New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Fear

Posts

Re: Fear

#51

Me, too!

David Weaver

Tablesaws and shapers. My tablesaw is gone, but before I stopped generally using a TS (because losing fingers would be detrimental career-wise), I did get a genuine kickback where I was the cushion.

I guess that started the fear itself. I wouldn't have issues with shapers that have power feeds, but I don't like the look of work where a shaper has been used in a heavy-handed way, anyway. I do have a real fear of using one feeding by hand with a large diameter cutter.

I share the fear stephen says about finishing. Not whether or not I can do it, but on something like a rubbed out lacquer, how long it's going to take and how much planning I will need to do about when some of it needs to occur. I fear the planning and the scads of time buildin finish and rubbing it out. That fear of time involvement causes procrastination.

Fear of the TS caused examination about whether or not I wanted to allow it to hog space in the shop, and eventually, sale of the TS.

Re: Fear

#52

I have another fear...(tools and finishes)

David Weaver

.. that the hand tool renaissance will be swallowed up by a bad economy or lack of interest in the long term, and the organized sources we have for tools and materials will dry up.

And that good solvent finishes will be unavailable at some time in the very near future.

Re: Fear

#53

Perhaps...

John in NM

The problem comes more from blunt questioning of expertise than the gender of the questioner. People generally have pretty thin skins and the internet seems to make them thinner. Reputation remains important to most people, but few seem to understand the self discipline required to attain and retain a good one.

Situation is complicated by there being about six "correct" ways of doing most of what we do in woodworking, and further complicated by what I think is a strange intransigence (that's for GolfSteve :D ) when it comes to accepting that methods not one's own may be perfectly valid.

Add a bit of rudeness into the mix (real or perceived) and ya got a big old spitting match going. Add that people generally feel justified in being rude in return and the spitting match expands. Then there's always the trouble of individuals who's buttons we just like to push.... If someone's trying to push yours, might be helpful to remember they're just burning their own reputation in the view of many.

Far better to ignore slights, whatever their motivation may be, than to respond to them. Heck, learned that one at recess :D

Re: Fear

#54

You said it!

John in NM

Add in walnut canker and we could be verging on despair :D

Re: Fear

#55

I can add one....

John in NM

Fear of starting a project in the first place :D

In the planning stages, everything remains perfect and none of those pesky mistakes have yet been made! :D

Re: Fear

#56

Re: Fear

Charles

David, we are by definition discussing what other people "do" or in this case are scared of doing or are in fear of doing.

Re: Fear

#57

Re: Fear

David Weaver

Do you fear posts by people who are trying and comparing methods? :b

Re: Fear

#58

Re: Fear

David Weaver

>>.. 10 minutes as a kid to realize that attributing motivation usually resulted in a wrong attribution, therefore was a waste of time. <<

Right. Wrong like attributing the characteristics of a response as a gender bias issue.

Re: Fear

#59

Re: Fear

Charles

Not substantive ones no, otherwise, yes - insipid stuff like waterstones vs. oilstones, bevel up vs. down, all the righteous crap and pseudo-mystique concerning Asian tools. If all that garbage all of a sudden ceased it wouldn't bother me a bit.

Re: Fear

#60

Larry? 


Re: Fear

#61

Re: Fear

David Weaver

I have a fear of the psuedo mystique issue, also. Wedging an iron into wood and then pulling the whole thing across wood is pretty simple. There's no great reason to explain it as more than that.

Laminations and hard plain carbon steel aren't exactly new, either, nor difficult to understand.

Re: Fear

#62

Re: Fear

Charles

We appear to have agreed, at least partially, on something.

Re: Fear

#63

Silence, in this case, is NOT implied consent.


Re: Fear

#64

Re: Silence, in this case, is NOT implied consent.

David Weaver

Water under the bridge sounds good to me as a resolution. You? Easier to forget about what was or wasn't taken the wrong way.

Re: Fear

#65

Re: Sloppy and reduced vocabulary

David Weaver

Tell them we spell it "yellar" in the United States.

