Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

walnut and steel table

Posts

walnut and steel table

#1

walnut and steel table

Tom Sontag - St. Louis

It has been awhile since I have posted here and even longer since I shared some work, so in order to let you all know I am still lurking and enjoying good 'ol WoodCentral, here is my latest effort.

The design was inspired by a slab of 3/4" (HEAVY) steel and is not complicated. In fact, the only challenge was the 2 1/2" thick miters which are bigger than the table saw cut and shooting board plane I used to make them. Block plane, scraper and square helped get them tight. One coat of walnut dye and two coats of garnet shellac is the finish schedule.

My sister wanted something to put a cable TV box on so I hung a small shelf underneath which disappears when viewed from above. The earlier idea of a lower shelf detracted from the overall look, but she would not let me eliminate it entirely, which the design wanted. Something about the whole purpose of the project or some such twaddle. ;-)




Re: walnut and steel table

#2

Re: walnut and steel table

Robin Corell in Atascadero CA

nice looking table, simple and ellegant.

Re: walnut and steel table

#3

Re: walnut and steel table

Larry in NW Ohio

Tom That`s a nice table, but the only thing is, how do you move it. That slab of steel itself has to weigh 200-300 hundred pounds. Larry

Re: walnut and steel table

#4

Ah, Weight A Minute, Larry

George Colonel's Workshop-Havertown PA

Yes Larry,

I was thinking the same thing. Its a forceful design, and well done. Its mass may make it difficult to blow away in a hurricane. 8) Tom, how much DOES it weigh?

George

Re: walnut and steel table

#5

weight

Tom Sontag - St. Louis

The guy who cut the steel guessed it weighed 200 pounds, but I am (barely) able to carry it a few feet without too much back damage. I'd say 150 - 200 pounds tops. If anyone knows how to calculate it, it is 3/4 x 37 x 12.

I am going to get help to deliver it.

Next table has a stone top. It sounds lightweight to me!

Re: walnut and steel table

#6

JL

Re: weight

JL

37 x 12 x 0.75 = 333 cubic inches or 5457 cubic centimeters.

5457 cc x 7.85 grams/cc = 42,845 grams (42.8 kg)

42.8 kg x 2.2 lbs/kg = 94.4 lbs

That is presuming it is mild steel at 7.85 grams/cc.

As an aside, when I was a younger lad, we made a name plaque for our Frat house out of a 36" x 36" x 3/4" slab. We got tired of the other frats trashing our sign. The first time they hit it with a baseball bat, the bat broke and it made a very loud "bong".