Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

OT - GFCI circuit question

Posts

Re: OT - GFCI circuit question

#26

Re: Outlets BEFORE the GFCI are not protected.

Bill Houghton, Sebastopol, CA

>"A GFCI outlet will protect that outlet and all outlets after the GFCI."

IF the wiring is properly connected to the GFCI. The current must pass through the GFCI for this to work, which means connecting the wire entering the box - that is, the wire carrying current from the panel/subpanel - to the "line" side of the GFCI and the wire leaving the box - the wire carrying current to the outlets downstream from the box - to the "load" side of the GFCI.

Not complex, but does need saying.

Re: OT - GFCI circuit question

#27

Excellent point.

Joe Pack

>Good point. We always assume that the GFCI is wired properly, but if the wiring is not correct, the GFCI protects nothing except the GFCI outlet. Correct wiring of "line" and "load" is critical. Fortunately, all the GFCIs I have used have the proper wiring diagram and labeling right on the GFCI. Mistakes do happen, though. Be careful to follow all directions exactly.

Re: OT - GFCI circuit question

#28

Re: Excellent point.

Bill Houghton, Sebastopol, CA

>And not everyone understands "line" and "load." It's like any other trade, from custodial work to particle physics; you have to learn the basic jargon of the trade in order to learn the skills.