Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Got me a new tool tote! *LINK*

Posts

Got me a new tool tote! *LINK*

#1

Got me a new tool tote! *LINK*

Eddie Pacheco; Antioch, Ca.

>Rode this home yesterday evening. It handles really well and has a bit of trunk space for those occasional trips to HD or Lowe's...:-)

It's a 2007 Piaggio MP3 250ie three wheeler. I didn't like the extra weight of the 400 or 500cc MP3's. And, in that larger displacement and price, I'd rather get a real motorcycle. I picked it up in Oakland and rode it to my house in Antioch, via the freeways, and it did well. It was able to keep with the traffic flow, and handled some pretty strong crosswinds well, due to the extra weight of the bike. Zips around town pretty nice too. Good enough, I don't need to be super quick. It turns a lot of heads so maybe those inattentive, texting, blue tooth talking cagers (car drivers) will see me. Not betting on it of course.


img

Piaggio MP3 video clip, no sound

Re: Got me a new tool tote! *LINK*

#2

Re: Got me a new tool tote!

Bill Houghton, Sebastopol, CA

>We've got to get you involved in hand tools, for which that's just about the right size. No way could you fit a table saw in the trunk.

Looks like fun.

Re: Got me a new tool tote! *LINK*

#3

Oh, and

Bill Houghton, Sebastopol, CA

>having walked out to the parking lot on a summer day only to find that my BMW had fallen over because the side stand ate a hole in the asphalt - or, more accurately, the asphalt had melted under the stand - I can appreciate a motorcycle that will stand on its own at rest.

Re: Got me a new tool tote! *LINK*

#4

Re: Oh, and furthermore

Bruce, a MN Galoot

>having forgotten to put the side stand down only to have my 730 lb bike tip over on me, well, those three wheels look pretty attractive...

bruce

Re: Got me a new tool tote! *LINK*

#5

Re: Oh, and furthermore yet...

Glenn Madsen near San Francisco

>Not having to swing my leg over the back of the cycle to get on might make it easier to ride in nicer clothing.

Not certain that I'd ride this one between Antioch and Oakland much, though. That's a busy stretch of road. Maybe up to Sebastapol...

Re: Got me a new tool tote! *LINK*

#6

Always welcome

Bill Houghton, Sebastopol, CA

>It's a lot more fun telling lies in person than on the internet.

Re: Got me a new tool tote! *LINK*

#7

Segway? *LINK*

Mark Goodall - ATL - tooljunkie

>Very cool looking!

I can't decide if it looks more like a

- Segway with and extra wheel in the back for balancing

- street-version Quad missing a rear wheel.

- a modern version of the tiny mircocars (Trident and Peel, etc.) from the 60's

Guess when something looks that unusual it's bound to get all sorts of comments like that.

Looks cool!

So what does it feel like? Having ridden mostly dirt-bikes (current XR250R) and a quad once or twice, I'm wondering what this MP3 would feel like. I don't like quads because they don't lean like a bike does, but this MP3 looks like it leans just like a bike does, at least from the video.

Happy Woodworking!


http://www.darkroastedblend.com/2007/08/worlds-sma

Re: Got me a new tool tote! *LINK*

#8

Re: Oh, and

GalenV in Iowa

>Bill

Learned a long time ago to carry a piece of aluminum plate in my saddle bags to put under my side stand to keep it from sinking into asphalt, gravel or dirt. Saved me from a lot of headaches and repairs.

Galen

Only have a Yamaha V-Star 1100 Clasic now but it would still hurt to see in laying on it's side.

Re: Got me a new tool tote! *LINK*

#9

Re: Oh, and

Dan Donaldson

>I use an electrical box cover. The stand on my Harley is big enough itself for a lot of cases, but I have had a bike dump on hot asphalt also and it is definitely a downer to come out and see that ;-(

Re: Got me a new tool tote! *LINK*

#10

I may take you up on that.

Eddie Pacheco; Antioch, Ca.

>According to my phone you're only Sebastopol is 80.7mi from me. Yeah, talking about all those perfect hand cut dovetails in person is way better.

Re: Got me a new tool tote! *LINK*

#11

Segway!?

Eddie Pacheco; Antioch, Ca.

>Mark, most of the people that ride Segways here, in the Silicon Valley SF bay area, need to do some walking....

