Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

flattening Waterstones- shapton pro

Posts

Re: flattening Waterstones- shapton pro

#101

Re: Traditional Method

Patrick Chase

Warren wrote: "I also have a 22 inch Ohio sandstone wheel but I do not use it for day to day sharpening; most of my woodworking tools have not seen a grinding wheel since I acquired them."

It's amazing what you can achieve with good enough technique to not chip your tools. Alas mine see the grinder more often than they should.

Re: flattening Waterstones- shapton pro

#102

Re: Washita vs soft Arkansas stones...

Patrick Chase

David has a comprehensive video on the topic, here: https://www.youtube.com/watch?v=TgQ1xhMtoBQ.

The short version is that Washitas use the same basic abrasive, but with a different structure and from different formations/mines. You can polish with a Washita (though IMO one can debate whether it's an efficient way to do so) whereas a soft Ark has a more limited range.

If you're determined to use one natural stone for everything for whatever reason then the Washita is a very good choice.

Re: flattening Waterstones- shapton pro

#103

Re: Washita vs soft Arkansas stones...

david weaver

If you clean off a stone and take a picture of it, I'll give you a good idea of whether or not it's a washita.

A soft arkansas stone generally looks like a bunch of particles smashed together, but a washita usually looks like a matrix with pores. Almost like a photographic negative of each other.

The pores on the washita allow it to cut well, even when the stone is "dull" and the washitas have a wider working range.

I shaved this morning (and most mornings the last few weeks) using a razor that I set up on a washita. It's a bit spartan, but with a linen, practical. I can't get an edge good enough off of an equivalently fast soft arkansas to just do that.

The only caveat to looking at a stone to tell what it is is that norton sold an awful large number of soft arkansas stones that look almost like their lilywhite.

Re: flattening Waterstones- shapton pro

#104

Re: Washita vs soft Arkansas stones...

david weaver

Speed is the reason. the pleasant surprise is that once you get some time in on a stone, you find that you can do very fine sharpening with it.

Ease and geometric control along with the speed is another reason. There is one bevel, one stone. you raise a wire edge and learn to remove all of the wear, then you learn to thin the wire edge and strop it off on bare leather and there are no other variables.