Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Wood Guru Help Needed

Posts

Wood Guru Help Needed

#1

Wood Guru Help Needed

Ken OakleyWarming Up St. Cloud, Fla.

>A friend of my son in law works for a tree cutting/removal company and knowing I cut various woods into pen blanks for sale on Ebay he contacts me whenever they cut a tree he feels I could use for that purpose. Today my SIL stops and said his friend called and said they had just cut down an Elm tree. Did I want some logs.

Can't remember ever working with or seeing elm. I said OK.

It is very heavy so I assume it is hard. How does it machine, especially turn on a lathe? Any info or advice would be much appreciated. Remember this is Florida so Elm here may differ some from ,say Michigan.

Re: Wood Guru Help Needed

#2

Re: Wood Guru Help Needed

John Veerkamp

>I love to turn elm. It can havwe spectacular patterning and wild grain. It spalts easily. I only turn bigger things so I don't know how it'l work for pens or bottle stoppers, but I think it can be quite nice. It does require sharp tools since it can be prone to tear out. In Fla I suspect it is some variety of asian elm .

Good turning

John

Re: Wood Guru Help Needed

#3

what kind of elm?

Robin Corell in Atascadero Ca

>There are about half a dozen really common types of elm growing in the us. I have milled 4 elms and they were all diferent types and each has its own distict chariteristics. If you are familiar with the difference between red and white oak think of each type of elm with a similar amount of differance.

It can be very dificult to ID elm from just the bark but there are a couple that are distinctive enough. how about a pic of the bark and one of the long grain.

Robin