General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Barry Irby 3/23/19, 12:26 PM
18 Replies · 37 ViewsLast post 3/25/19, 11:25 PM by John in NM -
by Mike L 3/18/19, 10:49 PM
8 Replies · 70 ViewsLast post 3/25/19, 6:49 PM by Mike L -
by Bill Tindall, E.TN. 3/23/19, 1:52 PM
8 Replies · 43 ViewsLast post 3/25/19, 12:46 PM by Brian Holcombe -
by Roy 3/17/19, 11:58 PM
40 Replies · 102 ViewsLast post 3/24/19, 11:22 PM by Brian Holcombe -
Temporary Green Walnut Sapwood
by Don Stephan 3/22/19, 11:52 PM
5 Replies · 56 ViewsLast post 3/24/19, 7:55 PM by Don Stephan -
Screws into the edge of plywood
by Bill Houghton 3/24/19, 2:36 AM
5 Replies · 103 ViewsLast post 3/24/19, 3:28 PM by John McGaw -
by Bill Tindall, E.TN. 3/22/19, 9:47 PM
8 Replies · 25 ViewsLast post 3/24/19, 1:34 PM by Kneale Brownson -
Anyone use castors on work bench?
by Barry Irby 3/20/19, 2:52 PM
12 Replies · 58 ViewsLast post 3/23/19, 7:05 AM by AZ -
by Stuart Johnson 3/14/19, 1:31 PM
9 Replies · 29 ViewsLast post 3/22/19, 9:56 PM by Bill Tindall, E.TN. -
by Larry Edinger 3/22/19, 3:31 PM
3 Replies · 29 ViewsLast post 3/22/19, 8:08 PM by Kneale Brownson -
Bandsaw dust collection-the lazy solution
by Mark Nowicki 3/22/19, 2:07 AM
2 Replies · 29 ViewsLast post 3/22/19, 4:40 PM by Jim DeLaney, Austintown, Ohio -
Craftsman Radial and TS molding head
by Keith Newton 3/20/19, 11:22 PM
9 Replies · 122 ViewsLast post 3/22/19, 11:07 AM by Barry Irby -
by Barry Irby 3/18/19, 5:20 PM
3 Replies · 26 ViewsLast post 3/20/19, 7:53 PM by Hank Knight -
by Tom Norton 3/17/19, 7:07 PM
7 Replies · 74 ViewsLast post 3/20/19, 1:20 PM by Jerry Gibbs -
by Gary Smyth 3/17/19, 7:30 PM
11 Replies · 22 ViewsLast post 3/19/19, 2:45 PM by David Yoho -
by Jim in Burlington Ont. 3/18/19, 12:29 PM
1 Reply · 33 ViewsLast post 3/19/19, 1:11 AM by Lee Schierer in McKean, PA -
by Jerry Gibbs 3/17/19, 4:23 PM
6 Replies · 25 ViewsLast post 3/18/19, 9:28 PM by Don Evans -
by Don Stephan 3/17/19, 3:11 PM
14 Replies · 55 ViewsLast post 3/18/19, 8:56 PM by Sgian Dubh -
by Alan Young 3/15/19, 3:17 PM
3 Replies · 19 ViewsLast post 3/18/19, 5:15 PM by Alan Young -
by Barry Irby 3/12/19, 2:19 PM
10 Replies · 25 ViewsLast post 3/17/19, 4:37 AM by Thomas Dunlap -
Music Stand 2019 Finished (picture heavey)
by Alan Young 3/11/19, 3:07 PM
9 Replies · 139 ViewsLast post 3/17/19, 1:04 AM by Kneale Brownson -
by Ron Goldman 3/12/19, 2:54 AM
11 Replies · 35 ViewsLast post 3/16/19, 11:56 AM by A.J. Hamler -
Nephew want to "learn woodworking"...
by JL 3/14/19, 12:27 AM
12 Replies · 38 ViewsLast post 3/16/19, 1:13 AM by Jerry Gibbs -
Woodworking things to do in Philadelphia
by Bill Tindall, E.TN. 3/14/19, 12:20 AM
7 Replies · 96 ViewsLast post 3/15/19, 4:57 PM by Stephen Roth -
Woodworking related photos from my travels.
by Mark Nowicki 3/14/19, 1:48 AM
4 Replies · 23 ViewsLast post 3/14/19, 8:34 PM by Kevin French -
Anyone going to the Atlanta show tomorrow?
by Henry Higginbotham 3/14/19, 7:53 PM
0 Replies · 35 ViewsLast post 3/14/19, 7:53 PM by Henry Higginbotham -
Breaking down long lumber for projects
by Bill Tindall, E.TN. 3/11/19, 1:25 PM
10 Replies · 34 ViewsLast post 3/14/19, 12:15 PM by Kneale Brownson -
by Barry Irby 3/13/19, 10:36 PM
2 Replies · 19 ViewsLast post 3/14/19, 11:21 AM by Barry Irby -
by JL 3/8/19, 9:34 PM
10 Replies · 98 ViewsLast post 3/14/19, 12:17 AM by JL -
Lubricant for plunge router guide posts
by Bruce, a MN Galoot 3/11/19, 8:22 PM
15 Replies · 187 ViewsLast post 3/13/19, 10:52 PM by Kneale Brownson