Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Sawstop outfeed table

Posts

Sawstop outfeed table

#1

Sawstop outfeed table

marvin ewing



After having my Sawstop for several years and using rollers as my outfeed table, I finally built a real outfeed table. I now can cut a 4x8 sheet of plywood without any problems. I'm surprised that with the table dropped down, I can raise the saw and roll it around the shop when I need to but probably won't have to.

Re: Sawstop outfeed table

#2

Well done Marv!

Mike Farinella

And you shop is to die for.

Re: Sawstop outfeed table

#3

Looks great!!

Bruce, a MN Galoot

Are you sure you work in that shop?? :D

Re: Sawstop outfeed table

#4

Re: Looks great!!

FredD

One has to admire the extra effort in keeping a Shop clean and neat, makes it a pleasure to work in and your fits the bill.

FredD

Re: Sawstop outfeed table

#5

Jesper, Denmark

Re: Pristine shop......

Jesper, Denmark

How d'ya do it? Can you get your cleaning lady to emigrate to DK?

hiny top, shiny varnished floor, not a speck of dust anywhere? The only proof that something actually happens there is the worn sanding belts - properly vacuumed off, I bet?

Re: Sawstop outfeed table

#6

Re: Pristine shop......

marvin ewing

The shop doesn't normally stay that clean - it does get used a lot. We built the shop about 16 years ago - 1400 square feet including lumber storage. I do like working on the hardwood floors except when it gets slippery after saw dust hits it. By the way, it has central air and heat.

Re: Sawstop outfeed table

#7

Clint Searl

Re: Sawstop outfeed table

Clint Searl

How do you make stuff without making sawdust?

Clint

Re: Sawstop outfeed table

#8

Re: Sawstop outfeed table

marvin ewing

You don't. It is just a home shop. I should have said my wife and I built it with some help from our two sons. I am retired so I used it a lot.

Re: Sawstop outfeed table

#9

"...it has central...heat..."

Bill Houghton, Sebastopol, CA

If I stand in the center of my shop and jump up and down until I'm sweating, I have central heat too.

Re: Sawstop outfeed table

#10

two part outfeeds are the best!

Tom Sontag - St. Louis

I am unsure why anyone has anything less. Well done!

Re: Sawstop outfeed table

#11

Re: Sawstop outfeed table

Jim Dillon

Marvin,

Beautiful shop and I like the two-part design of your outfeed table as that makes a lot of sense. Thanks for posting.

Jim

Re: Sawstop outfeed table

#12

Re: Sawstop outfeed table

Richard McComas

Very nice, both shop and table saw run off table.

How about some construction details so we can copy you?