General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Mike McNerney 8/21/19, 9:48 PM
9 Replies · 55 ViewsLast post 8/23/19, 12:36 AM by Gary Smyth -
by Don Stephan 8/19/19, 3:00 PM
4 Replies · 38 ViewsLast post 8/23/19, 12:26 AM by Don Stephan -
Removing the waste from half blind sockets *LINK*
by Derek Cohen (in Perth, Australia) 8/19/19, 6:28 AM
12 Replies · 59 ViewsLast post 8/22/19, 7:03 PM by William Duffield -
by Mike L 8/22/19, 10:59 AM
2 Replies · 33 ViewsLast post 8/22/19, 3:28 PM by Mike L -
Galvanized Screw in Poplar Tree
by Yonak 8/19/19, 6:14 PM
11 Replies · 65 ViewsLast post 8/22/19, 2:06 AM by Yonak -
Serpentine Drawer Fronts Cock Bead
by Doug Reynolds 8/21/19, 6:15 PM
3 Replies · 27 ViewsLast post 8/21/19, 9:50 PM by Bill Tindall, E.TN. -
Corner cupboard finish selection strategy
by Bill Tindall, E.TN. 8/21/19, 1:46 PM
4 Replies · 75 ViewsLast post 8/21/19, 6:46 PM by William Duffield -
by Mark Mandell 8/13/19, 12:46 PM
14 Replies · 39 ViewsLast post 8/21/19, 5:26 PM by Pete in Holland MI -
Gluing, fitting door frames to a cabinet
by Bill Tindall, E.TN. 8/20/19, 8:54 PM
2 Replies · 25 ViewsLast post 8/21/19, 3:25 PM by William Duffield -
Question on CBN grinding wheels *LINK*
by E Phillip Smith 8/21/19, 2:38 PM
0 Replies · 66 ViewsLast post 8/21/19, 2:38 PM by E Phillip Smith -
by John McGaw 8/19/19, 2:06 PM
9 Replies · 57 ViewsLast post 8/20/19, 10:06 PM by Kneale Brownson -
Preserving oxygen cured finish like varnish
by Bill Tindall, E.TN. 8/18/19, 2:54 PM
9 Replies · 32 ViewsLast post 8/20/19, 8:34 PM by david weaver -
Corner Cupboard Stained and one coat
by Bill Tindall, E.TN. 8/18/19, 2:43 PM
1 Reply · 36 ViewsLast post 8/19/19, 12:55 PM by Joe -
Tiny house mobile workshop *LINK*
by JL 8/18/19, 7:09 PM
4 Replies · 35 ViewsLast post 8/19/19, 10:21 AM by Larry Clinton At Frankfort, (Central) Indiana -
by Mike L 8/15/19, 2:45 PM
19 Replies · 120 ViewsLast post 8/19/19, 2:19 AM by Mike L -
Lumber dehumidifier EBAC LD800
by Adam 8/18/19, 3:19 PM
1 Reply · 25 ViewsLast post 8/18/19, 5:45 PM by Kneale Brownson -
by Doug Reynolds 8/17/19, 8:17 PM
1 Reply · 38 ViewsLast post 8/17/19, 8:33 PM by Dick Coers -
by Barry Irby 8/15/19, 6:03 PM
8 Replies · 41 ViewsLast post 8/17/19, 5:07 PM by Kneale Brownson -
by Thomas Skaggs 8/14/19, 1:34 PM
9 Replies · 45 ViewsLast post 8/17/19, 10:08 AM by Jim Matthews -
Old Singer treadle sewing machine - cleaning, etc.
by JL 8/7/19, 12:04 AM
7 Replies · 45 ViewsLast post 8/14/19, 9:45 PM by Keith Mealy -
Township Fair Idea--Whirligigs, Weather-Vanes
by John W Foster 8/14/19, 7:05 PM
2 Replies · 33 ViewsLast post 8/14/19, 8:43 PM by John McGaw -
OT Repairing Carbon Fiber Question
by Barry Irby 8/12/19, 12:48 PM
12 Replies · 75 ViewsLast post 8/14/19, 5:14 PM by Don Goodwin -
O'skool miter gauge - Anyone know about company? *LINK*
by Craig Daymon 8/12/19, 7:02 PM
6 Replies · 531 ViewsLast post 8/14/19, 3:15 PM by Craig Daymon -
by Joe 8/11/19, 5:36 PM
14 Replies · 52 ViewsLast post 8/13/19, 9:09 PM by Larry verhff -
How Meaningful are Good Reviews?
by Don Stephan 8/12/19, 10:52 PM
2 Replies · 28 ViewsLast post 8/13/19, 9:28 AM by David Yoho -
by JL 8/10/19, 4:01 PM
11 Replies · 28 ViewsLast post 8/11/19, 10:11 PM by Andy Lincoln in Dearborn,MI. -
by Barry Irby 8/11/19, 3:23 PM
0 Replies · 63 ViewsLast post 8/11/19, 3:23 PM by Barry Irby -
by Brad Chenoweth 7/24/19, 4:34 PM
21 Replies · 131 ViewsLast post 8/10/19, 11:01 PM by Brad Chenoweth -
West Australian (Perth) Wood Show 2019
by Derek Cohen (in Perth, Australia) 8/4/19, 3:15 PM
18 Replies · 94 ViewsLast post 8/10/19, 5:52 PM by Clint Searl -
by Jerry Gibbs 8/8/19, 11:34 PM
7 Replies · 122 ViewsLast post 8/10/19, 12:14 AM by Pat Evans















