Pic of the stone
David Weaver
Knowledge You Can Build On — Est. 1998
Pic of the stone
David Weaver
pic of the oxide
David Weaver
not available from hand american last time I checked 

the stone..
David Weaver
gray with slurry on top of it, but
white without it.
note the gray color of the slurry rather than black.
A useful tip if you're ever looking at japanese natural stones is the color and quantity of slurry on the picture of the stone as it's demonstrated. If the slurry is dark black and there's a lot of it, the odds are better for it being a good stone and reasonably fine than a stone where the slurry is kind of the color of the stone and a little gray (that usually signifies that the stone can't be used well without slurry, or more often that it generates a sloppy slurry just from use, and it'll never work finely).
pic of the stones
David Weaver
the fat one is the coarse one, I keep the slurry on both.
It's popular now to use a slurry stone with a coticule, which is just a small piece that you rub on the surface to generate a slurry - I'd rather just save the slurry. 
pic of the stone
David Weaver
Top is a bit boring white, but the sides show the thickness of the stone filled with blue renge, which is what made it expensive (I got it on a straight up auction, so I wasn't the only person interested in it at the price - not sure if that means it's OK to spend a lot, or someone else is as dumb as me).

pic of the dursol
David Weaver
picture of the compound
David Weaver
Just the bar - the box is long gone.
This compound is softer and darker green than most green bars.

pic of the stone
David Weaver
This stone has a light gray spot running through it, which made it a second, which made it affordable. The gray spot has no pores, so it doesn't affect use. Dan's seconds are better than other sellers' firsts, at least when bought from the website.
It's been hard to get them, though, and the price has gone from being 2/3rds or so of firsts to a lot close.
This is a great stone, as good as any black stone I've ever seen and finer than most.

(I managed to haggle with a retailer and get a giant 10x3 of one of these first quality for a little bit of a discount for razors but have to admit I haven't used it much - arkansas stones' pressure sensitivity makes them a great razor stone).
pic of the stone
David Weaver
note the characteristic bands. These stones have inclusions in them unlike most arkansas stones. They have sort of a flakey look, but don't break unless abused.

Re: Another White Alundum Japanese Stone
David Weaver
The look of the finer stone - it's shiny around the sides and back. No clue what it is, but it's a keeper.
dark black slurry dried on the surface - strong cutter that doesn't need much for loose particles moving around on it.
Jackson Lea 5 micron "yellowcake" on softwood
David Weaver
We saw the coarse picture of this stuff on corian already. It's brutal on a hard surface and raises a fat wire edge.
On softwood with a drop of oil or WD 40, it's fast, and entirely usable as a fine stone.

Fast, easily usable as a fine stone. Odd scratches are from doing some of the work in circles. At this magnification, the arcs of the circles just look like a bunch of little straight lines, but it's circles.
If this is used on a tool back and the bevel is buffed, it's still extremely bright mirror and very sharp.
picture of the wax bar
David Weaver
Pic of the filthy bar.

Is poplar soft enough
Bruce, a MN Galoot
to qualify as soft wood?
Re: Is poplar soft enough
David Weaver
absolutely, even yellow pine, which behaves more like half soft wood with bars of half hardwood between them (as in, it's not ideal) works well for this. Even cherry would be fine.
The hard bars in yellow pine probably make the big scratches more aggressive, without even considering that my buffing bar is filthy and could have metal pieces on it (something the buffer doesn't care about, but a hardwood lap would).
Re: Llyn Idwall
Rafael
Do you have any Charnley Forest stones?
Re: Llyn Idwall
David Weaver
Not any longer. I had several over the course of the last 15 years, but they always seem like a softer composition fine arkansas stones and I couldn't find any that worked finer than a trans or good black arkansas stone for razors or tools.
They vary some (some are softer than others), and can be a pain if you get one that's all green with no red streaks (the green ones with some darker dots are generally just as good, but people expect them to be a green with reddish streaks for visual confirmation).
I like idwalls a little better, and they're also cheaper to boot.
Charnley Forest
Rafael
I like them because of how they were formed, a long time ago at the bottom of an ancient ocean.
The one I have is typical, it's not as hard as an Arkansas. When using it it sometimes releases a particle that causes a scratch on the stone. I've a Welsh slate that scratches in a similar way.
releasing particles
David Weaver
A soft light green charnley that I had would do that - release the odd particle here or there and scuff the stone. Almost forgot about that.
I used the others for razors, and razors never put enough pressure on the surface to pull those loose.
Large halls black arkansas that I had would do that, too. You bear down on it to finish a tool and it would release an edge chipper. Not all the time, but enough that you couldn't trust it.
Sigma Power 13k
David Weaver
A fine, soft and slow finishing hone. But it's intended to be fine (grit rating is 0.73 micron and it's a softer feel than the shapton 30 k and may match the latter in actual fineness at the edge. It's certainly going to be more forgiving if a contaminant ends up on the stone).
It's soft enough that if you're not used to using waterstones pull only and slip just a little, it'll gouge deeply.
Slow enough that I'd only consider it for microbevel type work or stepping up the work from a prefinisher/finisher (not from a medium stone over a large surface).
Thirsty and kind of a pain (benefits from a soak, which means planning ahead if used on a larger surface), also - good at what it does but works only in a tiny narrow range. If nothing else, it's a good option to avoid spending what shapton wants for the 30k.
The picture looks great, but don't let it fool you - it takes the stone a minute to create this finish after a prefinish stone on the back of an iron, and that's a solid minute with spraying more water on the surface of the stone. If you had a rigged setup where it would work on a small part of a blade on a pull stroke, it would do nice work.
twice as fine as a shapton cream, but much less usable.

Pic of the stone
David Weaver
I got this stone without a base and added the wooden base to stabilize it. One of the corners cracked off in transit from japan (it's overall a soft stone)
Re: Sigma Power 13k
Curt Putnam
Is that the same as the Sigma Power Select II 13K stone? I think that is what I have (Stu's famous 3 stone package of 1, 6 13K stones). The one I have seems to work very well as a splash and go stone. Have no idea what the finish looks like under a scope.
Re: Sigma Power 13k
David Weaver
Same one. Could be my lack of familiarity with exactly what it likes.
Re: Sigma Power 13k
Wiley Horne
I like the stone a lot, soft and all. It does require continuous spraying to keep it wet while I’m using it. Don’t consider that a problem. Other Sigma’s also require lotsa spraying, in my hands.
Wiley
Re: Sigma Power 13k
David Weaver
curious, when you splash water on your, does it immediately go into the stone, or does it last for a few minutes?
Re: Sigma Power 13k
Wiley Horne
Gonzo. Gotta respray.
Wiley