Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

OK, everybody laugh...

Posts

Re: OK, everybody laugh...

#26

Thank you, Gordon,

GaryG in MD

No question that it's fun to go from raw materials to raw materials. ;-) ...GG

Re: OK, everybody laugh...

#27

Jamie,

GaryG in MD

I know -- we have a set for the Oneway 2436 at the Club too.

In my case, I have to be able to lift it over a couple inches of sliding glass door track AND a shallow concrete stepdown that keeps rainwater from getting into my lower level! I'm not going to be lifting much more than 120# any more! ...GG

Re: OK, everybody laugh...

#28

Re: Jamie,

John Lucas

Gary could you build a custom fitting wooden ramp that the wheels could ride over. Doesn't have to be fancy, just a gentle arc on the top and the bottom would be cut to match the terrain your going over so it would sit solidly.

Re: OK, everybody laugh...

#29

John,

GaryG in MD

The simple answer is "YES".

Maybe I should start considering that.

It could probably be made to work, with a little effort.

The Nova is far from my favorite lathe, but I guess I should be looking into that too. Thanks for the continued thoughts. ...GG

Re: OK, everybody laugh...

#30

time for production, Gary

phillip Medghalchi

Gary, we gave you all the solutions, so lets get to work and crank up some beautiful pieces, by you typing will not help with the shop time and please report which way you decide to go and what you do with these ideas and let us enjoy your success. We need pic.s as how you overcame this obstacle, we had enough engineers in the house and innovators to give you some solid answers.

So, it's time to put that hurdle to rest and make some gallery worthy pieces. and, i heard you guys have some out of this world cool summer this time around, so no excuses like the hellish weather and temps. we got down here in S. TX. It's already 9:32 PM and the darn temp is hovering around 90+ sill. You think I can put finish on my pieces, no way. but you guys got around 70's. I break for that?

Re: OK, everybody laugh...

#31

Phillip

GaryG in MD

You're right about the weather. It has been unusually cool and quite delightful. My turning time has unfortunately been limited by "life" getting in the way. Hey, life happens. I'll do my best to get cranking! I have lots of ideas I want to try. ...GG

Re: OK, everybody laugh...

#32

Re: Phillip

phillip Medghalchi

Gary, you live the life, don't sweat the small stuff, and just try to enjoy it. Every thing happens for a reason. and everything is another opportunity for us to learn something from it. Honey do list is part of the marriage contract. it will never get reduced, just gets replaced with new do's. Now, you can tell your better half that if you spend little time here and there for yourself doing your hobby it will make you a happier person. then you'd be a better person to deal with life challenges. then you only get in the shop for a little bit and do little at a time. You try this therapy and we'll talk in about a week, then you tell me if my idea did not help you to deal with life challenges. you can tell your wife that there is a new therapist on line and he is full of ideas and gives advise when he is not asked for it. Now, then watch your honey do list grow at a much faster pace. :D .

Tell her since I don't charge anything then that saves you some money for your hobby. Ok, I need to close shop here and resume my life. ;)