We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
#1) Finished a 12 day run with two corporate visits and still made it out alive to start vacation. BIG accomplishment!
#2) Finished creating the tenons for the stretchers on the "FRW", my First Real Workbench (big ego lift for this neophyte). So far the base is coming along nicely, though slowly. Now on to the mortises. I need to build some sort of stock support that will work with my benchtop type Drill Press so I can hog out the bulk of the mortises with a Forstner bit.
If you are going to be cleaning up with a chisel, I don't know why you wouldn't just drill freehand.
Or better yet. If you want to make a jig for mortises, you should make one for a router. I made one back in the eighties somewhat like Tage Frid's which I still use regularly.
Sounds like a good idea, Keith. If you have a chance, maybe you could email a diagram of your jig. I'm open to any and all ideas that make things easier. Thanks!
Stuart, That was an article in FWW back in the B&W days, and I'm sure you can find it online somewhere. It probably has even been covered here. If you can't find it, send me an email, and I will send you some pics.