General 260-20
Juergen
>
Knowledge You Can Build On — Est. 1998
General 260-20
Juergen
>
Re: JET 1642EVS and JET MINI
William Duffield, on the Cohansey
>and I used to have a JET 1236. There are several others, without brand names or product numbers, I also have access to and have turned on. They're all fun!
PM3520a, DeltaMidi, Homemade oak(first one)
Mike Nelson
>
Nichols Custom Built....
Wally Dickerman
>My Nichols is a "lefty". LH threads, headstock on my right. It weighs 800 pounds. It has a reservoir for sand. I have had 400 pounds of sand in it and it wasn't half full. It swings 26 inches. I can raise four very heavy duty leveling jacks and it's on wheels.
Wally
Re: Lathes Woodfast both long and short bed
Dinyar Chavda
>I haven't checked into it, but Neil Scobie mentioned in passing that Woodfast was again making lathes.
My lathes
Dave Peebles Lyons, Ohio!
>Hello John,
I have had several over the years. Right now I have the Oneway 2436 and Jet mini, a homemade Bowl lathe, and my late Father in laws Delta Homecraft. I keep that one just for the memories of my FIL.
I also had a really nice Boice-Crane lathe that I recently sold to a friend of mine. It was my first lathe. The great thing about it was the distance between centers... 42" It was perfect for the Shaker Rockings chairs I used to make.
Great question!! It is really interesting to see what everyone is turning on.
Best wishes,
Dave
Re: Lathes
chris rolke
>i have 3
craftsman round tube
jet 1236
jet mini
Grizzly G0462
Wayne Kuhn
>
!946 vintage Delta & Nova 3K
ebd
>
How about giving pros and cons
Brian McInturff in SC
>This has been great seeing what everyone has. Since I'm looking at upgrading to a more Heavy Duty lathe how about giving your own Pros and Cons of your lathe. Especially those with the Powermatics, Stubbys, Oneways, Vicmarcs and Robust. These are the ones that I've been looking at.I'm still several months from the actual purchase but it takes time to make the decision I turn bowls and would like to get into true hollow forms which I just can't do on my Oneway 1018. The kicker here is my shop is only 12x16 but I can dedicate another 12x16 building just for my lathe, wood and accessories. Turning on each of these isn't something I'll be able to do(some I can) but even then I know I won't spot all the inconveniences that may arise from use over time. So, here's a chance to really brag about your lathe and or talk about the problems you wished weren't there. Thanks and yes I continue to research the various archives.
Brian McInturff in Myrtle Beach, SC
Poolewood Euro 2000 & Mercury Mini
David Propst, Valdese, NC
>
Older Rockwell and Jet mini
Wayne Leach-NW Ontario
>
Re: Lathes
Rick Bane
>I started out with a Rigid lathe. I now have a delta 14 inch lathe, with all the goodies(oneway chuck, oneway live center, termite, etc) and I'm very happy with all of them. Maybe someday I will upgrade to a oneway lathe.
Rick
Re: Grizz 1067Z. NM
Bill White
>
Stubby S750 and Vicmarc VL100
Joe Flemig
>
PM3520B, Oneway 12-24 and JET Mini VS...NM
Ed Davidson (Colorado Springs)
>NM
Re: Lathes
Bill Blasic
>Nova DVR3000, Rikon Mini. Delta Mini, 1904 Oliver, 1950 Delta, and a Craftsman 15" VS.
Jet 1236
Nick Tuzzolino
>
No One Else Will But I Will Admit To A HF34706
George (Oxford, NC)
>Relatively new to turning (9 months), and so far it has served me well. Maybe someday when I when a lottery, I will upgrade.
George
I'll admit it...
LT
>George,
...the HF 3407 was my first lathe. Turned on it for over two years...served me well with no problems. Recently upgraded to a PM3520B
LT
Re: How about giving pros and cons
Bob Fawcett
>I have a PM3520b. The only con I can think of is space between the headstock and your turning. Sometimes I wish for more. I could easily fix this with an extension for the spindle. It must not be that bad, because I haven't bought an extension.
On the Pro side. 20" swing - large enough for nearly anything I might want to do. Plenty of power. I love the variable speed. All controls and adjustments are convenient. I have the 18" bed extension. I can use it for longer spindles, and I can mount it lower on the legs, slide the headstock to the other end of the lathe, and turn a bowl 36" if I can find wood that large. It weighs nearly 700lbs and is quite stable.
Oh yeah, and it survived the "drop test" when I picked it up.
Interesting how many Jet Minis...
Bob Fawcett
>are listed, and I didn't read a single post that said "I used to have a Jet Mini".
Re: D.I.D. Pro 4
Ronny Eelen (Belgium)
>
Re: D.I.D. Pro 4
David Galloway
>I have my first lathe, a Conover that I built to do what Ed Moulthrop was teaching me to do....big vessels. The great thing about the Conover system was that you could do just about anything in terms of configuration.
Later I bought on the the original Powermatic 3520, which is my main horse. And I bought a Jet Mini for grins.
Brian, I can comment on one that you listed
TDaniel
>I have a Vicmarc VL300, Australian version. Be aware that Craft Supplies sells their version of the VL300 and it is not the same lathe. The Australian version is much better and heavier and has a better variable speed power unit. It also has a larger toolrest post but that isn't a factor because to ever be happy with this lathe you will want to remove the banjo and toolrest and replace it with a One-way. Once I finally coughed up the bucks to replace the lousy banjo and toolrest I now feel I have one of the best lathes available; of course the colors no longer match but what the heck, it works now. I am near you so drop in and take it for a test drive if you want.