General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Jim Shaver - Oakville, Ont, Canada 8/3/09, 12:40 AM
0 Replies · 22 ViewsLast post 8/3/09, 12:40 AM by Jim Shaver - Oakville, Ont, Canada -
by Larry in NW Ohio 8/2/09, 10:17 PM
0 Replies · 26 ViewsLast post 8/2/09, 10:17 PM by Larry in NW Ohio -
Woodworking America exhibitors worth a visit
by Dick Coers 8/2/09, 2:59 AM
2 Replies · 11 ViewsLast post 8/2/09, 1:30 PM by Robert R. Clough - Thorncraft -
by Dan Mitchell 7/29/09, 11:35 PM
25 Replies · 84 ViewsLast post 8/2/09, 12:50 PM by Barry Irby -
by Sgian Dubh 8/1/09, 7:44 AM
6 Replies · 29 ViewsLast post 8/2/09, 8:17 AM by Sgian Dubh -
by ralph johnson 8/1/09, 7:45 PM
2 Replies · 27 ViewsLast post 8/1/09, 10:44 PM by Marv -
by Jerry Gibbs 7/30/09, 8:43 PM
12 Replies · 71 ViewsLast post 8/1/09, 9:24 PM by Gary Camp, Bend, Oregon -
Here's a sharpening system for the well equipped *LINK*
by Forrest Addy 8/1/09, 12:10 PM
7 Replies · 93 ViewsLast post 8/1/09, 7:47 PM by Bill Tindall, E.TN -
Audio lecture: How Envy Killed the Crafts Movement *LINK*
by David Barnett - SW FL Gulf Coast 7/31/09, 5:50 PM
1 Reply · 19 ViewsLast post 8/1/09, 5:45 PM by Clint Searl, at the base of Haycock Mtn -
OT - installing an electric oven
by Terry Alexander 7/31/09, 9:17 PM
13 Replies · 39 ViewsLast post 8/1/09, 3:46 PM by GalenV in Iowa -
by Walt 7/30/09, 8:56 PM
6 Replies · 14 ViewsLast post 8/1/09, 3:29 PM by Walt -
by Barry Irby 7/30/09, 11:40 PM
13 Replies · 22 ViewsLast post 8/1/09, 3:02 PM by George -
Sliding table alignment problem
by Starry Chan 7/31/09, 10:48 PM
4 Replies · 94 ViewsLast post 8/1/09, 1:55 PM by Jim Dillon -
To stain or not to stain...cherry
by Bill Tindall, E.TN. 7/28/09, 9:23 PM
14 Replies · 29 ViewsLast post 8/1/09, 1:11 AM by Martin from Texas -
by Dustmaker Mike 7/23/09, 11:54 AM
20 Replies · 30 ViewsLast post 7/31/09, 5:06 PM by Michael Wangler -
by Jerry Gibbs 7/27/09, 12:15 PM
18 Replies · 55 ViewsLast post 7/31/09, 4:51 PM by Michael Wangler -
by Pat Evans 7/30/09, 5:42 PM
5 Replies · 26 ViewsLast post 7/31/09, 4:45 PM by Yonak -
by Nat Robison 7/23/09, 4:40 PM
27 Replies · 122 ViewsLast post 7/31/09, 2:57 AM by Bill Houghton -
by Tony - Memphis 7/29/09, 4:58 PM
11 Replies · 22 ViewsLast post 7/31/09, 2:41 AM by Grant in Iowa -
OT Funny I hate when I do this(-;
by Dustmaker Mike 7/30/09, 1:25 AM
10 Replies · 11 ViewsLast post 7/31/09, 1:38 AM by Jason Roehl in Lafayette, IN -
by jared 7/28/09, 6:49 PM
5 Replies · 21 ViewsLast post 7/31/09, 1:32 AM by Jim Dillon -
by Thomas Skaggs 7/13/09, 2:31 PM
35 Replies · 62 ViewsLast post 7/30/09, 7:04 PM by Thomas Skaggs -
Something that might be fun w/the kids *LINK*
by Dan Mitchell 7/30/09, 6:54 PM
0 Replies · 19 ViewsLast post 7/30/09, 6:54 PM by Dan Mitchell -
Got me a new tool tote! *LINK*
by Eddie Pacheco; Antioch, Ca. 7/28/09, 5:49 PM
17 Replies · 25 ViewsLast post 7/30/09, 3:25 PM by Glenn Madsen near San Francisco -
by Kelly Anderson 7/27/09, 1:37 AM
7 Replies · 20 ViewsLast post 7/30/09, 2:54 AM by Kelly Anderson -
OT - Virginia Veterans Cemeteries. *LINK*
by JL 7/30/09, 12:56 AM
0 Replies · 25 ViewsLast post 7/30/09, 12:56 AM by JL -
by Edward in Vancouver 7/27/09, 5:27 PM
13 Replies · 32 ViewsLast post 7/29/09, 10:22 PM by Dan Donaldson -
by Greg Haugen 7/23/09, 7:05 PM
5 Replies · 18 ViewsLast post 7/29/09, 9:35 PM by Bill White -
refinishing Lane blanket chest
by Gil 7/29/09, 1:10 AM
3 Replies · 15 ViewsLast post 7/29/09, 4:16 PM by gil -
No More Tipping Trim Router *LINK*
by Bricofleur 7/28/09, 1:58 AM
5 Replies · 23 ViewsLast post 7/29/09, 2:54 PM by Gary Camp, Bend, Oregon



