General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by jared 5/3/08, 1:14 PM
6 Replies · 25 ViewsLast post 5/4/08, 2:37 PM by Derek -
by Robert R Clough - Thorncraft 5/3/08, 3:39 PM
6 Replies · 14 ViewsLast post 5/4/08, 2:26 PM by Mike Farinella -
by steve mackay 5/4/08, 1:56 PM
0 Replies · 11 ViewsLast post 5/4/08, 1:56 PM by steve mackay -
Semi-OT: On-Screen Measurement Utility?
by Lee Gordon 5/2/08, 4:04 PM
7 Replies · 59 ViewsLast post 5/3/08, 4:16 PM by Lee Gordon -
Searching for Round Wood Register Covers PIC
by Lee Gordon 5/2/08, 7:04 PM
2 Replies · 38 ViewsLast post 5/3/08, 4:08 PM by Lee Gordon -
by Larry in NW Ohio 5/1/08, 5:00 PM
17 Replies · 192 ViewsLast post 5/3/08, 2:56 PM by Larry Clinton At Frankfort (Central)., Indiana -
by Dan Collins 5/1/08, 11:26 PM
7 Replies · 18 ViewsLast post 5/3/08, 2:55 PM by Dale Lenz -
by Tom Pilsbury (Chicago) 5/2/08, 10:52 PM
11 Replies · 28 ViewsLast post 5/3/08, 12:48 PM by del schisler -
by JL 5/2/08, 3:38 PM
3 Replies · 23 ViewsLast post 5/3/08, 2:59 AM by Bill Howatt -
by Jeff 5/2/08, 10:04 PM
2 Replies · 20 ViewsLast post 5/3/08, 1:21 AM by Curly Smith -
Building a Chuppa - ideas anyone?
by Ray Carson - Lawrenceville, NJ 4/28/08, 6:53 PM
20 Replies · 81 ViewsLast post 5/3/08, 12:55 AM by Ken Platt (Granby, CT) -
by Carol - now in NC Nebraska 5/2/08, 7:20 PM
2 Replies · 19 ViewsLast post 5/2/08, 11:52 PM by albertabob -
by Kneale Brownson Dreaming of the Snow in N. MI 5/1/08, 10:26 PM
6 Replies · 21 ViewsLast post 5/2/08, 10:38 PM by Pat Evans -
by Bill Tindall, E.TN. 5/2/08, 4:50 PM
2 Replies · 61 ViewsLast post 5/2/08, 5:55 PM by Eddie Pacheco; San Jose, Ca. -
Paper backed or solid wood veneer?
by Terry in Edmonton 5/2/08, 4:49 PM
1 Reply · 16 ViewsLast post 5/2/08, 5:28 PM by Thomas S Stockton -
by Bill Grumbine 5/1/08, 12:26 PM
6 Replies · 33 ViewsLast post 5/2/08, 5:04 PM by Bill Tindall, E.TN -
Inca jointer/planer parts source
by Thomas M Keady 5/1/08, 4:07 PM
2 Replies · 13 ViewsLast post 5/2/08, 4:52 PM by Thomas M Keady -
by Barou 5/1/08, 8:46 PM
8 Replies · 62 ViewsLast post 5/2/08, 4:15 PM by paul in AZ -
by Alan Young 5/1/08, 12:48 PM
27 Replies · 139 ViewsLast post 5/2/08, 1:16 PM by steve antonucci -
Slightly OT: Trip to San Antonio *LINK*
by Roy Anderson 5/2/08, 10:52 AM
0 Replies · 24 ViewsLast post 5/2/08, 10:52 AM by Roy Anderson -
by Jon Grider 4/25/08, 12:17 AM
8 Replies · 37 ViewsLast post 5/2/08, 6:38 AM by Robert W -
by Wayne Carson "TX" 4/30/08, 7:58 PM
4 Replies · 19 ViewsLast post 5/2/08, 2:15 AM by Bob Entwisle -
by Ron Hildreth 4/30/08, 1:25 AM
16 Replies · 92 ViewsLast post 5/1/08, 11:33 PM by Doug Ridley -
by David Ragan 4/30/08, 12:28 PM
4 Replies · 22 ViewsLast post 5/1/08, 9:13 PM by Ellis Walentine -
by Chuck in ND 4/30/08, 2:26 PM
4 Replies · 30 ViewsLast post 5/1/08, 7:48 PM by Ralph Turney -
by Dustmaker Mike 4/30/08, 4:27 PM
2 Replies · 21 ViewsLast post 5/1/08, 5:20 PM by Bill Hammond, Oregon Coast -
by Dustmaker Mike 5/1/08, 10:58 AM
4 Replies · 21 ViewsLast post 5/1/08, 5:17 PM by Bill Hammond, Oregon Coast -
OT Question on Synthetic Motor oil
by Barry Irby 4/26/08, 1:33 PM
15 Replies · 49 ViewsLast post 5/1/08, 4:48 PM by Jason Roehl in Lafayette, IN -
by Thomas Skaggs 4/29/08, 6:28 PM
17 Replies · 39 ViewsLast post 5/1/08, 3:28 PM by Glenn Madsen, SF Bay Area -
So, how many straight router bits do you have?
by JL 4/29/08, 8:39 PM
9 Replies · 35 ViewsLast post 5/1/08, 3:47 AM by Larry Clinton At Frankfort (Central)., Indiana



