Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

cost of Lathe for $15 (so far)

Posts

cost of Lathe for $15 (so far)

#1

cost of Lathe for $15 (so far)

Ned Bulken

>I'm going to take the plunge, my shop partner and I are going to resurrect an old craftsman single tube, 70's vintage, which we picked up at a club auction for $15, sans motor. I just got a call from a buddy who has a craftsman motor of similar vintage, which we can get for free! We will thus have a complete older model lathe for $25 including a new drive belt. It won't be a whiz bang new model, but it will suffice to learn on ,and I'll be able to afford decent turning tools and a grinder instead.

Incidentally, I've been enjoying reading the turning articles in the archives, which have spurred on my interest!

Re: cost of Lathe for $15 (so far)

#2

Re: cost of Lathe for $15 (so far)

John Lucas

>Wow that's cool. A lot of people have turned a lot of things on those lathes. I got some tools from an older Black man who had turned thousands of bowls on one of those lathes. He did put a jackshaft on to reduce the speed. He was a classic example of turn with what you've got. Not the I've gotta have this attitude we all have today. His lathe was on a beat up wooded stand. He used carbon steel tools. His workshop only had one lightbulb hanging from the ceiling and was probably only 8x8' He had an amazing amount of wooden blanks, roughed out bowls and other turnings piled in the corner. His wife made quilts and they sold them all at low end craft shows and flea mkts. Nice guy.

Re: cost of Lathe for $15 (so far)

#3

Keith Tompkins

Re: cost of Lathe for $15 (so far)

Keith Tompkins

>A while back, a tube lathe was the only thing I had, as I had sold the entire contents of my cabinet shop. My wife picked it up at a yard sale; it rekindled my woodworking after a 20 year absence. I still have it.

Re: cost of Lathe for $15 (so far)

#4

Re: cost of Lathe for $15 (so far)

Kudzu

>Good for you Ned. On another forum I was one of (maybe the only one) that said if you could get it going cheap enough then do it. I have a craftsman like that I learned on. Turned many bowls on it. Not a great lathe but a great lathe to learn on.

Matter of fact I am just about to pull my Craftsman tube lathe out of the shop. I am finally going to unload my new one and I need the space it is taking up.

Re: cost of Lathe for $15 (so far)

#5

That $15

Mark Mandell - Gone Round In Jersey

>Is going to be the single most expensive "investment" you have ever made. You will, however, remember it fondly as you continue to add 0's to your "balance sheet."

[Welcome to the Land of Charybdis]

Re: cost of Lathe for $15 (so far)

#6

Re: cost of Lathe for $15 (so far)

Ned Bulken

>Thanks guys,

I remember as a teenager, when I first caught the woodworking bug, my cousin ,whose shop I could occasionally putter in, had a metalworking lathe, but I never did anything with that lathe though. Instead I would bug my folks for a Shopsmith. Of course, perhaps the 'best' thing the shopsmith does is function as a Lathe. I was fascinated by the ability to make those shapes appear out of a block of wood. Now, I will finally try my hand at it.

I was seriously weighing all the options, but in the end, we Have a Lathe, and it will be a learning experience to get it up and going, and start turning. If (when) I really catch the 'bug' and my turnings sell, it will earn its own companion. Or at least that's what I Hope will happen.

Again, thanks for the encouragement.

Re: cost of Lathe for $15 (so far)

#7

Re: cost of Lathe for $15 (so far)

JamieDonaldson

>Mark is dead right about what that old Craftsman will cost over time. I remember it well, my 1st lathe, now 7 lathes ago!!!LOL,LOL!!!!

Re: cost of Lathe for $15 (so far)

#8

Re: cost of Lathe for $15 (so far)

Ned Bulken

>oh i have NO doubt I'll be spending loads more than that down the road. This way at least I'll have a good place to start. Now, about tools... starter set from Penn state is looking mighty good.

Re: cost of Lathe for $15 (so far)

#9

Re: cost of Lathe for $15 (so far)

Wes Jones

>Ned,

I take it that you are new to woodturning. I highly recommend that you find a club to visit and eventually join. There is no substitute for seeing someone demonstrate a particular technique or the proper way to use a tool. Joining a club will save you a lot of money in the long run and get you started on your new hobby right.

Wes Jones

Re: cost of Lathe for $15 (so far)

#10

Re: cost of Lathe for $15 (so far)

Ned Bulken

>Wes, my shop partner has done turning in the past, on a similar lathe to the one we're rehabbing. I expect I'll get the basics, and figure the rest out as we go. The only local turning club... meets on nights that I work unfortunately.