Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

OK, everybody laugh...

Posts

OK, everybody laugh...

#1

OK, everybody laugh...

GaryG in MD

Even though I am nothing more than a rank hobbiest with very low production, I view myself as a wood arteest, rather than as a craftsman, for NO reason other than that I make things to look pretty on shelves. OK, you can all laugh. Particularly you, Steve! So what we have here is, for me, rather Earthshaking.

Drum roll...

My daughter asked me for a "salad bowl", so, of course, I made her one. And a very nice walnut heartwood bowl it is, too! At least I thought so. It was as big as I could make on my little 12" lathe -- 10.5" diameter (hey, they shrink!). So here, for your viewing pleasure, I present the raw material, the "gallery" version, and the destined usage. Now, I'm a Craftsman! ...GG




Re: OK, everybody laugh...

#2

Chuck Jones - West TN

No laughing here.

Chuck Jones - West TN

That's one darned nice bowl. I am wondering what happened to the rest of the blank. That chunk of walnut looks like it's 18-20 inches. :)

Re: OK, everybody laugh...

#3

Thanks, Chuck,

GaryG in MD

I don't think the heartwood was more than about 15", and I'm afraid the remainder succumbed to the "process". I roughed it to as close to the limits of the lathe as I could get -- about 11.5" -- but, when you consider the 6% radial shrinkage upon drying, that only leaves 10.75" max. I figure I did pretty good to keep it at 10.5". The logs always look a lot bigger than the bowls! ;-)

I appreciate your kind comments.

The rim is undercut, and the bowl is actually fairly thin and light for its size. I got a perfect symmetry on the grain pattern in both directions.

It doesn't show well in the photo, but the color in real life has some nice reddish highlights.

It has a very subtle foot at 1/3 the diameter -- just enough for style and stability. It was definitely a fun project. I love walnut. I've always been a huge fan of the walnut bowls of Joe Moran. ...GG

Re: OK, everybody laugh...

#4

yes, those serving paddles have to go!

GaryG in MD

I guess next I'm going to have to carve a set like Steve does.

But wait... I think I can turn some like Stephen Hogbin's!

Yeah, that's the plan. That'll be fun, right, Ed? ...GG

Re: OK, everybody laugh...

#5

Re: OK, everybody laugh...

Joe Herrmann

Looks like a very nice salad bowl and your daughter will cherish it.

Re: OK, everybody laugh...

#6

Steven Antonucci

If I was you...

steven antonucci

I would move my lathe inside one of your downstairs rooms to have more full-time access to it! Maybe a little dust collector with a screen you could vent outside? Step up production a little bit?

It's a good looking bowl. Only issue is that you didn't make the 4 serving bowls that go with it ;)

S

Re: OK, everybody laugh...

#7

Looks like a winner to me Gary!


Re: OK, everybody laugh...

#8

Worthy

Mark Mandell - Gone Round In New Jersey

of a Caesar! ;)

Re: OK, everybody laugh...

#9

Outstanding in every way!


Re: OK, everybody laugh...

#10

Brad Vietje

No Laughing Matter, Gary...

Brad Vietje

...that is a fine looking bowl, and a really nice gift!

Anyone here would be proud to receive a gift like that, so you better get busy and make a few hundred more just like it :D !

Safe spinning,

Brad Vietje

Newbury, VT

Re: OK, everybody laugh...

#11

Re: No Laughing Matter, Gary...

phillip Medghalchi

Gary, that's a beautiful looking bowl, but I guess you missed my birth day on the 14 Th, I sure didn't get any of those bowls. :D , if you have some more of those walnut, I'll be sending you email?

Re: OK, everybody laugh...

#12

Keith Tompkins

Re: OK, everybody laugh...

Keith Tompkins

HI Gary, I'll jump in as well...Nice! Time for a bigger lathe? :)

Re: OK, everybody laugh...

#13

good points, Steve

GaryG in MD

The four serving bowls (excellent idea) are a lot more likely than covering my wine collection with chips and dust! ;-) But I know what you mean. If (and that's a very big IF) we were ever to move to a new location, you can bet I'd make sure to have a proper workshop and a much bigger lathe. ...GG

Re: OK, everybody laugh...

#14

ooooooooohhhhhhhhhh!

GaryG in MD

Good one. ...GG

Re: OK, everybody laugh...

#15

Thanks, Brad

GaryG in MD

I have plenty more dried rough outs -- just a matter of finding turning time.

Life (and finishing the ones I've already turned) keeps getting in the way. ...GG

Re: OK, everybody laugh...

#16

Thanks, Phillip

GaryG in MD

There are several years between the first and second shots -- and that blank was a single 'get' at a Silent Auction. We have a fair amount of walnut here in MD, but I hate to see them come down. I'd rather have living trees than bowls. ...GG

Re: OK, everybody laugh...

#17

Hi Keith,

GaryG in MD

Nice to hear from you.

Yes, that would be ideal.

But Steve knows my limitation -- I have to be able to lift it!

At least one end at a time, to get it over the sliding glass door frame from my family room out to the patio where I do my turning. I'm afraid the motor end of my 1236 -- around 120# (?) -- is about all I can handle.

I suppose I should consider a Nova DVR with a 16" swing.

I think that's about the same weight.

Hmmm... This is giving me ideas...

...GG

Re: OK, everybody laugh...

#18

Thanks Joe & Jamie


Re: OK, everybody laugh...

#19

Thank you, Don


Re: OK, everybody laugh...

#20

Re: OK, everybody laugh...

Terry Scott

Gary the only reason I am laughing is because of the gaudy salad spoons

Hopefully I haven't put my foot in it and you made them to L.o.l

If you didnt I think some wooden spoons would be a good thing ,Plastic just doesn't cut the mustard with this lovely gift

Re: OK, everybody laugh...

#21

Re: Thanks, Phillip

phillip Medghalchi

Gary, what I meant is if you have any of those logs on the grounds, not for you to cut it down.

Now, about your lathe, why not make a tand on rollers that you can lock it when you move it to outside on the patio, and move it back into the house when you are done with it, until your situation allows you to have a dedicated shop and place for it. It doesn't need to be elaborate, you can probably put one up together out of 2x4 so it only severs as a cart for the lathe and it allows you to move it where you are working. Being a former therapist, I am afraid that one day you may not be in the best physical condition for that day and when you go lifting the motor end of the lathe(head stock) you may throw back out and I can tell you that you won't be happy. This little suggestion I made can save you lots of aggravations down the road.

Re: OK, everybody laugh...

#22

Gary, there are some really good.......

JamieDonaldson

...wheel sets for a Mustard Monster! ;)

Re: OK, everybody laugh...

#23

Re: Gary, there are some really good.......

John Lucas

all of the wheel sets I've seen for the Powermatic would never roll over a doorway obstacle. I have removeable wheels for my powermatic that are 6" in diameter and they will barely roll over any obstacle. Apparently they are all designed to roll on a flat concrete floor. I'd like to see a good set of removeable pnuematic wheels. That way I could roll it out onto my gravel driveway and turn during the good weather.

Re: OK, everybody laugh...

#24

Re: OK, everybody laugh...

Gordon P Patnude

Dang good work, if you ask me!!

Re: OK, everybody laugh...

#25

I agree!

GaryG in MD

Terry,

See my comment near the beginning of the thread!

Not mine, not mine!!!

I'll be turning some Stephen Hogbin style paddles to replace those!

How's Winter? ...GG