Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Building a Chuppa - ideas anyone?

Posts

Building a Chuppa - ideas anyone?

#1

Building a Chuppa - ideas anyone?

Ray Carson - Lawrenceville, NJ

>To the gang,

Friends want me to build a chuppa. They want it to be sort of rustic, with the four posts being birch or something close. The rest is up to me.

I've researched some suppliers and found kits and others who supply 6-8 ft. birch poles, ranging from 1 1/2" to 2 1/2". Four 8 foot posts 2" round were around $180.00.

Just short of going into a local woods and cutting my own, this is the cheapest way I could find. I must add that I have to do this as cheaply as possible. Cheap is the key word here.

I will go on record here and say that I have NO intention of cutting down four trees for a temporary chuppa. I don't care how cheap anybody wants it.

All suggestions are welcome.

Sincerely,

Ray

Re: Building a Chuppa - ideas anyone?

#2

Re: Building a Chuppa - ideas anyone?

Kneale Brownson enjoying snow in N. MI

>How about four lengths of Schedule 40 pipe decorated with strings of flowers to hold up the canopy?

Re: Building a Chuppa - ideas anyone?

#3

Building a Chupah- one idea! *LINK*

Lee Schierer - McKean, PA

>Use the pvc pipe mentioned earlier (or wood posts) and cover it with wall paper from the link below.

Lee


Birch Bark

Re: Building a Chuppa - ideas anyone?

#4

Re: PVC Chuppa

Ray Carson - Lawrenceville, NJ

>Well.........that is cheap....and rustic. Maybe a little too industrial though. I found pictures of such a chuppa and also thought PVC would be cheap.

Thanks for the input Kneale.

Ray

Re: Building a Chuppa - ideas anyone?

#5

Re: covered PVC Chuppa

Ray Carson - Lawrenceville, NJ

>Now that's a great idea Lee! Kneale suggested the PVC also and it is cheap. (see reply to Kneale)

The whole idea is, what does one do with the chuppa when one is done with it. Unless it's carved from a single piece of oak finished in 20 coats of shellac (reference to the movie "Meet the Parents") and will remain in a yard or room of a house then it's going in the trash. I believe it's custom to keep the patterned cloth that drapes from the four poles as a momento of the ceremony. Wallpaper is a great idea though.

Thanks,

Ray

Re: Building a Chuppa - ideas anyone?

#6

Jesper, Denmark

OK, I'll bite. What's a Chuppa?

Jesper, Denmark

>

Re: Building a Chuppa - ideas anyone?

#8

Re: covered PVC Chuppa

Curly Smith

>according to this website: http://www.findajp.com/chuppafaqs.htm

Q: What are the poles made of? How heavy are they?

A: The poles are made of wood (white or white and gold-colored) or metal (gold-colored. They each weigh about 3 1/2 pounds. They are very attractive as is or you may wish to decorate them partially with flowers or vines.

Why not go with the PVC pipe already mentioned and gold wallpaper? Or, a nice ivy wallpaper?

Re: Building a Chuppa - ideas anyone?

#9

definition

Nat Robison

>....that I found online. It's a canopy supported by 4 poles, typically used in Jewish weddings.

In the movie "Meet the Parents", Owen Wilson's character made one for the wedding.

Re: Building a Chuppa - ideas anyone?

#10

Re: covered PVC Chuppa

Kneale Brownson Dreaming of the Snow in N. MI

>Another version of PVC would be to make a fabric sleeve that flowers could be pinned to. White or gold or something similar fabric. A PVC cap would make a rounded end the sleeve could cover. Pretty straight forward to sew a sleeve with a sewing machine.

Re: Building a Chuppa - ideas anyone?

#11

Re: OK, I'll bite. What's a Chuppa?

Howard Norman

>Jesper, glad to see that I wasn't the only one that didn't know what a Chuppa was. I looked it up and found the answer.

h

Re: Building a Chuppa - ideas anyone?

#12

Re: Building a Chuppa - ideas anyone?

