We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I experiment with something until I find a good solution, then I pretty much stick with it. I do find discussions on here intersting, and apreciate the people who take time to post. For instance the discussions on sharpening with diamonds has convinced me I want to try it. Without the discussions about it on WoodCentral, I would be completely ignorant of it.
.....though I mentioned I was settling toward a means of layout and assembling case pieces and drawers for them. It never crossed my mind that anyone would be participating on WC unless they wanted to learn new stuff in order to practice new stuff. I even bought a Japanese saw and danged if I didn't fine an efficacious use for it.
There are a variety of reasons.
1. My skills improved by a large amount and to no small measure as a result of Badger Pond and WC. Had I settled, as you advocate, 20 years ago my dovetails would be machine made, fitting would be more or less with a table saw, rasp and sand paper and cases would be made with out sliding dovetails. Finish would be lacquer and stain Minwax.
2. I am constantly striving to improve my skills through experimentation, classes, interaction with those better than I , etc. With improved skills I can make better stuff and maybe make it quicker.
3, And finally a factor I suspect you can not understand. My approach to life is that everything can be improved through experimentation. I devote a certain fraction of life to experimentation, and some of that includes woodworking(and never with my body).
The discussions of diamonds here, and private emails from Bill T, did convince me to try it. Believe me, you'll like it. Has anyone mentioned how cheap it is, especially compared to the bevy of waterstones you'd need?
Bill....I'm right down there at the bottom of the tech barrel when it comes to a computer....heck, I still do not have a cell phone....and worse yet, no grand kid to explain it to me....I'm on a Mac and need to go to the Apple Store and get schooled which I hope to do soon....so thanks for your offer, I still may take you up on it....the nightstand is white oak with rift sawn for all exterior parts except the free floating side panels, drawer fronts, and top which are QSWO....interior guides are hard maple....so I might try to e-mail Moses some pictures just to get one posted....thanks again.
Moses....thats a generous offer and tomorrow I'll give it a try....the nightstand is together on my assembly bench for the dry fit....so I'll send a little description along with the pics....thanks again.
this summer has been nearly a total waste for me (actually for anyone who works in the garage in MN). The combined heat and humidity (with heat index days of 123F) have been absolute killers.
In July and most of August, I did no woodworking. The last couple weeks I've been making a couple salt boxes, starting with some firewood that my wife didn't want burned the last time we went camping. That was a piece of green ash. Two others are made of glued up walnut and one more is corian. All turned round, routed with two cavities, one for salt, the other pepper, with matching lids, nothing fancy.
We're supposed to have a long, warm, dry fall and if that's the case there will be a couple clothes trees produced. That and an attache-style tool case that will hold a basic set of hand tools.
...I made five lensboards for a Seneca 8x10 today. Stepped profile on the rebate. Finicky little things to fit to the standard. Gave the shoulder plane a workout...
1st law of thermodynamics work is path independent
GolfSteve in Calgary
There's a reason to be afraid of grinders. They can hurt you if you don't use them right.
However fear of using a grinder is, for most people, actually the pleasure centre of their brain wanting to avoid the disappointment they experience when they blue an edge because their technique isn't good enough.
There's no real fear in preferring to use a western or Japanese style plane. The only "fear" us amateurs have is wasting our precious time learning a new tool or wasting some good wood while you're working your way up the learning curve with a new tool or technique. This is something I fight with - eg. should I learn how to spray a finish (requies a learning curve, time expenditure, cost) or just use the finishing methods that I already know?
There's also the fear of learning a new technique only to find that it really isn't a very good technique - thus wasting your precious time.
The first law of thermodynamics applies even to woodworking - it doesn't matter how you get from point A to point B as long as you get there. Most of us try to minimize the power expended to do a certain amount of work - thus the discussions that occur on these forums about which technique or tool is better.
I don't put the same meaning into the word "fear" that you seem to be doing, Pam. I think most people are using the term to indicate reluctance to try a new technique or belief that their technique is superior. I've never thought that people are stating that a person is actually afraid/frightened in the true sense of the word and don't think a perjorative implication is intended. One of those English language ambiguities.
Re: 1st law of thermodynamics work is path indepen
Pam Niedermayer
Maybe not, but it seems like the word "fear" is always used by those professing some expertise, and it always sounds limiting rather than challenging. Why not say concern instead? For example, maybe I typically don't grind edges because I don't want hollow grinds, would have nothing to do with fear of a grinder, for me or a blued edge.
I notice that we (Canadians and Americans) have become very sloppy with our vocabulary. This is quite often pointed out to me when working with my colleagues from England and Germany, whose day to day English vocubulary is more extensive than mine. I don't recall the correct figures, but one Englishman told me that an average Englishman has an 8000 word vocubulary and an average North American has a 5000 word vocubulary (the numbers are made up, but I have communicated his point).
