Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Sawstop Saga

Posts

Re: Sawstop Saga

#101

Re: Sawstop Saga

Andy Lincoln,in Dearborn MI

I read thru this thread and have been reading the responses as they are posted as well.

I think Tom has pretty much said he has lost faith in this saw among other things. My wife is the type that for instance if she had a car accident or major repair issue she'd never fully trust that vehicle/repair etc. Just how she is. I could see the same worries with a saw/tool/etc if you have had several incidents in a short span of time.

I could very easily understand how frustrating it would be to have the down-time,troubleshooting issues Tom has experienced. I'd be frustrated too ,no matter the brand of saw or any new tool that doesn't perform within a reasonable expectation of how it should perform.

I'd think any manufacturer,not just SawStop should step up and work with the buyer and vendor to come to a reasonable outcome. In Tom's case there is something defective with his saw. If a technician can diagnose and repair the saw great if not the manufacturer should step up to accept the return. I would think any major piece of woodworking equipment,warranty or not as a consumer I should be able to expect the machine to run without issue for atleast 1 year without more than standard maintenance,barring abuse or neglect.

Re: Sawstop Saga

#102

Re: Sawstop Saga

BrianMonumentCO

Andy,

I think we do not have a TRUE answer to what happened.

Did Mr Skaggs get to send the saw back?

Did the Technician find a technical reason for the failures that was SawStops problem?

Did the Technician find that Mr Skaggs was doing something wrong?

We don't have that resolution.

Do we. We know that Mr Skaggs stated that it was a well made machine.

That sounds odd if he was sending it back.

Unless prostituting his values to get a refund was part of the deal to send the saw back.

I feel cheated somehow that Mr Skaggs has not posted a TRUE and complete answer.

I know that he believe in his privacy.

I still wish him no ill will, even if we disagree on anything.

Re: Sawstop Saga

#103

Re: A quick response from LeeValley customer servi

Rob Lee

Hi Mark,

A quick note on returns. Generally, policies like return policies are there for people that abuse them. At our firm - judgement still rules, and we can certainly step outside of set guidelines. At the same time, we need something to point to for the very odd case of abuse ( and it does happen ).

Cheers,

Rob

Re: Sawstop Saga

#104

Re: Sawstop Saga

TomD

"I just watched the inventor of the SawStop doing exactly what the saw was invented to do....with his own finger.....and it worked perfectly. The video is on YouTube."

That is a bit like watching a stuntman take a fall off a bicycle and popping up claiming that his foam helmet saved his life. He knew what was coming.

I actually fell off a bike badly enough to be treated at hospital, I went over the handlebars, pretty hard to manage on a a road. I got some stitches; I also cut my finger on a table saw once. I got a tiny little v-notch in the end of my finger, not much blood as I remember; and once I pulped my finger on a router after massive kickback. These would all be things that if I had to repeat them I would want a helmet, a Sawstop, and I would just prefer not to do the router thing at all.

But it does go to show that on can really mess up and walk away with minor injuries. But one has to figure that anyone with the same scenarios wearing protective gear would probably swear up and down that the gear saved their life, or fingers, or whatever.