New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

"Made in China" bias?

Posts

Re: "Made in China" bias?

#51

Wandering OT on you

John in NM

I'll keep it a little on topic - I have an old K-22, I think I've had the side plate off once in my life, just to see what was in there :D

But if your interest continues, and you like to tinker....

Try a second or third hand S&W 41, those things are super fussy :D Took a couple years to get mine working right, and it still only likes round nosed .22's like CCI and Winchester wildcat. Very fun to shoot though, nice grip and balance - that's probably what kept the design in production all these years.

When I go to a range in Las Cruces instead of our local gravel pit, one of my favorite activities is shooting all the empty shotgun hulls left by the skeet guys. They really jump, and are fairly challenging to hit :D

Re: "Made in China" bias?

#52

Re: Wandering OT on you

roger lance

John....my second revolver is a S&W 617 which is a .22.....and I'm doing the same....just plinking at cans and such.....and I also favor CCI mini-mags if you can get em.....I don't anticipate removing the plate until after a few thousand rounds have gone through the firearm which will take awhile.....but I want to understand how the weapon works and be capable of cleaning it internally when needed.....just like understanding your tools and being able to take them apart for maintenance.....another example of boys and their toys I guess.

Re: "Made in China" bias?

#53

Hardly seems fair

Bill Houghton, Sebastopol, CA

they can't run very fast. Sitting ducks...well, shells.

Re: "Made in China" bias?

#54

The other good one is golf balls...

John in NM

Got to pay for those though, so I stick to the empty shells :D

Re: "Made in China" bias?

#55

but not when a golfer is about to hit....


Re: "Made in China" bias?

#56

Re: but not when a golfer is about to hit....

BrianMonumentCO

Question is how would a golfer score it? (ignore the moment the impact of LEO)

Re: "Made in China" bias?

#57

A legitimate time to play a mulligan....

roger lance

IMHO.....

Re: "Made in China" bias?

#58

Re: A legitimate time to play a mulligan....

Tom

I don't think it is a Mulligan, which of course is not an actual rule of golf. However, if you are using that option in your game, it comes up when you misplay your ball, not when someone else shoots it. If the ball is moved you can replace it. If it is lost as a result of some outside agency, you can replace it. If it is destroyed, I think you can replace it. If you don't know where to place it you need to take a drop. If it happened in such a way that all you knew was that it was lost, you would have to play your third off the tee, or in accordance with a hazard, if the assumption became that it was lost in the hazard. If it was moved on the green, that is a whole other ball of wax. But I am no expert on the rules.

As a hacker, I normally just did some simple thing that I felt was in keeping with the spirit. I didn't take advantage, but crappy players often don't gain an actual advantage from "cheating". A pro with a good or bad lie at 80 yards, that is the difference between a 3 and a 2. For the hacker he is looking at a 3 or a 4 (or a lot worse to be honest), probably whether he tees the ball up in the middle of the fairway, or shoots from a lie just short of unplayable. If you play bad courses, while I enjoy the creative shot, you often virtually have to tee the ball up in the fairway to play real golf.

Re: "Made in China" bias?

#59

Shades of Henry Blake...

John in NM

Of course, these kinds of references were more fun before everyone had netflix and DVD's :D

Re: "Made in China" bias?

#60

Re: Shades of Henry Blake...

BrianMonumentCO

The outrageous thing about it is I know exactly what your talking about.

That was one of my favorite shows.

Re: "Made in China" bias?

#61

     


Re: "Made in China" bias?

#62

Re: Any feedback on Grace USA screwdrivers?

Michael Brady

Grace makes an honest, quality, if not pretty, product. They are all you need for any task around the wood shop (except working with split nuts). They have very durable straight tips that fit the screws they are designed to drive very well. They are the pedestrian version of what L-N designed they screwdrivers to do.

Gunsmithing has little to do with woodworking. Why it is discussed here is a mystery to me in the same way that knitting needles would be off topic.

Re: "Made in China" bias?

#63

Re: Any feedback on Grace USA screwdrivers?

BrianMonumentCO

Much of gunsmithing is about hand tools.

It is about working the wood of a gunstock.

So indeed, gunsmithing has something to do with woodworking.

I make a fair about of gunstock work each year.

I also do things that are not about wood.

But most are done by hand with hand tools.

So until Ellis tells me that gunsmithing is a verboten subject, I think it very much related.

After all the stock is nothing more than "furniture" in fact all the non barrel or action materials are considered to be furniture. Gunsmiths cut mortises, sand and finish stocks the same way woodworking is done. Albeit with more attention to shedding water.

We also make/customize hand tools to fit our needs.

Merry Christmas and Happy New Year.

Re: "Made in China" bias?

#64

Little to do with woodoworking?

John in NM

Wonders never cease :D

I guess reality is what you make of it, but I've sure sold a lot more grips and stocks than furniture.

Re: "Made in China" bias?

#65

Re: Little to do with woodoworking?

BrianMonumentCO

In gun terminology grips and stocks are furniture.

Merry Christmas.