Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

OT, printing problem

Posts

OT, printing problem

#1

OT, printing problem

Robert R. Clough

When I hit Print and then enter I do not get printed. For some reason I then have the Documents screen come up and a note that a printing error has occurred! I can not remember where to go to fix that. Can any of you suggest where?

Re: OT, printing problem

#2

Re: OT, printing problem

Dave Bair, Eaton Rapids, MI

Can you provide the operating system (Windows or Mac) and the specific application you're using to access the Print function. Incidentally, I've never had an application where I clicked on the Print command and then had to hit Return to activate it.

Re: OT, printing problem

#3

Re: OT, printing problem

Bill Turpin in WNC mountains

Go to Control Panel, double click Printers, select the problem printer. Check to see if any info is proveded. Clear the queue of any documents to be printed. Make sure printer has AC power. Cartridges, if ink-jet, should move to the center. Instal and re-install cartridges several times.

Plug and re-plug BOTH ends of your printer cable several times to clean any corrosion.

Many printers now days will not function if any ink cartridge is empty. Is this possible? Many of them will tell you that. This info can get covered up if TOO many windows are open.

Create a one line document in word processor. Do a CONTROL-P. Hit ENTER. If it prints, it is fixed. :)

Re: OT, printing problem

#4

Re: OT, printing problem

Robert R. Clough

Thanks. Found and fixed.

Re: OT, printing problem

#5

Re: OT, printing problem

Bill Turpin in WNC mountains

What fixed it?

Re: OT, printing problem

#6

Re: OT, printing problem

Robert R. Clough

Very simple. I actually took the time to check out the "print" screen. I'm usually too impatient to do that. Anyway, where it shows the printer to be used, there is an arrrow. Ok, I clicked on that and found that my printer was NOT the printer checked to print. After I stopped banging my head on the wall (and scaring Tavi, our Cat)I clicked on the proper printer. Lo and behold, all is fixed. Why the printer changed, who knows - perhaps The Shadow knows, but I do not!