - Gone Round In Jersey -
by Gary Evans Tallassee, TN 1/9/08, 12:23 AM
5 Replies · 33 ViewsLast post 1/9/08, 1:00 PM by Gary Evans Tallassee, TN -
by Ellis Walentine 1/8/08, 9:28 PM
3 Replies · 29 ViewsLast post 1/9/08, 9:24 AM by Ellis Walentine -
Norm say pocket screws weren't around 30-years ago
by awh 1/7/08, 6:53 PM
12 Replies · 44 ViewsLast post 1/9/08, 5:20 AM by Jason Roehl in Lafayette, IN -
The Opposite of the Saw Stop *LINK* 2
by Ray DuBose - Memphis TN 1/8/08, 12:21 AM
31 Replies · 119 ViewsLast post 1/9/08, 5:08 AM by Jason Roehl in Lafayette, IN -
OT: any market for a used hot tub?
by Dan Mitchell 1/7/08, 11:18 PM
9 Replies · 38 ViewsLast post 1/9/08, 4:44 AM by Brian in Brighton -
by Ken OakleyWarming Up St. Cloud, Fla. 1/8/08, 4:58 PM
6 Replies · 44 ViewsLast post 1/9/08, 2:33 AM by Ken OakleyWarming Up St. Cloud, Fla. -
by mdclor 1/6/08, 12:54 AM
10 Replies · 47 ViewsLast post 1/9/08, 2:22 AM by henthorn -
by Gary Camp, Bend, Oregon 1/6/08, 4:13 PM
21 Replies · 57 ViewsLast post 1/9/08, 12:25 AM by Glenn Madsen near San Francisco -
by Jesse Cloud 1/6/08, 6:16 PM
5 Replies · 32 ViewsLast post 1/9/08, 12:18 AM by Glenn Madsen near San Francisco -
Posting PICs on Wood Central question
by Ray Carson, Lawrenceville, NJ 1/8/08, 6:13 PM
5 Replies · 43 ViewsLast post 1/8/08, 11:29 PM by Ellis Walentine -
OTish: Material for Interior window trim?
by Ryan Stagg - Cincinnati 1/7/08, 5:28 PM
7 Replies · 54 ViewsLast post 1/8/08, 7:06 PM by NickB -
by Jim Orasky in Davenport IA 1/5/08, 2:03 PM
5 Replies · 37 ViewsLast post 1/8/08, 6:51 PM by Lou -
by Charlie M 1/7/08, 8:30 PM
5 Replies · 30 ViewsLast post 1/8/08, 6:21 PM by Ray Carson, Lawrenceville, NJ -
by Doug Reynolds in Seattle 1/7/08, 4:16 PM
3 Replies · 23 ViewsLast post 1/8/08, 6:11 PM by Dave Bair - Eaton Rapids -
by Martin from Granbury 1/6/08, 6:48 AM
12 Replies · 45 ViewsLast post 1/8/08, 4:37 PM by Jerry Nicholson -
by Doug Reynolds in Seattle 1/7/08, 4:21 PM
4 Replies · 35 ViewsLast post 1/8/08, 4:17 PM by Ron Jackson -
cabinet for shaper paraphernalia
by Clay Foster 1/7/08, 8:17 PM
5 Replies · 50 ViewsLast post 1/8/08, 3:37 PM by Jim Dillon -
by Wayne 1/8/08, 3:33 AM
1 Reply · 22 ViewsLast post 1/8/08, 3:20 PM by Tony - Memphis -
OT - asking for input on "site condos"....
by Roger Lance in GR, Michigan 1/7/08, 10:01 PM
4 Replies · 34 ViewsLast post 1/8/08, 2:47 PM by DJK -
by Will Williams 1/8/08, 1:50 PM
0 Replies · 26 ViewsLast post 1/8/08, 1:50 PM by Will Williams -
by Stephen Shepherd in the State of Deseret 1/8/08, 12:32 PM
0 Replies · 26 ViewsLast post 1/8/08, 12:32 PM by Stephen Shepherd in the State of Deseret -
by Joe Pack 1/6/08, 11:28 PM
10 Replies · 44 ViewsLast post 1/8/08, 5:48 AM by Joe Pack------WebKitFormBoundaryX0jMo4Jz1V75ll+G -
by Ken OakleyWarming Up St. Cloud, Fla. 1/8/08, 12:03 AM
2 Replies · 29 ViewsLast post 1/8/08, 5:29 AM by Robin Corell in Atascadero Ca -
by TheHeretic 1/7/08, 9:14 PM
2 Replies · 26 ViewsLast post 1/8/08, 5:15 AM by Rob Sandow



