WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

OT- Reverse Osmosis water system??

Posts

Re: OT- Reverse Osmosis water system??

#26

Re: What unit?

Tom Norton

Thanks Walta! I must have missed it as I went through each reply.

I am interested bin mounting the unit in the basement and running the line up to the sink. I will check to see if this is possible.

Re: OT- Reverse Osmosis water system??

#27

Kneale Brownson

Well Wood

Kneale Brownson

I had a rental property at the foot of Grand Traverse Bay off of Lake Michigan where the well water was so bad it would turn a blonde's hair red. I had a well driller come in to replace the well. He hit a tree trunk 300 feet down. He found a good clay separator layer shortly thereafter and we had better water from that.

Re: OT- Reverse Osmosis water system??

#28

Re: What unit?

Paul Leuba

Our RO system is in the basement adjacent to the water softener. By running a 1/2” PVC pipe from the RO system to the vicinity of the faucet before adapting to the 1/4” tubing required by the RO faucet we achieved significantly greater water pressure at the faucet compared to making the run entirely in 1/4” tubing.

This configuration facilitates convenient access to the RO system for filter changes and any other maintenance that may be required.

Paul in Hunt Valley, MD

Re: OT- Reverse Osmosis water system??

#29

Re: What unit?

Tom Norton

Just ordered a 5 stage unit from US WaterSytems.

Re: OT- Reverse Osmosis water system??

#30

Re: What unit?

Tom Norton

We are going to do a remote install also. This unit use 3/8" tubing I was thinking of running it inside of plastic pipe to protect it as I run it cross the basement.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.