General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Mike L 9/7/19, 1:13 AM
0 Replies · 123 ViewsLast post 9/7/19, 1:13 AM by Mike L -
by Tom Norton 9/4/19, 6:17 PM
9 Replies · 48 ViewsLast post 9/5/19, 3:16 PM by walta -
by Paul Woolson 9/2/19, 3:28 PM
18 Replies · 76 ViewsLast post 9/5/19, 12:06 PM by DocJim -
by Ellis Walentine 8/28/19, 5:22 AM
5 Replies · 28 ViewsLast post 9/4/19, 11:44 PM by Joanne Adler -
by David Yoho 9/4/19, 2:26 AM
2 Replies · 30 ViewsLast post 9/4/19, 11:07 PM by Woodie49 -
by Barry Irby 9/2/19, 12:23 PM
14 Replies · 54 ViewsLast post 9/4/19, 8:01 PM by Mike in Zuni VA -
by Jerry Gibbs 9/3/19, 2:20 PM
9 Replies · 48 ViewsLast post 9/4/19, 2:41 PM by Bill Howatt -
by Kim Hudson 9/4/19, 12:55 AM
0 Replies · 80 ViewsLast post 9/4/19, 12:55 AM by Kim Hudson -
by Bill Tindall, E.TN. 9/1/19, 6:52 PM
7 Replies · 35 ViewsLast post 9/2/19, 7:00 PM by Bill Tindall, E.TN. -
Installing crown molding- a tip
by Bill Tindall, E.TN. 8/30/19, 7:20 PM
0 Replies · 62 ViewsLast post 8/30/19, 7:20 PM by Bill Tindall, E.TN. -
OT- Reverse Osmosis water system?? 2
by Tom Norton 8/24/19, 12:47 PM
29 Replies · 204 ViewsLast post 8/30/19, 3:13 PM by Tom Norton -
by Barry Irby 8/28/19, 9:15 PM
5 Replies · 43 ViewsLast post 8/30/19, 12:53 AM by John in NM -
by howgor 8/28/19, 4:31 PM
4 Replies · 41 ViewsLast post 8/30/19, 12:29 AM by North of the Border -
Bosch 3725 Random Orbit Sander
by Woodie49 8/28/19, 10:54 PM
5 Replies · 31 ViewsLast post 8/29/19, 11:45 PM by Woodie49 -
by Doug Reynolds 8/26/19, 1:17 AM
17 Replies · 49 ViewsLast post 8/28/19, 7:39 PM by William Duffield -
Door fitting and fixing an imperfection
by Bill Tindall, E.TN. 8/28/19, 1:40 PM
0 Replies · 47 ViewsLast post 8/28/19, 1:40 PM by Bill Tindall, E.TN. -
Best Surface for Portable Mini Golf
by John W Foster 8/26/19, 7:26 PM
2 Replies · 28 ViewsLast post 8/28/19, 11:28 AM by David NECT -
Johnson's Lumber Wood Expo *LINK*
by Dave Bair 8/27/19, 8:07 PM
0 Replies · 64 ViewsLast post 8/27/19, 8:07 PM by Dave Bair -
by Mike L 8/25/19, 1:49 AM
7 Replies · 46 ViewsLast post 8/27/19, 1:51 PM by Kneale Brownson -
Krenov rub catches for the corner cupboard
by Bill Tindall, E.TN. 8/26/19, 2:25 PM
3 Replies · 26 ViewsLast post 8/27/19, 12:06 AM by Henry (Raleigh NC) -
Anybody going to M-WTCA Raleigh
by Bill Tindall, E.TN. 8/26/19, 8:15 PM
0 Replies · 47 ViewsLast post 8/26/19, 8:15 PM by Bill Tindall, E.TN. -
Prototyping Rockers for a Windsor Chair
by Paul Leuba 8/25/19, 8:42 PM
4 Replies · 39 ViewsLast post 8/26/19, 5:18 PM by Paul Leuba -
by Mark Mandell 8/23/19, 12:23 AM
8 Replies · 35 ViewsLast post 8/25/19, 5:18 AM by Thomas T Dunlap -
Dewalt DW618PK Router problems
by Michael van pelt 8/24/19, 10:35 PM
0 Replies · 45 ViewsLast post 8/24/19, 10:35 PM by Michael van pelt -
Update on oversized table issue
by Kneale Brownson 8/23/19, 10:18 PM
2 Replies · 25 ViewsLast post 8/24/19, 12:28 PM by Hank Knight -
Re:john Lucas looking for Disston Abrader's?
by Deneece Trussell 8/23/19, 9:03 PM
0 Replies · 47 ViewsLast post 8/23/19, 9:03 PM by Deneece Trussell -
by Mike McNerney 8/21/19, 9:48 PM
9 Replies · 45 ViewsLast post 8/23/19, 12:36 AM by Gary Smyth -
by Don Stephan 8/19/19, 3:00 PM
4 Replies · 34 ViewsLast post 8/23/19, 12:26 AM by Don Stephan -
Removing the waste from half blind sockets *LINK*
by Derek Cohen (in Perth, Australia) 8/19/19, 6:28 AM
12 Replies · 49 ViewsLast post 8/22/19, 7:03 PM by William Duffield -
by Mike L 8/22/19, 10:59 AM
2 Replies · 26 ViewsLast post 8/22/19, 3:28 PM by Mike L