Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Lathes

Posts

Re: Lathes

#51

Re: Lathes

bob davis

>with this info ,it should be easy to decide

Re: Lathes

#52

Re: Lathes

bob davis

>with this info ,it should be easy to decide

Re: Lathes

#53

Powercraft, Fisch & custom bowl lathe...

dwr

>... with a 95" swing, VFD, 5hp Leeson, etc... nearing completion.

Re: Lathes

#54

Jet 1642 and Jet Mini

Scott Hurley in N. VA

>

Re: Lathes

#55

Re: Lathes *LINK*

Darrell Feltmate

>I have the 15" Craftsman variable speed

a Canadian Tire monotube

a Canadian Tire mini

a Record bowl lathe

I like them all.


Around the Woods

Re: Lathes

#56

Nova 3000

Jorge Castaneda

>And aching for bigger and better, dreaming of PM 3520

Re: Lathes

#57

General International 16" swing x 42" between

Greg Haugen

>I have a Gen. Int. It has a 1 1/2 horse which is enough for this lathe. Someday I'll get a VL300 Vicmarc, that's my dream lathe.

Greg

Re: Lathes

#58

Re: Lathes

Thad

>I have an old Magna wood lathe...not a shopsmith, just the lathe. It has the production plate with model and serial#, but I cannot find any information about the thing anywhere. Everything I've read indicates Magna never produced a lathe, but what I have in my garage seems to offer evidence to the contrary. regardless, it seems to be an adequate first lathe.

If anyone knows anything about this lathe feel free to educate me.

turning pecan this week

~ thad

Re: Lathes

#59

Vicmarc VL300

CJ

>

Re: Lathes

#60

Re: Lathes

Allen Neighbors

>Grizzly 5979 12x36 and a Oneway 1640.

Us'em both. Love the Oneway!!

Allen

Re: Lathes

#61

Two Vicmarcs

Mike Cunningham (Cape May NJ)

>VL-300 3 HP Shortbed and a VL-100 mini which was Rude Osolnik's. Love them both but should have bought the long bed.

Re: Lathes

#62

Oneway 2436, Vic 200, Jet mini vs and an old atlas

Bill Hale / Woodspinner

>

Re: Lathes

#63

Dick Hines

Re: Lathes

Dick Hines

>PM3520A and a Jet mini

Re: Lathes

#64

Oneway2436,Delta Midi & Rockwell Hmcrft

Mike Brazeau

>

Re: Lathes

#65

PM3520A, Jet Mini VS, Jet Mini.

Ed Karch

>

Re: Lathes

#66

Conover, Jet Mini, Craftsman mono-tube

Brian Hahn in SW Wisconsin

>

Re: Lathes

#67

Re: Conover, Jet Mini, Craftsman mono-tube

tm

>craftsman 15 inch vs

and a jet mini still in the box for the next time the craftsman wanks me.

Re: Lathes

#68

Oneway 2436 and 1224, 2 WIlton pen lathes

Peter Teubel

>

Re: Lathes

#69

Jet Mini

Mike Rubes, Apex, NC

>

Re: Lathes

#70

Conover lathe

Jake Niedling

>

Re: Lathes

#71

General 26020 + Jet Mini here too

Jennifer@Indy.USA

>

Re: Lathes

#72

1954 Delta Rockwell

Raymond Overman in SC

>

Re: Lathes

#73

Re: Harrison Union Jubilee

Merv in BC

>I picked up a Harrison at an auction I like it because of its weifht and size. It is 50 yrs old has had the sleeve bearings changed to ball and has had the motor changed to DC. No plan on changing it regardless of how much I like the oneway and the stubby

Re: Lathes

#74

Stubby 750 & Jet Mini

Barry Turner

>

Re: Lathes

#75

VL300 shorty bed NM

gtwilkins

>