General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Tom Pilsbury (Chicago) 5/2/11, 3:19 AM
13 Replies · 30 ViewsLast post 5/4/11, 5:45 PM by charlie belden -
Classic Shaker Cupboard FineWoodworking
by mike 5/3/11, 7:28 PM
4 Replies · 21 ViewsLast post 5/4/11, 2:11 PM by Tony - Memphis -
OT - Can you hear me now - not
by Ray Thompson - Middletown, IN 5/1/11, 1:12 AM
8 Replies · 21 ViewsLast post 5/4/11, 8:21 AM by Kurt -
by Larry in NW OHIO 5/3/11, 1:05 PM
6 Replies · 19 ViewsLast post 5/4/11, 7:30 AM by Kurt -
by Gary Smyth 5/3/11, 4:20 PM
2 Replies · 21 ViewsLast post 5/3/11, 7:33 PM by Neal in San Jose -
Question on spraying finish....
by Barry Irby 5/3/11, 3:06 PM
2 Replies · 17 ViewsLast post 5/3/11, 6:57 PM by del schisler -
by james runchey 5/2/11, 9:36 PM
5 Replies · 10 ViewsLast post 5/3/11, 4:39 PM by Dave Bair - Eaton Rapids -
by Stephen Shepherd 5/3/11, 1:00 PM
0 Replies · 14 ViewsLast post 5/3/11, 1:00 PM by Stephen Shepherd -
by Mark Meier 5/2/11, 6:48 PM
1 Reply · 11 ViewsLast post 5/3/11, 12:46 PM by Keith Newton----Little Rock, Arkansas -
by Scott Greaves 5/2/11, 3:49 PM
9 Replies · 23 ViewsLast post 5/3/11, 12:14 PM by Larry in NW OHIO -
Update: --- The LOML has comissioned *LINK*
by Rich Pearson in Mill Creek, WA 5/3/11, 3:48 AM
1 Reply · 26 ViewsLast post 5/3/11, 4:31 AM by Ray - Middletown, IN -
Anyone recognize "Jofco" office desk
by Frank on Chestnut Hill 5/2/11, 7:41 PM
3 Replies · 26 ViewsLast post 5/3/11, 2:04 AM by Frank on Chestnut Hill -
by Robert R. Clough 5/1/11, 2:49 PM
5 Replies · 17 ViewsLast post 5/3/11, 1:57 AM by Robert R. Clough -
WC Weekend Accomplishments....
by Dennis E Peacock 5/2/11, 12:58 PM
6 Replies · 20 ViewsLast post 5/3/11, 1:29 AM by Bill Tindall, E.TN. -
by Bill Tindall, E.TN. 5/2/11, 3:16 PM
8 Replies · 19 ViewsLast post 5/3/11, 12:02 AM by Dave Paine -
by Mike Farinella 5/2/11, 6:18 PM
2 Replies · 20 ViewsLast post 5/2/11, 11:53 PM by Don Orr -
by Ray - Middletown, IN 5/2/11, 8:48 PM
2 Replies · 18 ViewsLast post 5/2/11, 10:16 PM by Larry in NW OHIO -
by Steve Kirincich 5/2/11, 4:43 AM
5 Replies · 25 ViewsLast post 5/2/11, 9:32 PM by Mark Mandell - Gone Round In Jersey -
by Ray - Middletown, IN 5/2/11, 8:30 PM
1 Reply · 12 ViewsLast post 5/2/11, 8:38 PM by Ray - Middletown, IN -
by Gary Camp, Bend Oregon 5/1/11, 10:27 PM
6 Replies · 24 ViewsLast post 5/2/11, 8:05 PM by Gary Camp, Bend, Oregon -
Safe non-scary advice re cutting coves on the TS
by Howard In Toronto 5/2/11, 4:14 AM
7 Replies · 45 ViewsLast post 5/2/11, 6:18 PM by Tony - Memphis -
by Barry Irby 4/29/11, 11:36 PM
20 Replies · 39 ViewsLast post 5/2/11, 4:45 PM by paul in AZ -
Easter table project-exterior varnish evaluation
by Bill Tindall, E.TN. 5/2/11, 2:57 PM
1 Reply · 11 ViewsLast post 5/2/11, 3:55 PM by Jesse Cloud -
by Bill Tindall, E.TN. 4/30/11, 7:46 PM
12 Replies · 31 ViewsLast post 5/2/11, 4:00 AM by Bill Tindall, E.TN. -
by Larry in NW OHIO 4/29/11, 1:34 PM
3 Replies · 16 ViewsLast post 5/2/11, 3:50 AM by pete labelle -
by del schisler 5/2/11, 12:02 AM
1 Reply · 12 ViewsLast post 5/2/11, 3:01 AM by Barry Irby -
by friend2 4/30/11, 12:28 AM
4 Replies · 18 ViewsLast post 5/2/11, 1:45 AM by Steve Schoene -
by Jason Roehl in Lafayette, IN 5/1/11, 7:50 PM
0 Replies · 83 ViewsLast post 5/1/11, 7:50 PM by Jason Roehl in Lafayette, IN -
Way OT. I thought Bill and Kate were..............
by Ron Bauman 5/1/11, 3:28 PM
2 Replies · 13 ViewsLast post 5/1/11, 5:47 PM by Yonak -
Anybody used one of the electric/air nail guns?
by Barry Irby 4/30/11, 12:55 PM
10 Replies · 19 ViewsLast post 5/1/11, 4:49 PM by Larry in NW OHIO



