Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

8" grinder fenders

Posts

8" grinder fenders

#1

8" grinder fenders

Carol - now in NC Nebraska

>I have a wonderful very old Craftsman grinder, given to me by a friend who's Dad got it 50 years ago or more. Great motor with bearings that run on for 3 minutes or more after shutting the motor off. So it is a keeper.

However, I put 8" wheels on it and need the fenders or wheel covers.

So does anyone have a dead 8" grinder and would be willing to let me have the wheel fenders? Any brand ought to do. I am fairly handy making things work. This would save me from fabricating something from scratch.

Thanks. Ideas welcome. BTW, I have already rejected going back to 6" wheels, so please don't go there.

Re: 8" grinder fenders

#2

The case for 7" wheels

Bill Tindall, E.TN

>7' is the standard size for surface grinder wheels. Hence, they are on sale always from MSC, Travers, Enco, for example. They are available in every imaginable grit, and bond. Their cheapness enables one to have on hand a variety of wheels ideally suited for every task. I find the hollow grind from a 7" wheel ideal for rapid subsequent honing.

The first thing I do on a new grinder is junk the side covers.

Re: 8" grinder fenders

#3

Re: 8" grinder fenders

albertabob

>Carol, build yourself a little hooded box (mdf) that accepts the grinder inside.

Your problems are over for about 10-12 bucks.

Bob