Turning
Lathe work, tools, techniques, projects.
Related: Turning archive
Topic list
-
TopicStatisticsLast post
-
McNaughton Coring Tool Issue - Little long
by Brodie Brickey - Long Beach, CA 8/29/05, 4:03 PM
8 Replies · 19 ViewsLast post 8/29/05, 11:06 PM by Brodie Brickey - Long Beach, CA -
by Don Rhodes 8/28/05, 6:51 PM
5 Replies · 14 ViewsLast post 8/29/05, 10:24 PM by Don Rhodes -
by Ed Davidson 8/29/05, 3:10 AM
5 Replies · 11 ViewsLast post 8/29/05, 7:43 PM by Ed Davidson -
by eaglesc 8/29/05, 2:46 PM
1 Reply · 6 ViewsLast post 8/29/05, 4:06 PM by Brodie Brickey - Long Beach, CA -
by Carole in VA 8/28/05, 6:17 PM
17 Replies · 42 ViewsLast post 8/29/05, 3:06 PM by Don Orr -
by Dustmaker Mike 8/28/05, 3:11 PM
5 Replies · 22 ViewsLast post 8/29/05, 1:54 PM by Dustmaker Mike -
by Russ Fairfield 8/27/05, 10:37 PM
4 Replies · 18 ViewsLast post 8/29/05, 12:35 PM by Ron in Drums PA -
by Ed Moore 8/28/05, 6:57 PM
2 Replies · 21 ViewsLast post 8/29/05, 12:31 PM by Ed Moore -
by David Yoho 8/29/05, 12:01 PM
0 Replies · 21 ViewsLast post 8/29/05, 12:01 PM by David Yoho -
by Ruth Niles 8/28/05, 3:37 PM
2 Replies · 29 ViewsLast post 8/29/05, 11:36 AM by oldgriz -
by Mike Schwing from Md. 8/29/05, 12:42 AM
9 Replies · 21 ViewsLast post 8/29/05, 11:35 AM by Mike Schwing from Md. -
cost of Lathe for $15 (so far)
by Ned Bulken 8/27/05, 9:30 AM
9 Replies · 35 ViewsLast post 8/29/05, 9:39 AM by Ned Bulken -
Speaking of toolrest height...
by Russ Fairfield 8/27/05, 5:31 AM
6 Replies · 17 ViewsLast post 8/28/05, 11:08 PM by Wes Jones -
by John Lucas 8/28/05, 4:06 PM
9 Replies · 49 ViewsLast post 8/28/05, 6:18 PM by John Lucas -
by John Lucas 8/27/05, 2:07 AM
6 Replies · 25 ViewsLast post 8/28/05, 5:52 PM by Brad Vietje -
by Keith Tompkins 8/27/05, 2:11 AM
5 Replies · 10 ViewsLast post 8/28/05, 5:43 PM by Brad Vietje -
another vase in copaiba"Bibis#3
by Eduardo Sarmiento Hall-Lima Peru 8/27/05, 7:04 PM
5 Replies · 43 ViewsLast post 8/28/05, 3:34 PM by Eduardo Sarmiento Hall-Lima Peru -
by tdaniel 8/27/05, 3:46 AM
10 Replies · 19 ViewsLast post 8/28/05, 3:33 PM by tdaniel -
by Kevin Turner 8/28/05, 2:26 AM
11 Replies · 29 ViewsLast post 8/28/05, 3:15 PM by Russ Fairfield -
Interpreting what we see in the wood?
by Keith Newton 8/28/05, 4:00 AM
4 Replies · 35 ViewsLast post 8/28/05, 2:55 PM by Keith Tompkins -
by Kudzu 8/27/05, 11:49 PM
3 Replies · 19 ViewsLast post 8/28/05, 2:44 PM by Ed Moore -
Powermatic 3520A Tailstock Question
by Clem Wixted 8/28/05, 12:31 AM
2 Replies · 18 ViewsLast post 8/28/05, 12:04 PM by Clem Wixted -
Help finding thread adapter for older Rockwell
by Wayne Leach 8/26/05, 3:36 AM
6 Replies · 16 ViewsLast post 8/28/05, 1:55 AM by Wayne Leach -
by Gary Evans Tallassee, TN 8/27/05, 9:29 PM
3 Replies · 16 ViewsLast post 8/28/05, 12:37 AM by Gary Evans Tallassee, TN -
by Sean Troy 8/27/05, 7:02 PM
6 Replies · 18 ViewsLast post 8/28/05, 12:15 AM by Sean Troy -
by Wayne Leach 8/27/05, 11:20 PM
1 Reply · 15 ViewsLast post 8/28/05, 12:02 AM by Carole in VA -
Bowl profile per Carole in VA request
by Wayne Leach 8/27/05, 11:18 PM
0 Replies · 15 ViewsLast post 8/27/05, 11:18 PM by Wayne Leach -
by Eduardo Sarmiento Hall-Lima Peru 8/27/05, 7:05 PM
0 Replies · 17 ViewsLast post 8/27/05, 7:05 PM by Eduardo Sarmiento Hall-Lima Peru -
Better explanation for other newbies
by Carole in VA 8/27/05, 12:40 AM
8 Replies · 28 ViewsLast post 8/27/05, 3:53 PM by Carole in VA -
by eaglesc 8/27/05, 3:41 AM
2 Replies · 10 ViewsLast post 8/27/05, 11:27 AM by John Lucas



