General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
White Oak Slab Bar Top..need help novice
by Tom Wootten 8/3/12, 6:10 PM
3 Replies · 21 ViewsLast post 8/4/12, 1:18 AM by Bill Tindall, E.TN. -
Router table build allmost done
by bob 8/2/12, 4:02 AM
11 Replies · 29 ViewsLast post 8/3/12, 6:38 PM by Jason Waters -
by mark Hennebury 7/30/12, 1:34 PM
16 Replies · 60 ViewsLast post 8/3/12, 3:03 PM by Larry Clinton At Frankfort, (Central) Indiana -
by Roger Myers 8/3/12, 10:54 AM
4 Replies · 34 ViewsLast post 8/3/12, 12:55 PM by Roger Myers -
router table i have-works for me
by del schisler 8/3/12, 12:51 PM
0 Replies · 32 ViewsLast post 8/3/12, 12:51 PM by del schisler -
Router table build allmost done
by Bob 8/1/12, 3:59 PM
4 Replies · 16 ViewsLast post 8/2/12, 4:10 AM by William Duffield -
Tung to be applied over linseed Oil
by Luke 7/31/12, 7:54 PM
9 Replies · 31 ViewsLast post 8/1/12, 8:07 PM by John in NM -
shop vac did not start sub fire 2
by Jerry Gibbs 7/24/12, 4:27 PM
30 Replies · 80 ViewsLast post 8/1/12, 7:29 PM by Greg -
by Larry in nw ohio 7/31/12, 2:18 PM
16 Replies · 24 ViewsLast post 8/1/12, 7:17 PM by Larry in nw ohio -
Plywood grain and shelves question?
by JL 7/29/12, 8:39 PM
5 Replies · 24 ViewsLast post 8/1/12, 5:58 PM by TomD -
by Joseph Mulherin, sr 7/31/12, 12:54 AM
1 Reply · 14 ViewsLast post 8/1/12, 11:33 AM by Joseph Mulherin, sr -
by Tom Rex in TX 7/19/12, 1:25 PM
19 Replies · 39 ViewsLast post 8/1/12, 4:32 AM by CJ in MPLS -
OT Which one of you did this? *LINK*
by Dustmaker Mike 7/31/12, 10:41 AM
7 Replies · 17 ViewsLast post 7/31/12, 8:31 PM by Mark Mandell -
by McKay 7/30/12, 7:20 PM
9 Replies · 51 ViewsLast post 7/31/12, 7:22 PM by Bill Tindall, E.TN. -
by Stephen Shepherd 7/31/12, 2:35 PM
0 Replies · 18 ViewsLast post 7/31/12, 2:35 PM by Stephen Shepherd -
by Ellis Walentine 7/26/12, 10:20 PM
15 Replies · 53 ViewsLast post 7/31/12, 11:41 AM by Mark Hennebury -
WC Weekend Accomplishments.....
by Dennis E Peacock 7/30/12, 12:40 PM
3 Replies · 19 ViewsLast post 7/30/12, 4:12 PM by George -
duck tape zero clearance insert
by Jerry Gibbs 7/28/12, 3:09 PM
9 Replies · 47 ViewsLast post 7/30/12, 4:00 PM by Jerry Gibbs -
So I bought an 18 volt PC set?????
by Barry Irby 7/28/12, 7:43 PM
9 Replies · 18 ViewsLast post 7/30/12, 3:53 PM by George -
finish for walnut with holly inlay
by Bill Tindall, E.TN. 7/29/12, 4:36 PM
10 Replies · 30 ViewsLast post 7/30/12, 2:26 PM by Larry Clinton At Frankfort, (Central) Indiana -
by Tony - Memphis 7/27/12, 7:31 PM
2 Replies · 12 ViewsLast post 7/30/12, 2:19 PM by A.J. Hamler -
by Bill Tindall, E.TN. 7/30/12, 1:49 AM
1 Reply · 22 ViewsLast post 7/30/12, 3:18 AM by Henry Higginbotham -
OT - Terminating CELL contract?
by David C. Lykins 7/27/12, 3:20 PM
5 Replies · 27 ViewsLast post 7/29/12, 10:27 PM by kurt -
by Woodie49 7/28/12, 5:07 PM
8 Replies · 19 ViewsLast post 7/29/12, 10:21 PM by Henry Higginbotham -
by joe 7/29/12, 12:53 PM
4 Replies · 13 ViewsLast post 7/29/12, 8:30 PM by Stuart Johnson -
by Chuck in Mtl. 7/27/12, 11:06 PM
13 Replies · 26 ViewsLast post 7/28/12, 6:39 PM by John McGaw -
Any value in old DW battery cases?
by Tom Dunlap 7/28/12, 6:20 PM
0 Replies · 21 ViewsLast post 7/28/12, 6:20 PM by Tom Dunlap -
by Barry Irby 7/27/12, 8:51 PM
8 Replies · 12 ViewsLast post 7/28/12, 3:27 PM by Barry Irby -
Porter Cable Dovetails jig for sale
by Barry Irby 7/27/12, 8:36 PM
2 Replies · 32 ViewsLast post 7/28/12, 2:52 PM by Ellis Walentine -
by John Lucas 7/27/12, 8:08 PM
1 Reply · 22 ViewsLast post 7/28/12, 11:54 AM by Bill Tindall, E.TN.



