Lathes
john vitosky
>I am just curious as to what lathes everyone has? I have a craftsman that I have been pleased with. Bought it for $125. Will upgrade someday but having fun on this one. So what have you got?
Knowledge You Can Build On — Est. 1998
Lathes
john vitosky
>I am just curious as to what lathes everyone has? I have a craftsman that I have been pleased with. Bought it for $125. Will upgrade someday but having fun on this one. So what have you got?
PM 3520B
DougJ in Crawfordsville, IN
>
Oneway1640
Barbara Gill, Remlik VA
>
Stubby 750
OB O'Brien
>
Jet Mini VS
keith zimmerman, Normal, IL
>
3520B and Jet Mini VS
Mike D
>
Jet Mini VS
Bart Goldberg
>
Re: Lathes
Sean Troy
>Powermatic 4224 and a Jet Mini
Re: Lathes
Harvey Meyer in Atlanta
>PM3520A, Jet 1236, Delta Midi
Re: Lathes Woodfast both long and short bed
John Kyler
>Had the short bed and needed the long bed to do some work.
Both VS and not a problem.
PM3520B and Jet mini
Bob Fawcett
>
Re: Delta 1442 and PM3520
Cyril Griesbach
>
Oneway 1018 NM
Brian McInturff
>
PM3520a & Nova 3000
Tony Reynolds somewhere near Newark, Ohio
>
2 VB-36's, one Vicmarc VL300, and one VL-100
TDaniel
>
General 26020VDR
Bill Howatt
>
PM4224, OW 2440, Jet Mini
Hooligan
>
Re: Lathes
Leslie S
>Jet Mini VS, a very old one in pieces and super cheap ebay one I call the big blue beast which is going to be set up for sanding soon.
Re: Lathes Woodfast both long and short bed
Lee Buck
>I've been pleased with my Woodfast long bed VS for 10 or more years. Were it still available I would recommend it as an upgrade to the smaller lathes.
PM 3520a
Norm Smith in Nova Scotia
>
Re: Lathes
Jim Hill
>Jet Mini VS... I love it but have not expanded beyond pens yet.
Oneway 2436
Richard Allen
>
General 160-1 and Jet Mini
Jim Shaver Oakville, Ont.
>
Nova 3000 and Jet Mini
Mike Stafford
>
Stubby 750 & General Maxi
Harvey Brooks, Victoria, BC
>