Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Son's weekend accomplishments

Posts

Son's weekend accomplishments

#1

Son's weekend accomplishments

McKay

This is a desk that my son completed on Saturday. He mostly had to do this with one hand because his right hand was in a splint. When he was cutting w/ the chop saw, it bucked, and somehow knocked his right hand off of the handle. This caused the saw to cut through three tenons and break the bone in his thumb. He currently has three long pins holding the thumb bone together. He has no feeling on the top, but has feeling on the pad of the thumb. (very lucky) Looking at the situation, I do not understand how his hand could have left the handle and get cut. The guards are all intact.

Anyway, he learned how to use a #80 scraper and sand left handed.



End view



Here is a view of the hand made pulls. They look like finger bones. Gee, I wonder why?


Re: Son's weekend accomplishments

#2

Re: Son's weekend accomplishments

roger lance

So sorry to hear of your son's injury....he is lucky....and that is quite an accomplishment under the circumstances....I hope he heals quickly and completely.

Re: Son's weekend accomplishments

#3

JL

Re: Son's weekend accomplishments

JL

Looks great. Best wishes for a speedy recovery. Now explain how he cut himself again? If I'm cutting right handed and my hand leaves the saw trigger, it stops...

Re: Son's weekend accomplishments

#4

Re: Son's weekend accomplishments

Mark Hennebury

Hi,

Sorry to hear about your sons accident. Lets hope that he recovers well.

I would be interested to find out how exactly that happend.

Beautiful job, although i have concerns for the conflicting grain direction and wood movement causing this design to split as it appears to be solid wood.

All the best wishes for your son.

Re: Son's weekend accomplishments

#5

Kneale Brownson

What material in the pulls?  Nice job!!!


Re: Son's weekend accomplishments

#6

figured elm


Re: Son's weekend accomplishments

#7

Jl and Mark

McKay

I am not certain how it happened. I believe that the wood bound the blade causing the saw to buck. I think that it knocked his right hand off and probably bounced off of the top return and back into the hand. It was a clean cut although very deep. I taught woodworking for 31 years and never had anything like this happen. Of course, there were no chop saws for the first few years just RAS. The RAS scared me to death. I had a 16" Rockwell. Every time a student turned it on I would jump. I was worried to death that one of them would pull the saw into their hand. Never in a million years did I think that a chop saw could nail you like this one did. It is a fairly new Makita.

Re: Son's weekend accomplishments

#8

Re: Son's weekend accomplishments

mdclor

I wish your son a speedy and complete recovery. When I first got my SCMS it bucked and scared the stuffing out of me. I didn't know they could do that. I didn't use it again until it was securely bolted to a cabinet and it hasn't pulled that trick again.

It looks like he did a great job with the execution. I know how much fun through tenons can be. :)

I really like the A&C design elements. I hope we will see more completed projects from your un-named son.

Re: Son's weekend accomplishments

#9

Re: Son's weekend accomplishments

John Veerkamp

How old is your son. and what are all of the different woods.

Beautiful piece.

Re: Son's weekend accomplishments

#10

Thanks for both

Bill Tindall

I am normally not a fan of mixed wood but it certainly works in this attractive desk. Will you supply some additional construction and execution detail on the "through" legs.

And thanks for the accident report. These reports cause me to be more careful.