I find that many North Americans tend to use simple words even though they are imprecise or even wrong, and we rely on the recipient to correctly interpret our meaning based on the words and the situation. My European colleagues occasionally edit my writing and a slightly expanded vocabulary, used correctly, greatly improves the clarity of my writing.
Just to clarify I'm speaking of highly educated Germans and Englishmen. The average working class Yorkshireman or German millwright has a completely different vocabulary, definetly not the Queen's English :-)
Even the Chinese translators that I work with, who speak minimal English, often bamboozle me with questions about why we have used certain words in our documentation. Words that are obviously imprecise, or even wrong, but that are in common use. For example in the previous paragraph I orignally wrote "well educated". I changed that to "highly educated". Is there a difference?
Fear vs. reluctance.
Reluctance vs. concern.
Concern vs. scared.
Scared vs. chicken.
Chicken vs. yellow.
Fear vs. yellow.
All similar words but different meanings can be intended by the writer than are interpreted by the recipient because we have become sloppy in our usage.
if you watch cooking shows, you'll note that the cook never uses a shaker to season food. They always take a pinch from a container on the counter top. This is one form of that container.
Use of the word is somewhat appropriate, most of us are afraid of failing, or looking foolish due to ignorance, and that accounts for a lot of our reluctance to try new things. On the other hand, most of us are also fond of seeming to be experts, and we all know the internet is a place of experts
SMC has suffered from heavy handed moderation as long as I've been looking in there, part of the reason I prefer it here I seem to recall some getting the boot for little more than polite yet firm disagreement with the powers that be, and others for doing nothing more than questioning the wisdom of giving dissenters the summary erasure. Such is the nature of internet forums, you'll just have more time to post here
A new shop. Walls aren't plastered yet, but we've moved all the tools, machines, and lumber out of the dark dreary basement I've been renting for the last 5 years. I hope to get a lot more work done once the more pleasant work environment is completed
I'll admit though, on the fourth and final building, I'm thoroughly sick of construction
That's all true. However, in my case, things are hurried along by a few guys who really, really don't want a woman questioning their authority; and they seem to dedicate themselves to provoking me to say something the moderators consider ungood. It's happened here, although not in some years, and other places. These guys seem to get burrs up their collective butts. And it happens just when I begin to think it won't happen again. Fortunately I no longer take it personally, even if I should. So I choose to believe it was because I questioned the use of "fear."
John, if it ever cools down again, I'll start work on my shop that's been in limbo for a few years, the plan is for a November restart date. Then the torrents of woodworking can emerge.
I don't believe you're interested in constructive discussion. If you were, you could have started a thread about the advantages you find in your flat bevels. Instead you chose to continue your personal attacks. While you appear deeply offended that anyone might possibly assign motivations to your practices, not that it actually happened, but you seem to feel it's perfectly legitimate for you to ascribe what ever negative motivation you chose to others.
Is it true,is it fair and (maybe most importantly) is it kind?
One more question to ask is if it contributes to the discussion in a constructive manner or just serves your ego.
Helpful tips I recently received in an effort to help make me a more effective communicator both in private discussions and more importantly in public.
FWTW-I think we can agree that message boards/forums like this can be considered a form of public communication.
I believe I'm pretty consistent on the first two, but man, that third one can really be a killer A good reminder for one and all.
The fourth can be a bit more complicated, but even some of the more heated posts serve their purposes.
For all the feelings that discussions such as these waste time and bandwidth, irritate people on both sides and most observers, and generally are inappropriate for a WW forum, I tend to think that they are helpful because they serve as a good reminder of how to conduct a civil discussion (and in some cases how not to conduct one).
I've been on forums with lots of rules, and rather heavy moderation, and found the forums to be largely about the drama of those rules and the breaking of them. On this and one other forum I like, rules are more like guidelines, moderation is light for the most part, and we largely depend on posters' good judgement and ability to exercise restraint. And for the most part it works well, in large part due to the tolerance of this kind of discussion and the good examples these discussions often produce.
Pam, it's incredible to think that generalizations are made by people who are thinking directly about you and intending to insult you. If you don't fit in the category of people who are afraid of dry grinders, then ignore the comment. Life is easier for everyone.
I saw many people say they were afraid of dry grinders in that thread, either before they tried them or now because it's been described as a way to burn tool edges and they are afraid to try it.
I saw larry being more patient than I ever saw before, only to be accused of things he didn't do.
It is what it is, seeing things that you extrapolate into things you don't like on a forum will be around as long as forums are around.
For now, I agree 100% with Larry's comment below, or above, or wherever it is.
Charles, I never could figure out why you were so concerned with what other people do, and if there is aggravation over it, why intentionally subject yourself to it?
It may not convince key parties, but whether or not I agree with someone or what I post about it is never motivated by gender of other posters. Ever. It can sometimes be motivated by memory of how certain posters have a history of responding, especially if it is a recent history.
But not ever by gender. I'm not that old, and I didn't grow up in that kind of household.