Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Seeking sites that sell metric parts.

Posts

Seeking sites that sell metric parts.

#1

Seeking sites that sell metric parts.

roger lance

I have a PowerMatic 719A hollow chisel mortiser that I dearly love....and I want to improve some of the hardware on it by adding some adjustable handles and nuts...but need metric as the tool was made in Taiwan and I'm not having much success locally finding these parts....any suggestions for vendors that carry metric will be much appreciated. Thanks in advance.

Re: Seeking sites that sell metric parts.

#2

Re: Seeking sites that sell metric parts.

Larry in NW Ohio

Roger I`m not sure what you may be looking for besides nuts and bolts, but you may try www.McMaster.com and use-enco.com they both have metric. Good luck with what your looking for. Larry

Re: Seeking sites that sell metric parts.

#3

Re: Seeking sites that sell metric parts.

Larry Clinton At Frankfort, (Central) Indiana

Reid Supply carries a lot of metric tool parts - handles, bearings, etc for industrial use I used them before I retired. Good outfit, www.reidsupply.com

Re: Seeking sites that sell metric parts.

#4

Re: Seeking sites that sell metric parts.

John McGaw

I'll second that. They had loads of good stuff that I've retrofitted onto my metric machines, their prices were quite reasonable, and they had no minimum order (or at least they didn't have any the last time I used them).

Re: Seeking sites that sell metric parts.

#5

Steve Strickland

Re: Grainger


Re: Seeking sites that sell metric parts.

#6

Re: Grainger

larry in nw ohio

Steve Doesn`t Grainger sell only to industrial or the such, and not to individuals at least around here that`s what they do. We have an outlet arount here and I`ve tried a couple of times and they will not sell to us little people. So I told them I`d go to McMaster. Larry

Re: Seeking sites that sell metric parts.

#7

Steve Strickland

Re: Online store is for everyone


Re: Seeking sites that sell metric parts.

#8

McMaster's cheaper anyhow...

John in NM

There's about two or three things I buy at Grainger's local warehouse, but if going mail order I tend to go to McMaster instead.

Re: Seeking sites that sell metric parts.

#9

Re: Grainger

Larry Clinton At Frankfort, (Central) Indiana

As an Engineer in manufacturing I purchased a lot of items from Grainger. They do have a graduated discount system, IE manufactures that purchase direct get a small discount around 10 -15%, Resellers like Napa get 30% - Individuals purchasing online pay retail. Sometimes you can obtain an item cheaper going through a reseller - don't know all the resellers, but the local Napa is one - as they will order it and hand it to you - sometimes on larger items only adding 10 ~ 15% to their cost.