Archive
Badger Pond (180)
Bob Smalser (48)
Book Reviews (223)
Chat Transcripts (28)
Contests (15)
Finishing (80)
Tales From Grandpa Augustus (11)
Furniture (41)
Hand Tools (117)
Jigs (110)
Popular (36)
Power Tools (79)
Reviews (95)
Russ's Corner (26)
Shop (143)
Shop Shots (974)
Splendid Splinters (44)
Turning (145)
Video Reviews (29)
Search results for "robland x31" (1-13 of 13)
CART FOR COMBINATION MACHINE ACCESSORIES
by Charlie Belden The Robland X31 combination machine has quite a few pieces and parts that aren't normally left on the unit. The XYZ mortiser table is probably the heaviest of these parts. It's also?...
Keywords: Shop
by Charlie Belden The Robland X31 combination machine has quite a few pieces and parts that aren't normally left on the unit. The XYZ mortiser table is probably the heaviest of these parts. It's also?...
Keywords: Shop
COMBINATION MACHINES
One of the main reasons I came along on this trip was to see if I could find out why combination machines are apparently so popular in Europe, while they remain relatively scarce in America. Combinati...
Keywords: Power Tools
One of the main reasons I came along on this trip was to see if I could find out why combination machines are apparently so popular in Europe, while they remain relatively scarce in America. Combinati...
Keywords: Power Tools
COMBINATION MACHINES - A CASE FOR THE ROBLAND X31
by Charlie Belden The Robland X31 is a five function, three motor (each 3 HP, 240V TEFC), >½ ton, $6,000 beast. This is not your mother's ShopSmith nor any of its cousins. If you have limited shop...
Keywords: Reviews
by Charlie Belden The Robland X31 is a five function, three motor (each 3 HP, 240V TEFC), >½ ton, $6,000 beast. This is not your mother's ShopSmith nor any of its cousins. If you have limited shop...
Keywords: Reviews
ESTA KNIFE ROBLAND RETROFIT
to the Robland X31 By Paul Jordan The Esta Dispoza-Blade™ system is designed to allow quick knife changeover with no sharpening involved - simply replace dull knives with a set of new, dispos...
Keywords: Badger Pond
to the Robland X31 By Paul Jordan The Esta Dispoza-Blade™ system is designed to allow quick knife changeover with no sharpening involved - simply replace dull knives with a set of new, dispos...
Keywords: Badger Pond
JESADA MILLENNIUM SHAPER CUTTERS
By Paul Jordan This review covers the following 3/4" bore cutters: Combination Rail and Stile (CIT-107) Door Edge (CIT-251) Double Rail and Stile (CIT-221) Multiple Profile (CIT-263) These cutter...
Keywords: Badger Pond
By Paul Jordan This review covers the following 3/4" bore cutters: Combination Rail and Stile (CIT-107) Door Edge (CIT-251) Double Rail and Stile (CIT-221) Multiple Profile (CIT-263) These cutter...
Keywords: Badger Pond
MICRO RAIL FOR ROBLAND X31
Installation Of The Sliding Rail Micro-Adjust Kit For Older Models Of The Robland X31 [This information is not affiliated with Robland or Laguna Tools.  The information presented here is in no wa...
Keywords: Badger Pond
Installation Of The Sliding Rail Micro-Adjust Kit For Older Models Of The Robland X31 [This information is not affiliated with Robland or Laguna Tools.  The information presented here is in no wa...
Keywords: Badger Pond
PHOTOS OF THE ROBLAND FACTORY
Workers assemble a batch of panel saws on the floor of the Robland plant. A fully-assembled X31 combination machine awaits inspection before shipment. An inspector adjusts the sliding table of this X3...
Keywords: Power Tools
Workers assemble a batch of panel saws on the floor of the Robland plant. A fully-assembled X31 combination machine awaits inspection before shipment. An inspector adjusts the sliding table of this X3...
Keywords: Power Tools
REBUILDING A ROCKWELL TABLESAW
By Paul Jordan Illustrations by Loren Hutchinson This document covers my repair-rebuild of a Rockwell tablesaw, model 34-348. This model was the precursor to the current delta 34-444 and I'd imagine m...
Keywords: Badger Pond
By Paul Jordan Illustrations by Loren Hutchinson This document covers my repair-rebuild of a Rockwell tablesaw, model 34-348. This model was the precursor to the current delta 34-444 and I'd imagine m...
Keywords: Badger Pond
REVIEW - ROBLAND X31
by Kelby One and one-half weeks ago I picked up a new Robland X31 combination machine from Laguna Tools. Wow! This is a huge upgrade to my shop, and I haven't been able to spend a free minute outside ...
Keywords: Reviews
by Kelby One and one-half weeks ago I picked up a new Robland X31 combination machine from Laguna Tools. Wow! This is a huge upgrade to my shop, and I haven't been able to spend a free minute outside ...
Keywords: Reviews
REVIEW OF HAMMER B3 AND A3-41
Hammer Trend B3 Sliding Tablesaw/Tilting Shaper Hammer Trend A3-41 16" Jointer/Planer August 2000 Note: I consider these reviews to be "preliminary" not in the sense of really being incomplete, but ra...
Keywords: Badger Pond
Hammer Trend B3 Sliding Tablesaw/Tilting Shaper Hammer Trend A3-41 16" Jointer/Planer August 2000 Note: I consider these reviews to be "preliminary" not in the sense of really being incomplete, but ra...
Keywords: Badger Pond
REVIEW OF THE MULTICO PM16SP HOLLOW CHISEL MORTISER
Major specifications: Weight: 40 lbs. Motor: 115v, 7.3 amp, 3/4 hp Stroke: 4-3/4", can mortise 4" stock 4" from the fence, adjustable dovetailed slides Chuck: Rohm (made in Germany) 3/8...
Keywords: Badger Pond
Major specifications: Weight: 40 lbs. Motor: 115v, 7.3 amp, 3/4 hp Stroke: 4-3/4", can mortise 4" stock 4" from the fence, adjustable dovetailed slides Chuck: Rohm (made in Germany) 3/8...
Keywords: Badger Pond
ROBLAND X31 FAQ
By Paul Jordan = What is a Robland X31 and who sells it? What are the overall X31 specifications? What does it cost? Is it worth the price? Why are used machines usually for sale? What about Laguna Sa...
Keywords: Badger Pond
By Paul Jordan = What is a Robland X31 and who sells it? What are the overall X31 specifications? What does it cost? Is it worth the price? Why are used machines usually for sale? What about Laguna Sa...
Keywords: Badger Pond
THE ROBLAND TOUR
Our chariot arrives at the headquarters and factory of Robland - Landuyt, a few kilometers from downtown Bruges. Short days and dismal weather are routine for this time of year. After an enormous cont...
Keywords: Power Tools
Our chariot arrives at the headquarters and factory of Robland - Landuyt, a few kilometers from downtown Bruges. Short days and dismal weather are routine for this time of year. After an enormous cont...
Keywords: Power Tools
1
Comments (0)
No comments yet. Be the first!
Leave a Comment