Re: Shooting boards and more
david weaver
Derek, you're right, I believe what I'm saying (though I do like to do a little pro wrestling style promotion from time to time when there is nothing going on a topic, I've kind of lost interest in that lately).
re: the stones and the infills, neither of those have anything to do with woodworking. The former is a fascination (maybe it's not clear when I say it, but I've used the term "the best thing about them is that they all work", which is intended to imply that once you're sharpening something, the world will not move much if you switch). The latter is solely related to toolmaking and not woodworking. I still maintain that the best of my infills are just a a little less practical than a stanley 4.
I've fortunately never fallen down the rabbit hole of high cost marking and layout tools, etc - never saw the value in them and still don't. That's where I think the beginners get stuck, and that market has exploded since I started. When Rob Hansen started making a $99 shoot board, we balked because it's something that you can make out of scraps - or if you're less enterprising - out of $10 of new materials. Jeske turned some nice marking knives at the time, and so, too, did Dave Anderson. It took little time for there to be dozens of makers of them, though, and there are lots of makers for these things (shooting board, dovetail markers, marking knives) because they're easy and cheap to make. Not easy like turning a faucet on and off, but not remotely close to the same kind of difficulty as there is in making an infill miter plane.
As to the heavy shaving, you're right, I set it once after getting the wedge fitted and shot a video. It's heavier than I'd leave it, but after shooting things years ago with tiny little ribbons and taking many cuts, I think I'd go more for a little heavy than previous (a little less than in the video). The same rules about slow pace don't apply to this plane - I am happy about that. Doing this with any other planes that I've had would result in a board that was out of square at least one way, and two if unlucky (with a complementary trimming of the fence occurring as part of that - unwanted of course). Not so with this one since it's in a track and it is immune to tipping because of the footprint - a luxury.
Not that I'm going to go on the hunt for more irons and start making a bunch of these to sell. I'm sure a gaggle of beginners could tell me how hard it is to set the plane and how they want irons in V11. I do think I'll make one more.


And don't even start me on vise-grips 


