General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by TomD 12/3/18, 4:15 AM
3 Replies · 21 ViewsLast post 12/5/18, 11:55 PM by AZ -
by Ronnie 12/5/18, 9:43 PM
2 Replies · 20 ViewsLast post 12/5/18, 9:59 PM by Ronnie -
by Tom Norton 12/5/18, 6:54 PM
3 Replies · 21 ViewsLast post 12/5/18, 7:30 PM by Tom Norton -
by Howie 12/1/18, 10:17 PM
23 Replies · 106 ViewsLast post 12/4/18, 5:31 PM by Barry Irby -
Old Boice Crane table saw jointer
by Mike in Zuni Va 12/2/18, 5:22 PM
2 Replies · 19 ViewsLast post 12/3/18, 10:30 PM by McKay -
by Bill Tindall, E.TN. 12/2/18, 1:45 PM
16 Replies · 68 ViewsLast post 12/3/18, 3:38 PM by Ellis Walentine -
by Joe 11/27/18, 5:46 PM
13 Replies · 31 ViewsLast post 12/3/18, 2:30 PM by Joe -
by Bill Tindall, E.TN. 11/30/18, 3:18 PM
6 Replies · 35 ViewsLast post 12/3/18, 12:00 PM by Barry Irby -
by Jerry Gibbs 11/28/18, 4:34 PM
18 Replies · 39 ViewsLast post 12/2/18, 6:49 PM by Larry Clinton At Frankfort, (Central) Indiana -
Christmas gift dilemma once again!
by Tom Norton 11/24/18, 1:10 PM
5 Replies · 24 ViewsLast post 12/2/18, 4:25 PM by Tom Pilsbury (Chicago) -
by Tom Norton 12/1/18, 10:04 PM
7 Replies · 30 ViewsLast post 12/2/18, 3:44 PM by Barry Irby -
by Bill Tindall, E.TN. 11/22/18, 9:37 PM
24 Replies · 207 ViewsLast post 12/2/18, 2:24 AM by Barry Irby -
Staining turned furniture parts
by Bill Tindall, E.TN. 12/1/18, 7:31 PM
1 Reply · 23 ViewsLast post 12/2/18, 1:08 AM by Don Stephan -
OT - Moisture meter for hay baler
by Terry Alexander 11/25/18, 6:19 PM
21 Replies · 84 ViewsLast post 12/2/18, 12:24 AM by PC -
Softening beeswax and old floor wax
by Don Stephan 12/1/18, 6:23 PM
3 Replies · 39 ViewsLast post 12/1/18, 8:25 PM by John K Jordan -
by Tom Norton 11/26/18, 11:27 PM
12 Replies · 42 ViewsLast post 12/1/18, 4:45 PM by Yape -
by Tom Norton 11/30/18, 8:05 PM
2 Replies · 29 ViewsLast post 12/1/18, 2:57 PM by Andy Lincoln in Dearborn,MI. -
Carpenter Bee Trsp- Another Winter Project!
by Tom Norton 11/27/18, 12:51 PM
15 Replies · 34 ViewsLast post 11/29/18, 2:34 PM by ebd -
Cold shop-Heated glue cabinet?
by Tom Norton 11/28/18, 4:10 PM
5 Replies · 35 ViewsLast post 11/28/18, 10:19 PM by Barry Irby -
by Bill Tindall, E.TN. 11/27/18, 2:35 AM
12 Replies · 93 ViewsLast post 11/28/18, 6:02 PM by Barry Irby -
OT-My snowblower upgrade worked!!!
by Tom Norton 11/27/18, 2:59 PM
6 Replies · 62 ViewsLast post 11/28/18, 4:08 PM by Tom Norton -
by Bobinak 11/21/18, 3:21 PM
20 Replies · 29 ViewsLast post 11/27/18, 3:30 PM by Henry (Raleigh NC) -
by Howie 11/24/18, 8:17 PM
14 Replies · 142 ViewsLast post 11/26/18, 10:49 PM by Kneale Brownson -
About that BLO under cherry...
by Joe 11/16/18, 1:59 PM
22 Replies · 338 ViewsLast post 11/26/18, 6:21 PM by Bill Tindall, E.TN. -
by Don Stephan 11/22/18, 11:40 PM
21 Replies · 64 ViewsLast post 11/26/18, 4:07 PM by Tom Dunlap -
by JL 11/19/18, 9:10 PM
5 Replies · 27 ViewsLast post 11/25/18, 3:57 AM by Alan Schaffter -
What would cause a table leaf to suddenly warp?
by Tim Greif - West of Chicago 11/18/18, 10:24 PM
21 Replies · 78 ViewsLast post 11/23/18, 12:59 PM by Sgian Dubh -
Happy Thanksgiving to Everyone
by Barry Irby 11/22/18, 11:57 AM
2 Replies · 24 ViewsLast post 11/23/18, 4:20 AM by Wood3rz -
LP engineered siding as trailer siding
by Tom Dunlap 11/22/18, 11:52 PM
0 Replies · 64 ViewsLast post 11/22/18, 11:52 PM by Tom Dunlap -
by Tom Norton 11/21/18, 5:33 PM
9 Replies · 24 ViewsLast post 11/22/18, 6:24 PM by Bill Howatt