The first time I rode the MP3 was when I was heading out of the sellers driveway and on my way home. She offered to let me do a test ride before buying it, but I was afraid I was going to dump it. There is a suspension locking button on the right handlebar that I had gotten misinformation on. Some riders use it all the time at stop lights. If you hit the but at wrong time it won't lock and the rider won't know till too late. There is a light telling you it's not locked, but only lights up at a full stop. If the bike rolls a bit it shuts off, and you don't notice it until too late. I don't plan on using it at stoplights. What's wrong with putting your legs down to hold the bike?

Prior to this bike I was riding my SWMBO's Reflex as I liked it's handling and ABS brakes compared to my '99 Helix. Which I think is a very useful and comfortable scooter. With the Reflex's ABS I was getting lazy on the braking in that I knew I could brake late going into a turn or brake during a turn. Bad practice. That nearly got me in trouble on the Helix.

When I took off on the MP3 it did feel heavier on the turns,especially at slow speed. Yeah, almost like a quad. I then just started doing the normal counter steer and lean and it felt like a regular bike. I think it's a little slower off the line than the Reflex, but has a higher top end of 85 on the highway. I like the confidence of the two front contact patches on the road especially when there is some sand or gravel on the road. You also sit a little higher on this bike which makes it better to look over traffic and be seen, I hope.

I did take a look at, and have seen on the road, the other 3 wheeler that is made by Polaris. The suspension is more car like on those and ALL of the riders I've seen on those are leaning over way more than the bike in turns. On that bike the front suspension is gonna do what it wants to do. No two wheel lean sensation on that bike. Also, you can't lane split with it either. Don't see the point in having it. For the $15k selling price you can get a real nice Miata.

Not much else to report on it yet as I'm working on some house remodeling and have only ridden the bike twice. Antioch looks like a mostly Harley town so those guys have done a double take or two, or three when they see the bike. A woman attendant at a gas station in Orinda gave me some smack about missing a wheel and the bike looks weird, etc. It's a head turner that's for sure.

Some guys say it's a girls bike, but they say that about Harley Sportsters too. Ever try taking one of those off of it's side stand to get going?

Re: Got me a new tool tote! *LINK*

#12

Don't expect perfect hand cut dovetails from me *LINK*

Bill Houghton, Sebastopol, CA

>It's been so long since I've had shop time, as opposed to carpentry time, that any dovetails I made now would look more like vulture tails.

The county WW show is August 14-September 27 - It's not more than about an hour's drool time, but there's often some neat stuff.

And, September 12-13, Sturgeon's sawmill, a restored steam powered mill, is doing a demo weekend. I understand they've got some new stuff. No hardwood - they saw primarily redwood - but there are some neat demos.


Sturgeon's mill

Re: Got me a new tool tote! *LINK*

#13

Good idea

Bill Houghton, Sebastopol, CA

>I was young and dumb when it happened to me - after that, I looked around for flat rocks, cardboard, etc., or put it on the center stand.

I don't know what my excuse would be if I started riding again - old and dumb?

Re: Got me a new tool tote! *LINK*

#14

Sportsters and Blast *LINK*

Mark Goodall - ATL - tooljunkie

>Ya, die hard Harley riders are a fickle bunch. A Sportster is a "girls" bike. And the Buell Blast? Check out Erik Buell's comments on the Harley/Buell Blast.

Happy Woodworking!


http://www.buell.com/en_us/bikes/blast/

Re: Got me a new tool tote! *LINK*

#15

Re: Don't expect perfect hand cut dovetails from m

Thomas S Stockton------WebKitFormBoundaryRU4sWQOIA

>I'm going to have a piece in that show. You can drool on it just wipe it up.

Tom

Re: Got me a new tool tote! *LINK*

#16

That's cheaper than buying one of your pieces.

Eddie Pacheco; Antioch, Ca.

>I'll be sure to bring a micro-fiber towel with me, Tom.

Re: Got me a new tool tote! *LINK*

#17

Re: Oh, and

Bruce, a MN Galoot

>I came across a nice looking piece of diamond plate. Fits just right in my fairing pocket.

bruce, contemplating a new water pump in MN.

Re: Got me a new tool tote! *LINK*

#18

Re: That's always a good show

Glenn Madsen near San Francisco

>Most of the pieces there are top notch.

Some of them take a bit of getting used to, but that's the case with anything artistic.

Look forward to seeing it. I've been to that show maybe 4 times in the last 7 years.