Elm Picture
Ken OakleyWarming Up St. Cloud, Fla.
>This is a photo of Elm I asked about in previous thread
Knowledge You Can Build On — Est. 1998
Elm Picture
Ken OakleyWarming Up St. Cloud, Fla.
>This is a photo of Elm I asked about in previous thread
Re: Elm Picture-Pic-
Ken OakleyWarming Up St. Cloud, Fla.
>Bark
Re: Elm Picture
Robin Corell in Atascadero Ca
>You have chinese elm. It was widely planted as a cultivar because it was eroneously thought to be resistant to dutch elm disease. It is one of my favorites for turning. even though it is one of the few elms that does not have interlocking grain it seems to be tougher and less prone to spliting that many of its interlocking grain relitives.the sap wood will shrink a bit more than the heart but once dry it is just as strong and stable as the heart wood. the warm pinks and creamy whites will even out over time into a mellow light brown. it makes exceptional mallets and chisel handles, in fact I use it for all my chisel handles and I do not have metal hoops on the butts and the handles hold up with virtualy no signs of having ever been struck. I also use chinese elm for all my hammer handles and find it holds up better than hickory. When working the wood it has a very spicy peppery scent. I have found chinese elm to work a bit better than some of the other elms to thoe point of taking crisp detail when carving, though it still tends to be tough on edge tools.
The grain is somewhat unremarkable in the same way as oak and ash, though it is finer textured than either as well as being harder. I have found that the knots in chinese elm tend to be tight and stable as well as strong. the knots can chip out when runing through a planer but I never have any trouble when turning them. I should probably add that chinese elm can move and twist a bit but is very stable once dry. for this reason I always turn it dry.
While I relly like chinese elm I would question its desireability for pen turning where the trend is to use jewel like pieces of wood with exceptional grain. I forgot to add that it makes excelent rolling pins.
Robin
Re: Elm Picture
Thomas Skaggs, Foothills of Mount Level
>While it really is of no consequence I will warn you that Elm really smells awful when you turn it.
Tom
Re: Elm Picture
Ken OakleyWarming Up St. Cloud, Fla.
>Maybe it will keep the flies off me. And maybe stop my dog from lifting his leg next to mine.
Re: Elm Picture
Robin Corell in Atascadero Ca
>the distinctive smell of most types of elm can best be summed up by one of the many common names for winged elm, piss elm. Some types are more offensive than others and the smell mellows a bit as the wood dries. Chineses elm has its own distinctive scent and to me it is vey spicy with a peppery edge. Chinese elm does not smell like the other elms I have worked with.
Robin
Re: Elm Picture
Ken OakleyWarming Up St. Cloud, Fla.
>The piece I cut didn't smell bad at all.I bandsawed it, made a few passes over the jointer, and power sanded it. Not offensive at all. As the cut surface dries the heart wood darkens and the wood begins to look very nice. I will cut some pen blanks and see what I get as it really dries. Thanks guys.