Ina Cabanas

>We were married over 20 years ago in a home-made chuppa. My sister & her husband made it & then we modified it for us. If I remember correctly it was just 4 4X4 pieces of wood with a frame on top that was screwed to the 4 poles. A sheet covered the top. I remember decorating the poles with store bought (cheap) silk (or whatever the material was) flowers. I strung them up all poles & around the top of the square frame around the sheet. It looked great, was easy to put together & easy to take apart. It shouldn't cost too much either. Good luck. Ina

Re: Building a Chuppa - ideas anyone?

#13

Re: bamboo

Justin Fields

>I'll second the bamboo. Looks good. Grows like a weed, so you can cut in good conscience. Doesn't even really need any finishing.

Justin

Re: Building a Chuppa - ideas anyone?

#14

Seriously, I know that they are

Gary Smyth

>your friends, and you may be dealing with a "bridezilla" but for a one time event I'd tell them you would rather do/make something else for them on "their day" then get them to rent one. Around here, $60.00 will rent one, deliver it, set it up, and take it away within fifty miles for a small fuel charge of around thirty additional bucks. You can decorate with flowers and branches ribbons using 19th century western, Victorian, or Adirondack, ocean shore, whatever, styles for little in additional cost. You can make them something they can use for a longer period of time after the ceremony. If a wind blows, do you really want your item to fail because you (with good reason--given the time of use) shorted on the materials and especially, hardware to do it right? Don't make work where a better, less expensive, very, very soon to be discarded item can be used.

Re: Building a Chuppa - ideas anyone?

#15

Re: Building a Chuppa - ideas anyone?

Philip Berman, Montville NJ

>I think that traditionally, the chuppa was held up by 4 guests, for whom it was an honor to participate in such a way. The ceremony is very short, and by using people, your requirements are simpler - can be 4 branches or twigs.

Phil

Re: Building a Chuppa - ideas anyone?

#16

Re: OK, I'll bite. What's a Chuppa?

Chuck in ND

>I bought one once at Taco Johns, or was it Taco Bell ? I'm so confused.

Re: Building a Chuppa - ideas anyone?

#17

Re: Purchased at Taco Bell - LOL :-)

Ray Carson - Lawrenceville, NJ

>

Re: Building a Chuppa - ideas anyone?

#18

Re: Seriously - Well said

Ray Carson - Lawrenceville, NJ

>Hey Gary,

You nailed everything. I agree, rent one is my opinion...but.....

What are you going to do? Thanks for the words of advice.

Sincerely,

Ray

Re: Building a Chuppa - ideas anyone?

#19

Re: Building a Chuppa - Thanks everyone. :-)

Ray Carson - Lawrenceville, NJ

>

Re: Building a Chuppa - ideas anyone?

#20

Re: Building a Chuppa - ideas anyone?

BrianA

>When I was married 30 years ago I took 4 closet poles and stained them with plant hooks on the edge of the top. I used my Tallit as the canopy. As it was just held by friends light weight was good. It was the first time anyone had made one and the synagogue asked if they could keep them. Simple is good!

Brian

Re: Building a Chuppa - ideas anyone?

#21

I had to ask my wife....

Ken Platt (Granby, CT)

>What we used for poles. I mean, it's been 16 years...tomorrow.

Anyhow, she said her father got some dowels and stained them. I'm guessing it was 4' lengths, and I remember them being held up as another poster mentioned.

If it had to be floor-standing, you could use two lengths of 4' dowel joined by a smaller dowel in the center. I'm not sure the joint could stand much stress, though.

I thought the bamboo was the best idea. Attractive, sturdy, usable afterwards for plant stakes. IIRC, there was a thread here a couple weeks ago mentioning that you could get bamboo poles at HD for a couple bucks each.

We got married outdoors, and the wind made the chupa fabric (my father's tallit) flap wildly. The rabbi suggested we take it down and that the blue sky made for a natural chupa held up, as it were, by God. I gave her credit for spontaneity. I don't know what happened to the dowels, but my dad still has his tallit.

Good luck.

Ken