DVR XP and Jet Mini VS
Ron McKinley
>
Knowledge You Can Build On — Est. 1998
DVR XP and Jet Mini VS
Ron McKinley
>
Nova DVR XP, Delta Millwalkee 12X48
Dave Belser
>
Re: Lathes
Earl Kennedy
>3520a PM and happy with it big time.Best lathe for the money.
Re: Lathes
John Lucas
>Powermatic 2035A, Nova Comet Mini lathe, 2 jet mini lathes, Carbo-tec mini lathe, 1 no name angle iron mini lathe, Dremel mini lathe, 1 spring pole lathe, 1 mini metal lathe, and I'm finishing 1 treadle lathe. I've really got to get rid of some of these.
General 260 and Conover
Jake (SoMN)
>
Re: Lathes
don in central IL
>John,
I could 'store' your Powermatic for you. At NO COST!!!! Just let me know when to pick it up, it'll give you a lot more room. Just tyring to be helpful.
General Maxi
Gil Jones
>
Nova 3K Non-VS
Stuart Johnson
>
Oneway 1016,Jet Mini,Robust 25x28 (Soooon)
Ed Moore
>
Re: Jet 1642 EVS 1.5 hp (and a Delta 742)
JL
>
Delta X5 46-755X and HF 34706
Wilford Bickel
>HF unit got me going and is now a great buffing machine. Love my Delta X5.
Oneway 2436,Powernatic 3520a,Jet Mini
Gary in Zirconia, NC
>
Grizzly G0462
Ray Carson, New Jersey
>
Nova DVR and Jet Mini
Carole Valentine
>
Jet 1236 -- good enough for now
GaryG in MD
>
Karle Spinshop
Ken Grunke from SW WI
>Shorter than a Jet mini, but weighs about 3 times more.
Originally a metal-spinning lathe (still can be) with an odd spindle size which I had machined to 1 x 8 tpi. Tailstock is on the floor--I machined a new ram for it when I purchased a metal lathe soon after getting this. It's got a 12" swing over gap, 8" over bed, and about 13" length capacity.
I had a Jet 1236 being stored in my shop, and it was parked near an outlet, but that went out the door to it's owner's shop recently so it's back to Old Greeny.
Vicmarc VL300 which replaced Nova 3K
david
>
Re: Lathes Jet 1236
Tom Libby
>
Re: Lathes: Robust 25x28 and a Jet Mini
Phil Powell
>
General 26020 + Jet Mini but ...........
Ruth Niles
>if you are using the old monotube Craftsman, keep it as a spare if you ever decide to upgrade. I am SO sorry I sold mine, I used it for 10 years before The General.
Re: General 26020 + Jet Mini but ...........
Keith Tompkins
>Same here, General 26020, plus some antique lathes in the process of restoration.
Stubby S500 & Jet mini VS
Mark Wollschlager
>
Old Delta 1236, Jet Mini and Oneway 2436
Paul Porter
>
General 26020VD
adrien
>
Nova 3000 DC VariableSpeed
tek-Brunswick, Ohio
>