Build Homes for Homeless Birds – Complete Plans & Cutting Lists. Easy, attractive designs that actually work. Download today!

Tuning Hammer planner/jointer

Posts

Tuning Hammer planner/jointer

7/20/19, 1:58 PM #1

Svante Nilsson
Member
Offline
84 posts

Registered: 1/19/04

Tuning Hammer planner/jointer

Svante Nilsson

Hi,

I have a 4 year old Hammer A3-41 where the outfeed table is a bit misaligned. I was tempted to make the adjustment without a guide but hesitated as it looks a bit complex. In the instruction manual there are no hints. I did find a good guide from Felder USA but it was an older or newer model. Anybody knows where I can find a manual?

Regards,

Svante

Re: Tuning Hammer planner/jointer

7/20/19, 11:51 PM #2

Derek Cohen (in Perth, Australia)
Member
Offline
6,307 posts

Registered: 2/6/03
Website

Re: Tuning Hammer planner/jointer

Derek Cohen (in Perth, Australia)

Svante, this question has been asked and answered at the SawMill Creek forum on a few occasions, and not so long ago. With videos. It is worth a trip there.

Regards from Perth

Derek