General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Barry Irby 9/14/11, 11:56 AM
8 Replies · 44 ViewsLast post 9/19/11, 3:58 PM by Bill Tindall, E.TN. -
Weekend accomplishments #1 and #2
by Stuart Hough 9/19/11, 5:37 AM
3 Replies · 23 ViewsLast post 9/19/11, 3:57 PM by Keith Newton----Little Rock, Arkansas -
by Barry Irby 9/18/11, 12:54 PM
2 Replies · 16 ViewsLast post 9/18/11, 3:50 PM by Barry Irby -
Seeking sites that sell metric parts.
by roger lance 9/17/11, 5:54 PM
8 Replies · 48 ViewsLast post 9/18/11, 3:17 PM by Larry Clinton At Frankfort, (Central) Indiana -
by Will Williams 9/16/11, 7:38 PM
4 Replies · 52 ViewsLast post 9/18/11, 11:40 AM by Lee Schierer McKean, PA -
by Tom Sontag 9/16/11, 10:12 PM
5 Replies · 59 ViewsLast post 9/18/11, 1:33 AM by JL -
by clay foster 9/16/11, 3:09 AM
8 Replies · 78 ViewsLast post 9/18/11, 12:44 AM by Barbara Gill -
by Wayland 9/17/11, 11:08 PM
3 Replies · 16 ViewsLast post 9/18/11, 12:25 AM by Larry Clinton At Frankfort, (Central) Indiana -
by marvin ewing 9/16/11, 4:35 PM
11 Replies · 67 ViewsLast post 9/17/11, 11:04 PM by Richard McComas -
Thank you all for the Prayers....
by Barry Irby 9/17/11, 1:41 PM
4 Replies · 12 ViewsLast post 9/17/11, 9:25 PM by Don Newman -
by Larry in NW Ohio 9/17/11, 6:36 PM
0 Replies · 17 ViewsLast post 9/17/11, 6:36 PM by Larry in NW Ohio -
by Bruce, a MN Galoot 9/15/11, 2:06 PM
23 Replies · 28 ViewsLast post 9/17/11, 10:34 AM by Leo Cuellar -
by Carol Reed 9/9/11, 2:18 PM
8 Replies · 88 ViewsLast post 9/17/11, 5:45 AM by Doug Turner -
by Ken 9/16/11, 12:30 AM
9 Replies · 80 ViewsLast post 9/16/11, 11:10 PM by Ken -
Hitachi Cordless Drill - Opinion Wanted
by Ralph Lipeles 9/15/11, 1:44 PM
11 Replies · 36 ViewsLast post 9/16/11, 9:57 PM by Kneale Brownson -
Varnish Chemistry and Swedish Wooden ware
by Bill Tindall, E.TN. 9/14/11, 2:39 PM
4 Replies · 24 ViewsLast post 9/16/11, 5:53 PM by Bill Tindall, E.TN. -
by Barry Irby 9/16/11, 1:48 PM
2 Replies · 23 ViewsLast post 9/16/11, 3:28 PM by John in NM -
by Bill Laing 9/15/11, 8:21 AM
5 Replies · 14 ViewsLast post 9/16/11, 5:31 AM by Bill Laing -
by Michelle McLaughlin 9/15/11, 8:39 AM
1 Reply · 13 ViewsLast post 9/16/11, 2:25 AM by Mike Circo -
by FredD 9/15/11, 3:00 AM
2 Replies · 17 ViewsLast post 9/16/11, 2:20 AM by William A. Roland -
by Steve Strickland 9/14/11, 2:08 PM
17 Replies · 59 ViewsLast post 9/15/11, 9:27 PM by TdomD -
by Bill Tindall, E.TN. 9/14/11, 9:52 PM
15 Replies · 58 ViewsLast post 9/15/11, 4:20 PM by Jim Dillon -
Whoohoo, Verizon just upgraded to 4G
by Bill Tindall, E.TN. 9/12/11, 11:41 PM
8 Replies · 118 ViewsLast post 9/15/11, 3:59 PM by David Weaver -
by steve mackay 9/14/11, 10:24 PM
2 Replies · 15 ViewsLast post 9/15/11, 12:39 PM by steve mackay -
by Keith Newton 9/14/11, 1:54 AM
3 Replies · 19 ViewsLast post 9/14/11, 10:26 PM by steve mackay -
Wiring for 240V Shop Equipment
by John McGaw 9/14/11, 12:27 AM
15 Replies · 78 ViewsLast post 9/14/11, 9:35 PM by John McGaw -
by FredD 9/14/11, 1:26 AM
4 Replies · 22 ViewsLast post 9/14/11, 9:26 PM by Jason Roehl in Lafayette, IN -
WC Weekend Accomplishments.....
by Dennis E Peacock 9/12/11, 2:25 PM
20 Replies · 44 ViewsLast post 9/14/11, 5:05 PM by Mark Mandell - Gone Round In Jersey -
Anybody ever mount a dust collector upside down?
by Rob Sandow 9/13/11, 11:14 PM
5 Replies · 74 ViewsLast post 9/14/11, 3:09 PM by Bill Houghton -
OT - static electricity when planing
by Terry Alexander 9/11/11, 8:09 PM
5 Replies · 33 ViewsLast post 9/14/11, 2:41 PM by Larry Clinton At Frankfort, (Central) Indiana



