General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Chuck Jurvelin 6/10/19, 7:15 PM
16 Replies · 57 ViewsLast post 6/14/19, 3:32 PM by Stephen Roth -
A Steel Primer by Crucible Products, LLC
by Bill Tindall, E.TN. 6/14/19, 12:45 PM
0 Replies · 45 ViewsLast post 6/14/19, 12:45 PM by Bill Tindall, E.TN. -
Anybody familiar with Wilksboro, NC?
by Bill Tindall, E.TN. 6/12/19, 10:33 PM
0 Replies · 90 ViewsLast post 6/12/19, 10:33 PM by Bill Tindall, E.TN. -
The Harlequin side table: fine dados/housings
by Derek Cohen (in Perth, Australia) 6/10/19, 3:18 PM
2 Replies · 31 ViewsLast post 6/12/19, 3:07 PM by Derek Cohen (in Perth, Australia) -
by Howie 6/11/19, 11:44 PM
5 Replies · 34 ViewsLast post 6/12/19, 2:41 PM by Mark Mandell -
Completely OT...Samsung Ice maker question
by Barry Irby 6/10/19, 10:40 PM
12 Replies · 43 ViewsLast post 6/12/19, 1:52 PM by Kneale Brownson -
by Bill Tindall, E.TN. 6/10/19, 2:44 PM
10 Replies · 29 ViewsLast post 6/11/19, 3:15 PM by Ellis Walentine -
Follow up: new type of treated wood
by Bill Tindall, E.TN. 6/4/19, 7:26 PM
22 Replies · 43 ViewsLast post 6/11/19, 2:32 PM by Kneale Brownson -
by Stuart Johnson 6/10/19, 5:36 PM
4 Replies · 24 ViewsLast post 6/10/19, 11:56 PM by Dave Bair -
Shortening a narrow sanding belt
by CharlieL 6/7/19, 8:22 PM
12 Replies · 59 ViewsLast post 6/10/19, 3:40 PM by E Phillip Smith -
OT Ram 3.0L V6 eco-diesel in pickup truck
by AZ 6/9/19, 2:06 AM
11 Replies · 57 ViewsLast post 6/10/19, 3:05 PM by John in NM -
DC Thermal overload protector on the fritz.
by Barry Irby 6/7/19, 3:19 PM
6 Replies · 24 ViewsLast post 6/10/19, 12:16 PM by Barry Irby -
by JohnV 6/5/19, 2:41 AM
7 Replies · 27 ViewsLast post 6/9/19, 8:16 PM by Michael van pelt -
by Bill Tindall, E.TN. 6/7/19, 2:46 PM
6 Replies · 27 ViewsLast post 6/8/19, 9:48 PM by Bruce, a MN Galoot -
by Brian Chitwood 6/6/19, 6:55 PM
10 Replies · 30 ViewsLast post 6/8/19, 2:15 PM by Kneale Brownson -
by Derek Cohen (in Perth, Australia) 6/2/19, 1:40 PM
11 Replies · 27 ViewsLast post 6/6/19, 3:32 PM by Clint Searl -
by Bill Tindall, E.TN. 5/28/19, 9:59 PM
13 Replies · 67 ViewsLast post 6/5/19, 3:32 AM by Tom Colligan -
kitchen cabinet doors - Continued
by Howie 6/3/19, 10:32 PM
8 Replies · 29 ViewsLast post 6/4/19, 9:17 PM by Dick Coers -
Improving the shape of the Lee Valley Chisel 2
by Bill Tindall, E.TN. 5/29/19, 12:32 PM
40 Replies · 101 ViewsLast post 6/4/19, 3:39 AM by david weaver -
technical veeneering application question
by Bill Tindall, E.TN. 6/1/19, 5:57 PM
10 Replies · 48 ViewsLast post 6/3/19, 7:45 PM by TomD -
Harlequin side table - part 2: rebates and dados
by Derek Cohen (in Perth, Australia) 6/3/19, 3:30 PM
0 Replies · 59 ViewsLast post 6/3/19, 3:30 PM by Derek Cohen (in Perth, Australia) -
Ordered Shinwa....thanks to all
by Bill Tindall, E.TN. 6/1/19, 3:13 PM
5 Replies · 22 ViewsLast post 6/2/19, 1:36 PM by Jim DeLaney, Austintown, Ohio -
OT: Antique Truck Restoration Forum?
by Don Stephan 6/1/19, 8:46 PM
1 Reply · 37 ViewsLast post 6/1/19, 9:20 PM by Jack Guzman from Maine -
by Bill Tindall, E.TN. 5/31/19, 4:09 PM
20 Replies · 39 ViewsLast post 6/1/19, 2:07 PM by ebd -
by Bill Tindall, E.TN. 5/31/19, 12:40 PM
1 Reply · 26 ViewsLast post 5/31/19, 2:08 PM by Kneale Brownson -
by Kneale Brownson 5/27/19, 1:22 PM
26 Replies · 154 ViewsLast post 5/29/19, 11:41 PM by Kneale Brownson -
Veneering New Kitchen Can Doors
by Howie 5/28/19, 6:42 PM
5 Replies · 21 ViewsLast post 5/29/19, 2:18 AM by Dick Coers -
by Bill Tindall, E.TN. 5/21/19, 1:16 AM
21 Replies · 45 ViewsLast post 5/28/19, 2:55 PM by david weaver -
by john lucas 5/22/19, 9:00 PM
15 Replies · 36 ViewsLast post 5/27/19, 1:26 PM by Kneale Brownson -
OT - Problem with Audi Air Conditioner
by Ralph Lipeles 5/24/19, 2:13 PM
9 Replies · 65 ViewsLast post 5/26/19, 1:27 PM by Charles