Just spent a few days with a scot in the house. I'll sum it up as, more words (well, different, maybe not more than get used in our household), definitely faster, and harder to understand.

And a much better appreciation for single-malt scotch than we have in our house (finally found someone who would drink it so I didn't have to waste it using it to start fires in brush piles!).

English folks (and scots) definitely don't think highly of the way we use the language over here - they use it like orderly tinkertoys and we use it like silly putty.

Though scots don't like it too much if you lump them in with the english, either.

Re: Fear

#66

Re: Sloppy and reduced vocabulary

TomD

One could argue they use it to order and class people, and americans use it to level. So you get north eastern US politicians saying "duhdint" instead of didn't. But at least you don't have to listen to Tony Blair.

Re: Fear

#67

Please remove Derek from the "Fear List"

Pam Niedermayer

And, Derek, please accept my apologies.

We'd had a disagreement several weeks ago about assumptions taken when talking about BU plane blades, and while I was on a road trip and out of contact, I misremembered what Derek had said, but I thought about it a lot. And when the fear stuff came up, I erroneously lumped assumptions and fear assumptions together. My bad, my very, very bad.

Pam

Re: Fear

#69

Re: I have another fear...(tools and finishes)

Warren in Lancaster, PA

Maybe you were not around then, David, but the hand tool renaissance withstood a decade of poor economy in the 1970's.

Re: Fear

#70

Re: I have another fear...(tools and finishes)

David Weaver

I was around, Warren, but in diapers or a little older toward the end of the decade, so you're right - I definitely didn't observe by participating. At least not by more than asking dad for junk boards that I could pound nails into.

Re: Fear

#71

Re: 1st law of thermodynamics work is path indepen

TomD

You might not be afraid of drawing the temper, but a lot of people are, and this is given as a reason not to grind by many. The problem with online is that if one jumps to a conclusion about the nature of the question being asked, then there is the possibility of getting into an argument, but it is also pretty hard to have any kind of conversation without making some assumptions since the format is stilted enough without having to create ten page multiple choice answers to every question. The whole thing is made worse by the fact that many many people do not specify in any way at all why they are asking questions. They might ask "should I use a dry grinder, would it be better". Leaving potential responders with absolutely no grip on what the person is trying to get at. But from personal experience, I know that when one asks a question with details, it almost always get picked appart in precisely the direction one didn't want to go with very little useful information imparted. It is amazing that anything ever comes of any of this.

Re: Fear

#72

Re: On the one hand...

bugbear

However, in my case, things are hurried along by a few guys who really, really don't want a woman questioning their authority;

I don't think so. There's a perfectly adequate number of people out there who don't like their authority questioned, regardless of the gender of the questioner.

I don't think you're being singled out for any reason, including gender.

I think "fear" in this sense simply means "anticipation of undesirable negative consequences". I (for one) don't find that insulting.

BugBear

Re: Fear

#73

Re: On the one hand...

Pam Niedermayer

Maybe so, but I seriously doubt it. One of the things you learn over 60 years of second and third class treatment is how to recognize it when you see it. Probably a little subtle for most men, unless they're short, puny, fat, colors of all sorts besides white, etc.

Pam

Re: Fear

#74

Re: 1st law of thermodynamics work is path indepen

Pam Niedermayer

I'm always concerned about temper when grinding; therefore, I take precautions. But it would never occur to me to be afraid of it. Paul is probably correct in the definition of fear to use. My primary point is that if some people in a conversation think everyone else is afraid, they'll tend to talk differently to those other people and good conversation will disappear.

Usually when a questioner doesn't specify a reason for asking, it's because they know that if they do they won't get good answers, or no one will respond at all, or they're embarrassed not to know, or it's too hard to explain, or ad nauseum. So if someone says, "Hey, how much should I price this item for on ebay?", I know I'm unlikely to spend any time answering. This interface is awkward, though, no question.

Pam

Re: Fear

#75

Re: On the one hand...

bugbear

Probably a little subtle for most men, ...

That sex based prejudice sure gets around, doesn't it? :D :D

BugBear