Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Best glue?

Posts

Best glue?

#1

Best glue?

Edward in Vancouver

>For laminate on walls that is.

I o/o a chocolate shop and the walls in my chocolate room need to be surfaced with a smooth hard skin. Ceramic tile might be an option but it is expensive and grunge will eventually get in the grout. I frequently use a paint sprayer with chocoalte or cocoa butter on my molds and pieces* and the overspray is tedious to clean up-- a drywall knife work best on a smooth surface for this.

So laminate would probably be best. I'm not thrilled with contact cement as the odour isn't very nice, but I do know there are water based contact cements. Anyone use these? Are ther other glues that can be applied with a caulking gun, or is contact cement the best for walls?

*Said Wagner paint sprayer was bought brand new for this purpose......

Re: Best glue?

#2

No experience, but thoughts

Bill Houghton, Sebastopol, CA

>You used to be able to get tempered hardboard coated on one side with the same finish material as laminate - like the particleboard melamine, but with a thicker finish layer and less weight. This could be installed on a good substrate with construction adhesive (and aren't there some low-VOC construction adhesives now?). They were also wider: 4x8, rather than the narrower laminate sheets. I would also expect it to be less of a highwire act than with contact cement.

Re: Best glue?

#3

Re: Best glue?

john lucas

>I've used the water based and would not use anything else. However I'm not a professional carpenter and don't know how it holds up under abuse. The cabinet tops I built using it have held up for about 20 years. I switched from the non water based because my shop used to be in the basement and my wife hated the odor.

Re: Best glue?

#4

take a look at FRP Panels

awh

>I think you'll find that most prep rooms and restaurant kitchens use FRP (Fiberglass Reinforced Plastic) panels on their walls - can be held in place with construction adhesive - plus it's cheap (sold at the borgs) and I think would be easier to work with than trying to get 4x8 sheets of plastic laminate on a vertical surface.

Tony

Re: Best glue?

#5

Re: Best glue?

Terry in Edmonton

>If this is to go onto painted drywall I would go with construction adhesive such as PL2000 or PL400. I can't remember offhand which would be better in this application but the instructions and recommendations are on the tube. There is an odor but it isn't too bad. If you follow directions and make sure the wall is clean the bond is permanent.

Re: Best glue?

#6

Re: Best glue?

George Koch

>Ed, You could also use a notched trowel to apply tile mastic on the wall to make the bond. George

Re: Best glue?

#7

Wow!!!

mdclor

>What size N/N do you use for liquid chocolate? It's got to be thicker than latex paint, but also a lot rewarding to clean up after you are done spraying for the day. ;)

Re: Best glue?

#8

Re: Wow!!!

George@Colonel's Workshop-Havertown PA

>Yeah Merle,

You can chocolate up to experience!

George

Re: Best glue?

#9

another option completely *LINK*

Michael Dresdner

>One of the easiest ways to deal with spray booth cleanup is with waterbased peelable coating. You spray it onto the walls of a booth, and when it is time to clean up, you simply peel it off in sheets and spray on another coat. While it is made to work on metal, I suspect it would also peel off of some wall paints, such as Teflon loaded scrubable, washable kitchen paint. Thus, you might be able to simply paint the sheetrock walls, then use peelable coating atop that. There are many brands. Here's one to get you started.


http://www.strippablecoating.com/paint_booths.aspx

Re: Best glue?

#10

Re: another option completely

Edward in Vancouver

>Thanks gentelmen, I'll look into the FRP and construction adhesitive. Laminate was my first choice, and I'm not very picky about colours/styles, just a plain off-white or similiar is what I'm after. Painting walls with contact cement and hanging 4x8 sheets sounds like a recipie for disaster--latex based or not. The nice thing is that the room in question is about 6' x 7' so I can cut full sheets to size and don't have to worry about seams--except at the corners.

It's just a cheap Wagner 7.2 gal p/hr paint sprayer. You gotta thin out the warm chocolate with cocoa butter and strain it through very fine mesh (pantyhose...) and keep it warm while spraying. Smells nice when you spray it... Lately I've been using an airbrush and coloured cocoa-butter for colour relief as well.

Re: Best glue?

#11

How about some pics?

Dan Donaldson

>Sounds like I could gain at least 5 pounds just by looking at a picture ;-)

Re: Best glue?

#12

Re: How about some pics?

Edward in Vancouver

>I gotta learn how to post pics on this site.

Did a LV plan tool chest last year and it turned out pretty good--good enough to take pics of, Guys on the "Handtools" tell me seeing is believing, So I better start learning how to post.

For good wholesesome drooling on the screen (you can get your spouse to watch with you) you can check out my website:

www.schokoladecafe.com

Ellis, If I'm not allowed to do this, just cancel the link. Not to sure about non-ww'inkg links....

Re: Best glue?

#13

Re: Best glue?

Bill White

>Don't know what health inspections for sanitary conditions prevail for you, but I would think that a non-porous surface would be best. Most food plants use such a surface. Epoxy finish with a pebble look and feel. Call local health inspectors for the inside skinny about what will be best.

Bill

Re: Best glue?

#14

No problem

Dan Donaldson

>Posting links is fine in answer to questions. It would not be OK if it were just an ad trying to sell something, but that is not the case here. Beautiful candies. Drooling is right. ;-) That website could be hazardous to my health ;-)