Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

OT - installing an electric oven

Posts

OT - installing an electric oven

#1

OT - installing an electric oven

Terry Alexander

>Homing in on the final steps of this "new" house.

We want to install our electric oven next to a wall. If you have been following these threads/questions, then you know that we are not subject to code out here in the "country".

Q: Is there a minimum distance that you should put an electric oven from a wall? Not the back wall, but next to an adjacent wall.

As always....TIA for your valued opinions/responses.

Terry Alexander in West Texas

Re: OT - installing an electric oven

#2

Re: OT - installing an electric oven

Chris Friesen

>I would expect this sort of thing to be listed in the manual for the oven...maybe see if you can take a look through a couple in the store.

Re: OT - installing an electric oven

#3

Re: OT - installing an electric oven

Nat Robison

>I have an electric oven in the wall in my house. I didn't put it in and I don't know if the person who did consulted any code but I'd say it's about 8" from an adjacent wall. If you think about it, range/oven combos are put in the middle of a cabinetry run all the time so they must be relatively safe for the surroundings. Let me know if I'm off-base.

Re: OT - installing an electric oven

#4

Re: OT - installing an electric oven

mdclor

>Terry,

Our kitchen was professionally designed and installed with the oven adjacent to a stud wall on one side and 2/3 against cabinets on the opposite side. It sits on a drawer unit and has the microwave on top of it. My suspicion is that the insulation is soooo good that there is no danger of charring any combustibles. We have had it for about a year and a half with no problems so far. It gets really hot, over 500* inside when the oven clean feature is run. However, I know nothing about these things, so consult a professional to be safe. Ours is a Dacor and other brands may have different requirements. YMMV.

HTH,

Merle

Re: OT - installing an electric oven

#5

JL

Re: OT - installing an electric oven

JL

>Are we talking an oven or a free standing range?

Many ovens are installed in cabinets. As such, I don't believe that installing them close to a wall would be any different. Of course my personal preference would be to install it in a place where it can be accessed from both sides. Look online or in a kitchen design book for proper placement of appliances and kitchen features. They have done a lot of studies on this.

Re: OT - installing an electric oven

#6

Distance is generally small...

John in NM

>The three slide in units I've installed have all been around 1" or less from the cabinets. It is usually specified in the installation instructions (good idea to have the appliances picked out and spec'd before building the kitchen). I'd guess you need about a minimum of 1/2" either side just for installation wiggle room.

Re: OT - installing an electric oven

#7

Re: OT - installing an electric oven

Bill Turpin in WNC mountains

>Follow the oven's instructions as to clearance. Pine (etc.) studs have an ignition temp of about 475�F. This temperature gradually lowers over time and exposure to heat. The rosin loses moisture and becomes a different chemical mix. This is why flue fires occur in fifty+ year old houses when support beams are supported by stone fireplaces.

Re: OT - installing an electric oven

#8

Re: Standalone Oven walls....

Kneale Brownson..Awaiting return to CO snows

>Are insulated and the oven space itself is ventilated enough that you should be able to put your hand on the outside surface and not get burned.

I don't know if they make or you can purchase an oven that doesn't have the standard exterior finish. If they do and you can, well then you might have an issue.

Re: OT - installing an electric oven

#9

Re: OT - installing an electric oven RTFM!

Bob Entwisle in NJ

>RTFM!

Read The Fine Manual that came with the appliance.

While "not being subject to code� makes it easy to do what you please without worry about code enforcement officials nixing your work or requiring changes, it�s not an excuse for substandard or dangerous installation work.

Appliances come with installation instruction with specific requirements for clearances etc. Follow the manufacturers recommended installation requirements if there is not an overriding local requirement.

Re: OT - installing an electric oven

#10

Re: OT - installing an electric oven

Fred Davis

>Terry,

since you didn't exactly say what your oven is , for instance , is it a wall oven , then it's in a cabinet , if it's a oven /range combination you need to say away from vertical combustible surfaces like wood paneling six inches minimum because of the heat from the range burners , not the oven.

If it is a range/combination unit and the adjacent wall is covered with say Ceramic tile , then the burner heat is not a factor.

Since Oven Cleaning cycles have been incorporated in Ovens , the insulation that is in the unit it's self will suffice .

On the other hand , close fitting range/oven combos like Jenn- Aire fit so closely to the cabinet on either side of the oven , when the Elaine runs the Cleaning cycle, I have told her to be around the Kitchen when that is happening.

That cycle is very hot.

FredD

Re: OT - installing an electric oven

#11

Re: OT - installing an electric oven

GalenV in Iowa

>I would not put a wall oven up against a side wall unless you are talking a short end wall that did not come out beyound the oven. No way would I try and lift a big roaster pan up to the oven and have my elbows hitting the wall. Then that's me.

Slide in range/oven the same with trying to use the burners/oven and up against the wall.

My slide in range/oven came with two extra chrome vent strips/spacers that provided the required minumum side venting of heat. It was set in at 45 on a corner and did not require with the extra space formed by the side cabinets but did it just to be safer.

Galen

Re: OT - installing an electric oven

#12

what I see in the land of TVA

Bill Tindall, E.TN

>Here in the land of TVA electric power every stove I see is just pushed against the wall. There is no installation, except providing a 220V outlet.

Re: OT - installing an electric oven

#13

Thanks for all the responses....

Terry Alexander

>...couple of questions asked in this thread.

Range/oven or just oven? Just an oven

Didn't come with an owners manual....was floor display model.

Yes....it is against a "short wall". The adjacent wall is 25" deep. And I think we all know the cabinet is 24" deep.

One last thing....even though we are not subject to code (except for the EPA (septic systems)), we are building the house to code simply for re-sale value (when that time comes...hopefully not anytime soon).

TA

Re: OT - installing an electric oven

#14

Re: Thanks for all the responses....

GalenV in Iowa

>Terry

I would check on line and see if the manufacture has manuals on line. If not maybe you could still make a request to get the installation sheets sent to you.

You might get lucky and if you go back to where you purchased it someone may find where they put the paperwork with a little more looking.

Galen