General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Bill Tindall, E.TN. 8/6/19, 12:12 AM
2 Replies · 22 ViewsLast post 8/6/19, 3:04 PM by Yonak -
by Derek Cohen (in Perth, Australia) 7/27/19, 5:32 PM
19 Replies · 43 ViewsLast post 8/5/19, 6:14 PM by Sgian Dubh -
by Barry Irby 8/4/19, 2:40 PM
10 Replies · 98 ViewsLast post 8/5/19, 2:50 PM by Mark Mandell -
by Gordon P Patnude 8/2/19, 4:42 AM
5 Replies · 38 ViewsLast post 8/4/19, 5:00 PM by CharlieL -
by Gary Smyth 8/3/19, 3:42 PM
2 Replies · 23 ViewsLast post 8/4/19, 3:06 AM by Gary Smyth -
by Hank Knight 7/30/19, 9:43 PM
15 Replies · 38 ViewsLast post 8/3/19, 3:33 PM by William Duffield -
Furniture by 100 year old Al Hudson
by john lucas 8/2/19, 7:32 PM
7 Replies · 79 ViewsLast post 8/3/19, 12:50 PM by Kneale Brownson -
For those with small children/grandchildren
by Bill Tindall, E.TN. 8/2/19, 12:37 AM
12 Replies · 48 ViewsLast post 8/3/19, 11:22 AM by Bill Tindall, E.TN. -
Mixed wood cutting board questions
by Barry Irby 7/28/19, 2:32 PM
10 Replies · 37 ViewsLast post 8/2/19, 7:56 PM by William Duffield -
Sequoia tongue and groove boards
by Mark Nowicki 8/1/19, 11:52 PM
3 Replies · 38 ViewsLast post 8/2/19, 7:50 PM by William Duffield -
by Bill Tindall, E.TN. 8/1/19, 1:26 PM
7 Replies · 24 ViewsLast post 8/2/19, 4:03 PM by david weaver -
Harlequin table: final pictures
by Derek Cohen (in Perth, Australia) 7/30/19, 5:21 PM
12 Replies · 24 ViewsLast post 8/1/19, 11:59 AM by AZ -
by john lucas 7/27/19, 9:57 PM
13 Replies · 129 ViewsLast post 7/30/19, 11:57 PM by Larry Rupprecht -
Interesting (to me) piece of Redwood....
by Barry Irby 7/26/19, 9:54 PM
5 Replies · 33 ViewsLast post 7/29/19, 3:47 PM by david weaver -
by Roy 7/25/19, 5:01 PM
5 Replies · 24 ViewsLast post 7/27/19, 6:24 PM by Roy -
by Bill Tindall, E.TN. 7/23/19, 7:31 PM
5 Replies · 34 ViewsLast post 7/26/19, 1:38 PM by Mark Mandell -
by david pe crossland 7/25/19, 7:29 PM
2 Replies · 22 ViewsLast post 7/26/19, 12:49 AM by Dick Coers -
by Randy Stukenberg 7/23/19, 9:34 PM
14 Replies · 89 ViewsLast post 7/25/19, 4:55 PM by Roy -
by Randy Stukenberg 7/24/19, 4:53 PM
3 Replies · 21 ViewsLast post 7/25/19, 3:26 AM by Bill Houghton -
by Don Stephan 7/24/19, 12:04 AM
4 Replies · 117 ViewsLast post 7/24/19, 11:50 PM by John K Jordan -
by Svante Nilsson 7/20/19, 1:58 PM
4 Replies · 28 ViewsLast post 7/24/19, 1:04 PM by Svante Nilsson -
by Mike L 7/22/19, 5:22 PM
20 Replies · 109 ViewsLast post 7/24/19, 2:40 AM by walta -
by Bill Tindall, E.TN. 7/23/19, 7:26 PM
0 Replies · 67 ViewsLast post 7/23/19, 7:26 PM by Bill Tindall, E.TN. -
by Gary Smyth 7/22/19, 9:01 PM
3 Replies · 46 ViewsLast post 7/23/19, 6:55 PM by Gary Smyth -
data various metals plane blade edge life
by Bill Tindall, E.TN. 7/23/19, 10:43 AM
0 Replies · 60 ViewsLast post 7/23/19, 10:43 AM by Bill Tindall, E.TN. -
by William Duffield 7/20/19, 5:50 PM
2 Replies · 22 ViewsLast post 7/23/19, 2:01 AM by William Duffield -
Collet reducer for router questions?
by Barry Irby 7/22/19, 8:00 PM
4 Replies · 52 ViewsLast post 7/23/19, 12:17 AM by Chuck -
by JL 7/19/19, 8:41 PM
26 Replies · 295 ViewsLast post 7/22/19, 11:52 PM by Bruce, a MN Galoot -
by Jerry Gibbs 7/19/19, 1:27 AM
11 Replies · 66 ViewsLast post 7/22/19, 6:44 PM by Rum -
by Bill Tindall, E.TN. 7/19/19, 4:39 PM
5 Replies · 30 ViewsLast post 7/20/19, 1:18 PM by Kneale Brownson